We manufacture a stock range of probes to suit the hand hold thermometers and will manufacture custom assemblies to suit your applications for food, liquid, surface, air, compost and immersion temperature measurement.
Specifications:
Wide operating temperature range: -20 to 125 degree celsius
Dielectric strength: 1, 500v ac for one second
Short thermal response time in water, high stability in moisture
Suitable for use in high-temperature and moisture environments
High accuracy, different tolerance available, cost-effective
Customized specifications are welcome
Model FZK8810A QY-EWQ-01
Measurement Method Non-contact type
Power Supply Prompt for low battery charge DC 3V(2 AAA batteries)
Measuring Range 32-42.5 33~43.0
Electricity Prompt Prompt for low battery charge
Measure Distance 1cm-15cm 3~5cm
Fever Alarm Abnormal body temperature alarm 5 beeps in case of the
temperature is higher 38
Measuring Time Measurement time:0.6 second
Maximum Error ±0.2 0.2~0.3
Display Unit Centigrade()
Display Resolution 0.1 0.2~0.3
Automatic Shutdown 15 seconds 20 seconds
Operating Environment 10-40, Humidity 85%
Specification Size 7cm*5cm*19cm 15.5*8.77*4.4cm
Transportation And Storage Environment -20
-55,Humidity 85%
Take temperature readings from a distance, or underwater, using this Waterproof DS18B20 Digital Temperature Sensor. It's got a 90cm (0.9m) cable with a stainless steel, PVC coated probe at the end. You'll be able to use it with any 3V-5V system, and take temperature readings with an accuracy of 9-12 Bits (configurable in code). The best part is that it's digital, meaning you won't suffer any signal degradation over the longer distance.
Waterproof - Take the temperatures of liquids/moist environments with the stainless steel probe. It's shrouded in PVC plastic too, meaning it will hold it's own in temperatures up to 100 degrees Celsius.
Temperature - Usable from -55 degrees Celsius to 125 degrees Celsius. Accuracy of 0.5 degrees.
Digital - The digital interface used to relay the readings guarantees minimal signal degradation over the longer distances (90cm for this standard cable)
1-wire interface - You can have multiple DS18B20s connected to the same central micro-controller pin as each device has a unique identifier hard-coded in.
Long range - 1.5 meters of cable by default, but you can make it longer if needed
Maker friendly - The DS18B20 chip is able to be powered with 3v - 5.5v which is perfect for maker platforms .
HOOK-UP GUIDE
This sensor is simple, you've got 3 wires (Power, Ground and Data). You simply need to connect the data pin to an input pin on your micro-controller and the power and ground to power and ground
You'll also need to connect a resistor between power and signal wires, as shown in the circuit diagram on the Sensor's wiki page.
Specifications
TECHNICAL SPECIFICATIONS
Compatible with 3.0V to 5.5V systems (development board etc)
Within 0.5 degrees Celsius accuracy
Recommended usable temperature range: -55 to 125 degrees Celsius
Select-able 9-12 bit resolution (Factory Default at 12-bit)
1 Wire Interface
Unique 64 bit ID for each sensor
Query time is less than 750ms
Stainless steel tube 6mm diameter by 35mm long
Cable diameter: 4mm
Cable Length: 90cm 100cm 200cm or Customized
Technology character
9331 Bbq Set Temperature Sensor Probe Suppliers
Short on time? Let Bbq Set Temperature Sensor Probe sellers contact you.
DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed.
Product Features
1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly.
DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency .
2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs
130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc.
3.External reference platinum resistance thermometer to reduce calibration uncertainty
In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy.
4.Excellent uniformity of temperature and surface finish on the calibration plane
Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform.
5.Temperature control is accurate, stable, and overshoot temperature is small
The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature.
6.Portable and easy to use
The weight of the whole machine is only 3.5kg, which is small and portable.
Waterproof Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor Probe 15m
Description Of The Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor
Ampfort DS18b20 temperature detector probe adopts the brand-new and original DS18B20 temperature sensor chip, chinese brand chip , GX18B20 produced by Beijing Zhongke Galaxy Core Technology Co., Ltd. belong to scientific research technology resources of the Institute of microelectronics, Chinese Academy of Sciences if you have cost pressure.
Each pin of chip is separated by heat shrinking tube to prevent the short circuit, and sealed inside for waterproof and damp-proof. Its direct "One line Bus" digital transmission greatly improves the anti-jamming capability of system, suitable for field temperature measurement in harsh environments.
At the same time, it is sealed with a high thermal conductivity of sealing rubber strip, to ensure the temperature sensorâ??s high sensitivity, with a very tiny temperature delay. Its measured temperature range is from -55 to +125, in the range of -10~ +85, its accuracy is ±0.5.
When testing it, need to connect the signal end (yellow line) of sensor to the Digital port of microcontroller, meanwhile, need to add a pull-up resistor on the Signal end, or else the test will fail.
Features Of The Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor
* 3.0V ~ 5.5V power supply
* 9 to 12 adjustable resolution
* Wide temperature range of -55 ~ +125
* No external components, a unique single-bus interface
* Red (VCC), yellow (DATA), green (GND)
* Output leads: red (VCC), white (DATA), black (GND)
* Every pin of the chip is sealed and separated by the heat shrink tube. Good for insulation and to prevent short circuit. 3 output lines, * * * * * * VCC/DATA/GND. The exterior is made of PVC plastic tube, which is safe, wear-resistant and waterproof.
* The high quality 304 stainless steel probe, is resistant to high temperature, fast heat conduction and accurate reading.
* The sensor has one unique number and the temperature acquisition device identifies the corresponding temperature sensor by number.
* The field temperature is directly transmitted in the digital way of 1-Wire bus, no need the external components and greatly improves the system's anti-interference. Suitable for the harsh environments.
Internal Wiring Diagram Of The Dallas Maxim DS18B20 Stainless Steel Digital Temperature Sensor
DS18B20 26AWG Cable Power NTC Thermistor 15m Digital Temperature Sensor Probe 2
Pin 1 Soldering to black GND ;
Pin 2 Soldering to white DQ ;
Pin 3 Soldering to red VDD;
Waterproof Meat Probe Thermistor Temperature Sensor 3.3K For Stove Oven Grill Baker
I Description Of Thermistor Temperature Sensor
A meat thermometer is a unit which will measure core temperature of meats while cooking.It will have a metal probe with a sharp point which is pushed into the meat. It should be connected by a flexible heat-resistant silicone cable to oven control board & display.
Some brand models have programmed for auto cooking with the meat probe.
Supply range:3.0V to5.5V
Temperature range:-55 to +110degree Celsius
Wire length:1M/2M/5M...50M optional
Material:stainless steel sheath
Output:3-wire:
Red:+
Black:_
Yellow:signal line
Basic Info
Model NO.: UN-CL37HP
Teeth Whitening Method: Cold Light Whitening
Certification: ISO, CE
Material: PVC
Medical Devices Reg./Record No.: Ehsyjxjyb20150324
Wave Length: 420-480nm
MOQ: 5
Transport Package: Carton
Origin: China
Interface: 4 Holes
Applicable Departments: Oral Department of Internal Medicine
Type: Mechanic Equipment
Medical Device Regulatory Type: Type 2
Working Voltage: AC100-240V, 50/60Hz
Light Intensity: 800 MW/Cm²-1200 MW/Cm²
Trademark: UN
Specification: 800g
HS Code: 9018499000
Product Description
Dental LED curing light with 4 working modes
Function and Features:
* Double function : the Blue light for curing and the Purple light for Caries detector.
* Press M button to change function, no need any other thing to help!
* Use purple light to illuminate teeth, Caries will show Red color, Healthy teeth will show white color.
It will help dentist to remove caries exactly.
* 4 working model : Strong light, Gradually light, Pulse ,and Pre-heating .(The first 10s is with 50% power
light, the rest time is full power light)
* Germany material fiber optic light tip with high articulation.
* LCD Sreem display the working situation clearly .
* Constant light intensity output ,it will not be effected whatever the battery is lower or full power.
* High efficiency for exchange rate from electricity to light. A full charge can be used for more than 200
times continously .
* Bionic sreamline design ,luxury and comfortable to operate.
* Humanized design with battery easy to replace.
* Automatically detection function of charging voltage
* Double protection board for battery
* Using USA imported circuit chips.
* Using BYD battery
* The standby time can be 1 year.
Application Range: It can be used for any brand of resin material.
Technical Data:
Working voltage for adapter: AC100-240V, 50/60HZ
Wave length: 420-480nm
Light intensity: 800 mW/cm²-1200m mW/cm²
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability.
Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Temperature test range: 25 ~ 45 ;
Accuracy: ±0.1°C from 25 to 45°C.
Application site: Skin surface,Rectal/Esophageal
Application: Adult, Pediatric, Neonatal
Compatinle models:Use for Comen and Biolight monitor.
Types:
1.Adult Rectal/Esophageal temperature probe;
2.Adult Skin surface temperature probe;
3.Pediatric Rectal/Esophageal temperature probe;
4.Pediatric Skin surface temperature probe;
5.Neonatal Rectal/Esophageal temperature probe;
6.Neonatal Skin surface temperature probe.
Port:Shenzhen
Delivery Time:3-5 days
Supply Ability: 1000 Piece/Pieces per Week.
Packaging Details:Separate package,then put in outer box.
Payment Terms:L/C,D/A,D/P,T/T,Western Union,Money Gram
Shipping Methods:
1. By express (DHL, FedEx, UPS, TNT, EMS, China Post), Door to door service. Takes about 5-7 days on the way.
2. By air, send order to airport. Have to pick up order at airport and do custom clearance. Takes about 3-5 days on the way.
3. By sea. Send order to seaport. Have to pick up order at seaport and do custom clearance. Takes about 1 month.
Our Services
1.More competitive factory price.
2.Fast delivery (1-5 days, we are a manufacturer, have enough products in stock.)
3.Quality 100% assured (All products are made of medical TPU material)
4.Samples available (accept trial order)
5.One piece MOQ is acceptable.
6.OEM & ODM service.
I Description Of The Stainless Steel Housing Temperature Sensor Chip NTC Thermistor
Ampfort offers Stainless probe assemblies suitable for a wide range of temperature sensing applications. If the dimensions and electrical characteristics on this product wonot work for your requirements, please contact us for further assistance.
1.Temperature probe features XH2.54-2P connector and 15.7 inch (40cm) in length.
2.Mainly used in air conditioner for monitoring temperature, has quick reaction speed.
3.Application : thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system.
II Features Of The Stainless Steel Housing Temperature Sensor Chip NTC Thermistor
Tight Tolerance
Moisture Resistant
PVC Insulated Zip Cord
105�°C Max Operating Temperature
Food grade stainless steel housing
Custom and standard machined metal housings available in brass, stainless steel, aluminum, and exotic alloys
Global engineering support for custom design solutions
UL rated assemblies mateirals for HVACR applications
IV Materials information Of The Stainless Steel Housing Temperature Sensor Chip NTC Thermistor
NO Material Name Item/PN Origin
2-1. Lead wire UL2651#26AWG*2C 105 300V White KL
2-2. Thermistor R25=50K±1% B25/50=3950K±1% MF58 SH
2-3. Epoxy Resin J105/J106B/J05X Black DB
2-4 Shell 5.0*25 Round Head Stainless steel shell XDL
VIII Thermistor
Thermistors are a type of resistor that acts as a temperature-sensing element, generally made of ceramic or polymer. Thermistors exhibit a large change in resistance proportional to a small change in temperature.
Thermistors come in two common types:
NTC (Negative Temperature Coefficient) thermistors In these thermistors resistance decreases as temperature rises. An NTC is commonly used as a temperature sensor, or in series with a circuit as an inrush current limiter.
PTC (Positive Temperature Coefficient) thermistors â?? In these thermistors resistance increases as temperature rises. PTC thermistors are commonly installed in series with a circuit, and used to protect against overcurrent conditions, as resettable fuses.
Food meat smoker oven machine cooking ,drying ,baking ,fumigation ,exhaust,cleaning and other functions.
The fast and slow cycle procedure can be selected according to the process requirements to achieve the best cycle and smoke effect .2.can monitor the smoke temperature,prevent the temperature is too high ,safe and sanitary .3.various types of temperature sensors are available for users to choose. 4.add water circulation cleaning device .
capacity 50-1000kg
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.
Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.
PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
Temperature probe
Name : adult/ child skin surface temperature probe , l=3m, 12mm disk .
Oem part.:409 b
Compatibilities : suitable for ge-marqutte all ; philips: m3928a, m3929a
Mindray all ; nihon kohden ; colin : npb.
G7-H2 Wireless Temperature Sensor System
With G7 temperature wireless sensor and Base Station, you can start monitoring your premises environmental condition online.
Wireless sensor G7 transmits measurement to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus TCP protocol.
G7-Centre App receives data from Base Station over Internet or LAN.
G7 Client App for Windows10, iOS, Android displays and stores all the incoming data in computer/tablet/smartphone for data analysis. By monitoring and understanding how environmental changes, you can adjust your air conditioner or heater to save energy and money.
Applications
water pipes network real time monitoring - water in and out temperature
oil/gas pipes network, pump stations
underground water level real time monitoring
environmental monitoring system - wind/temperature//CO2/pressure
remote Industrial equipment monitoring
rural equipment monitoring e.g. power plant, antenna tower
measuring equipment data capture and report via Wi-Fi
food chain, storage, transport industry, building management
agricultural, farming, laboratory, medical industry
ALUMINA MORTAR (Test Certificate)
General Properties
A. Max service temperature - 1500 oC
B. Maximum grain size - 0 - 1.5 mm
C. Water required for mixing - 22 - 30%
D. Setting - Airsetting
E. Sintering Temp - 1550 oC
Chemical Properties
A. Al2O3 - 50.00%
B. SiO2 - 31.00%
c. Fe2O3 - 5.00%
D. LOI - 7.00%
Physical Properties
A. Dry Density - kg / m3
B. CCS - 17 kg / cm2 after drying at 110C / 24 hr
C. MOR - 20 kg / cm2 at 110 oC/ 24 hr
18 kg/cm2 at 800 C/ 3 hr
Thermal Properties -
A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC
Packaging - 25 - 50 kg bags
Storage Life - 12 months
Delivery State - Dry
9331 Bbq Set Temperature Sensor Probe Suppliers
Short on time? Let Bbq Set Temperature Sensor Probe sellers contact you.
