Product Introduce: Full automatic universal truck tire changer: All movements of the working parts are guide by the movable control platform, particulary suitable for handling truck wheels, farm wheels, passenger car wheels and industrial vehicle wheels between 14"-26" with deep grooved rims, tubeless, with ring. (Max. Wheel
Diameter 1600mm-Max. Wheel width 800mm)
Four-jaw universal chuck
Movable control unit
Locking jaws with different gripping possibility
Hydraulic motor with pressure regulating device
Working arm with quick rotation system
Detailed Materials: Detailed Materials:
Handles wheels from 14"-26"
Maximum wheel diameter 1600mm
Maximum wheel width 800mm
Maximum wheel weight 1270kg
Gearbox motor 2.2Kw
Hydraulic pump motor 1.1Kw
Power supply 220V/380V 3pH
Operating pressure 0~130bar
Net weight 590kg
Noise
Automatic tire changer
Rim clamping from outside:12"-22"
Rim clamping from inside:14"-24"
Max.Wheel diameter:1000mm
Max.Wheel width:410mm
Bead-remover cylinder:2500kg
Operating pressure:10bar
Voltage:110/220v 1 ph;380v 3ph
Motor power:0.75-1.1kw
Max spindle torque:110kg.M
Noise:<70db
Multi-functioncal vw mobile street food cart has its unique advantage,
It allows small entrepreneurs to solve the two difficult problems of location difficulties and rent expensive,the mobile shop decoration costs low,to reduce the responsibility of the entreprencurs,
The most attractive is that it can move at any time,where the customer,where the dining car goes,to solve a series of problems later.
Tire Changer for Tubeless Tires with Wheel Diameter of14 to 56 Inches
Product Description:
Rim Diameter 14"-56"
Maximum wheel diameter
2300mm
Maximum wheel width 1065mm
Maximum wheel weight 1600kg
Gearbox motor 2.2Kw, 380V-3pH-50Hz(220V)
Hydraulic Pump motor 2.2Kw, 380V-3pH-50Hz(220V)
Machine Weight approx 850kg
Operation control voltage 24V
Temperature 0degree~50degree
Noise
60143 Automatic Truck Tire Changer Suppliers
Short on time? Let Automatic Truck Tire Changer sellers contact you.
Product Introduce: Full automatic universal truck tire changer: All movements of the working parts are guide by the movable control platform, particulary suitable for handling truck wheels, farm wheels, passenger car wheels and industrial vehicle wheels between 14"-26" with deep grooved rims, tubeless, with ring. (Max. Wheel
Diameter 1600mm-Max. Wheel width 800mm)
Four-jaw universal chuck
Movable control unit
Locking jaws with different gripping possibility
Hydraulic motor with pressure regulating device
Working arm with quick rotation system
Detailed Materials: Detailed Materials:
Handles wheels from 14"-26"
Maximum wheel diameter 1600mm
Maximum wheel width 800mm
Maximum wheel weight 1270kg
Gearbox motor 2.2Kw
Hydraulic pump motor 1.1Kw
Power supply 220V/380V 3pH
Operating pressure 0~130bar
Net weight 590kg
Noise
Multi-functioncal vw mobile street food cart has its unique advantage,
It allows small entrepreneurs to solve the two difficult problems of location difficulties and rent expensive,the mobile shop decoration costs low,to reduce the responsibility of the entreprencurs,
The most attractive is that it can move at any timewhere the customer,where the dining car goesâ??,to solve a series of problems later.
Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications:
Lifting Capacity: 10,000 lbs (4,536 kg)
Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage
Maximum Reach: Approximately 24 ft (7.4 m)
Dimensions:
Height: 102 inches (259 cm)
Width: 100 inches (254 cm)
Turning Radius: 13.5 ft (4.1 m)
Frame Tilt: 9 degrees each way
Hydraulic Reservoir Capacity: 55.6 gallons (214 liters)
Fuel Tank Capacity: 44 gallons (167 liters)
Boom: Telescopic 3-stage
Steering Modes: 2-wheel, 4-wheel, and crab steering
Fording Depth: Up to 36 inches (91 cm)
Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
Power supply:110v/220v/380v/400v
Motor power:0.75kw/1.1kw
Bead break force:2500kgf
Rim diameter:10''-22''(out) 12''-24''(in)
Rim width:3-16 inche
Max wheel diameter:1000mm
Net weight:266kg
Length:1180mm width:1000mm height:1100
Net weight:266kg gross weight:280kg
Used tires vary greatly in quality Some might only be good for a few months while others might be barely worn and last for several years We offer used tires in 3 different grades All come with our exclusive Trouble Free 30 day Guarantee and free road hazard protection Warranty With over 2000 used tires in stock we are bound to have what you need
Used Tire Grades
Grade A Minimum 34 tread no irregular wear no patches no more than 5 years old
Grade B Minimum 12 tread no major irregular wear no more than 8 years old
Grade C Minimum 13 tread will pass MVI standards not more than 14 years old
Used Tire Prices
12 thru 16 Passenger Grade A
15 thru 16 P Truck Grade A
17 thru 20 Passenger Grade A
15 thru 20 LT Grade A
17 thru 22 P Truck Grade A
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
60143 Automatic Truck Tire Changer Suppliers
Short on time? Let Automatic Truck Tire Changer sellers contact you.