Please click here to check who's online and chat with them.

Find Verified Auto Pressure Transducer (Ceramic) (Apt) Suppliers, Manufacturers and Wholesalers

Apr-13-15
 
APT Key Features
The sensor design is based on ceramic capacitor structure.
All signal processing circuits are gathered together as one application-specific integrated circuit.
Allowable for a wider temperature range (-40¢FXC to +135¢FXC ).
Allowable pressure range is up to 3,000psi.
Precise assembly process; no further adjustment is required after leaving factory.
Absolute or relative pressure sensor.
A reliable package type especially designed for engine and chassis installation.
Accurate and stable output signal.
Able to fit for all auto pressure liquids.
Able to enhance the temperature output.

APT Operation Principle
Mar-09-23
 
Pressure range: -1 600bar (optional)
Accuracy: 0.5%F.S.
Supply voltage: 12 36(24)VDC
Output: 4-20mA (2 wire) 0-10V (3 wire)
Operating temperature: -40 105
Compensation temperature: -20 80
Operating Current: 3mA
Temperature drift (zero & sensitivity): 0.03%FS
Long-term stability: 0.2%FS/year
Response Time: 3ms
Overload pressure: 150%FS
Burst pressure: 300%FS
Cycle life: 500,000 times
Pressure connection: G1/4, NPT1/4
Electrical connection: Hirschman DIN43650C, M12
Housing Material: 304 Stainless steel
Water-proof level: IP65
Explosion-proof level: Exia CT6
Weight: 0.25kg
Medium: non-corrosive environment
Sensor core: Al2O3-96% ceramic sensor
Cable length: 1.0m by default
GOLD Member
Jan-31-22
Supplier From Chongqing, Yuzhong District, China
GOLD Member
Dec-15-23
Supplier From Zibo, Shandong, China
 
JHG silk-screen printed glass is one kind of decorative glass made by printing layer of ceramic ink on the surface of glass through the screen mesh for tempering or heat-strengthening process after. As a result silk-screen printed glass is durable, scratch-proof, solar shading and with anti-glare effect.

Silk screen glass is widely usded for architecture ,home application ,furniture , auto window shild.

Max size 2440*3660mm ,All colour is available .
GOLD Member
Apr-04-21

Syringe

$0.06
MOQ: 500000000  Pieces
Sample Available
 
Auto-disabled Syringe

Sterile Hypodermic Syringes with Needle for Single Use

Prefillable Syringe Glass Cartridge

Vaccine Syringeï¼?Covid-19ï¼?Luer Slip

Vaccine Syringeï¼?Covid-19ï¼?Luer Lock

Clip type safety syringe

High pressure syringe


Sliding Type Safety Syringe
3653 Auto Pressure Transducer (Ceramic) (Apt) Suppliers
Short on time? Let Auto Pressure Transducer (Ceramic) (Apt) sellers contact you.
Jul-03-14
 
Consistent and accurate readings during blood pressure monitoring.



Pressure transducer kit includes:

-- transducer

-- infusion set

-- pressure monitoring line

-- stopcock etc


20pcs/carton
Dec-09-11
 
JD168 series are low range differential pressure transducers and transmitters with NEMA4 (IP-65) rated aluminum. They are very rugged and very reliable, good for many industrial applications.

The patented stainless steel sensor provides good corrosion resistance, excellent performance and long-term stability.
Our unique production setup can also make special pressure range (e. G. -0.5WC to +3.5WC) to meet special applications.

Features:
Up to 15 PSI overpressure on all ranges
Wrong-wiring full protection
Pressure range as low as 10pa only
Application:
Power plant air flowmonitor and controw
Clean room and fime hood control
Duct static pressure control
Draft control
HVAC and VAV control
Furnance air flow control.

Shocking-proof package.
Aug-06-09
 
We have many kinds of connector types, such as edwards, utah, argon, philips, ICU/ medex/ elcam/ abbot/ hospira/ biometrix, ace, bd etc, and also we produce monitor cable which have different connector.


30pcs per box
May-13-19
 
Product Introduction:
SAND PT4XX6 series pressure transducers are ideal for the measurement of melt pressure in extrusion processes at temperatures up to 400 . This series are produced with special materials and alloyed elastic diaphragm together with delicate processing and debugging. The main characteristics are high accuracy and small zero and span shifts caused by changes in process temperatures

Performance Parameters:
Pressure Range: 0 ~ 5 MPA ~ 150 MPA ( 0 ~ 750psi ~ 20000psi );
Accuracy: ±0.5% FS;
Power: 10VDC ( 6 ~ 12 V DC );
Output Signal: 3.33mV/V (Default), 3.0mV/V(Optional) etc.
Probe Heat Resistance:
PT4516 Series: 300°C;
PT4616 and PT4626 Series: 400°C;
Temperature Drift: =500M/500VDC;
Mechanical Connections: 1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. (Optional)
Electrical Connections: 6PIN (SD02106P/SD02106S);
Thermometric Config:
Thermocouple: E, J, K, S type etc.; (PT4626 Series Optional)
Thermal Resistance: Pt100 etc. (PT4626 Series Optional)

Features:
* Anticorrosive wear-resisting coating: apply to high concentrations of rough media pressure measurement,
can improve the service life of 3 to 5 times (optional);
* Special requirement can make to order, delivery date 7 ~ 15 working days;
* Optional supporting intelligent digital pressure meter:
PS1016-43x series, PS4810-43x series, PS4812-43x series and PS9016-43x series.

Order Format:

Example1:
PT4516-350bar-M18-150-3.33mV/V
Note:
Product design Model "PT4516".
Function code "Null" stands for melt pressure transducer.
Coating code "Null" stands for without coating .
Pressure range: 0 ~ 350bar.
Thread size : M18 * 1.5.
Rigid stem length:150mm .
Pressure output signal: 3.33mV/V.
May-13-19

Sand Melt Pressure Transducer

$100 - $300
MOQ: Not Specified
 
Product Introduction:
PT4XX6 series pressure transducers are ideal for the measurement of melt pressure in extrusion processes at temperatures up to 400 . This series are produced with special materials and alloyed elastic diaphragm together with delicate processing and debugging. The main characteristics are high accuracy and small zero and span shifts caused by changes in process temperatures

Performance Parameters:
Pressure Range: 0 ~ 5MPA ~ 150 MPA ( 0 ~ 750psi ~ 20000psi );
Accuracy: ±0.5% FS;
Power: 10VDC ( 6 ~ 12 V DC );
Output Signal: 3.33mV/V (Default), 3.0mV/V(Optional) etc.
Probe Heat Resistance:
PT4516 Series: 300°C;
PT4616 and PT4626 Series: 400°C;
Temperature Drift: =500MΩ/500VDC
Mechanical Connections: 1/2"-20UNF, M10x1.5, M12x1.5, M14x1.5, M18x1.5, M22x1.5 etc. (Optional)
Electrical Connections: 6PIN (SD02106P/SD02106S)
Thermometric Config:
Thermocouple: E, J, K, S type etc.; (PT4626 Series Optional)
Thermal Resistance: Pt100 etc. (PT4626 Series Optional)

Features:
* Anticorrosive wear-resisting coating: apply to high concentrations of rough media pressure measurement,
can improve the service life of 3 to 5 times (optional);
* Special requirement can make to order, delivery date 7 ~ 15 working days;
* Optional supporting intelligent digital pressure meter:

Order Format:
Example1:
PT4516-350bar-M18-150-3.0mV/V
Note:
Product design Model "PT4516".
Function code "Null" stands for melt pressure transducer. 
Coating code "Null" stands for without coating .
Pressure range: 0 ~ 350bar.
Thread size : M18 * 1.5.
Rigid stem length:150mm .
Pressure output signal: 3.0mV/V.
 
Example2:
PT4616-50MPa-1/2"-20-150/470-3.33mV/V
Note:
Product design Model "PT4616".
Function code "Null" stands for melt pressure transducer. 
Coating code "Null" stands for without coating .
Pressure range: 0 ~ 50MPa.
Thread size : 1/2"-20UNF .
Rigid /Flexible length:150mm/470mm .
Pressure output signal: 3.33mV/V.
 
Example3:
PT4626-50MPa-M14-150/470-J-3.33mV/V
Note:
Product design Model "PT4626".
Function code "Null" stands for melt pressure transducer. 
Coating code "Null" stands for without coating .
Pressure range: 0 ~ 50MPa.
Thread size : M14*1.5 .
Rigid /Flexible length:150mm/470mm .
Thermometric config: J type thermocouple temperature sensor .
Pressure output signal: 3.33mV/V.
Jul-11-24
 
inductive pressure transducer BPSN4KB25XFSP19
As a professional industrial product manufacturer and trader, YOYIK not only provides core equipment accessories for power stations, steel and other industries, but also focuses on the development and promotion of environmental protection equipment and is committed to green energy solutions. Relying on its strong R&D capabilities, the company continuously optimizes its product structure, reduces energy consumption, improves energy efficiency, and practices corporate social responsibility with practical actions. YOYIK's products and services are gradually leading the industry towards a more environmentally friendly and efficient future.

Yoyik can offer many spare parts for power plants as below:

#DF-inductive pressure transducer BPSN4KB25XFSP19-DF
Temperature gauge HS75671
Turbine - Speed Transduccer 70C85-1010-423
temperature shock glass WZPM-001
Eddy Current Sensor PR6424/011-100
FUSE 170M8550
LVDT transmitter XCBSQ-03/25-01-12
Switch - ElectroRode DJY2612-115
Bolt electric heating rod ZJ-20-39A
DIFFERENTIAL TRANSDUCER WITH SENSOR DWQZ 25MM
linear differential sensor (Linear variable differential transformer) cá»§a van MSV HTD-150-3
Furnace tube leakage channel detection board JCB-1
Eccentric Monitor MMS6220
speed mornitor ZKZ-3T
Shaft Displacement Preamplifier CWY-D0-810804-01-07-90-02
Fuse â?? LV HRC RS32(NGTC1) 690V-100kA aR [250A]
Sample of electrostatic precipitator control cabinet APF5-820-111D-A
Probe (Sensor) TM0180-A07-B00-C04-D50
Frequency Inverter, 55 kW ACS800-01-0060-3+P901+D150+N652+L50
Guide Vane Opening DYK-11-1015
thermocouple WREK2-334
Conductivity probe 2401B-01
current tranfer LJB1 2000A/10V 0.5
Bolt electric heating rod ZJ-22-23
Xenon flashtube Equivalent XT30 8901309000
pressure sensor transmitter BH-054011-054
SoftLogic control software MPROG-PRO0535E
displacement sensor working DET1000A
Position feedback LVDT TDZ-1E-32
most cost effective electric heater RJ-14.5-120
INTELLIGENT TACHOMETER HY-01
level transmitter 3051DP2A22A1AB4HR5
Differential pressure switch CS-111
Displacement sensor LVDT for GV TD-1-250-10-01-0
Speed sensor CS-1G-D-100-02-00
TRANSDUCER S3(T)-WD-3S-515A4BN
LVDT Sensor 4000TD-15-01
inductive pressure transducer BPSN4KB25XFSP19

inductive pressure transducer BPSN4KB25XFSP19

MY-DFYL-2024-7-11
Oct-12-16
 
Type includes:Silicon Piezoresistive Pressure Sensor,Capsule Pressure Transducer,Pt, Ps Transducer,Pt, Ps Transducer,Intelligent Transducer,Wireless pressure sensor

Performance:
Silicon Piezoresistive Pressure Sensor:
Measurement Range: 0~36MPa;
Tolerance:±3‰;
Temperature Range:?55~?230?
Different structure single or multi sensors can be applied to measure pressure of different gas or liquid;
Output voltage signal or power current signal or digital signal;Size can reach F19mm
Capsule Pressure Transducer
Mainly used on the engines, measuring Pv, Ps, Pt, altitude etc.
Pressure range: 0~36MPa, accuracy: ±1.5%;
Temperature range: ?55~?220?;
Major types: inductor, differential transformer, potentiometer etc.
Pt, Ps Transducer
Flow speed is held to be zero in the Pt cavity at the pitot front end. Therefore, the pressure measured is Pt. Ps can be measured by the side orifices. Pt-Ps=Pd.
Altitude Transducer
Measuring flight altitude, transforming the absolute pressure to a voltage output
Intelligent Transducer?
Sensing Pt & Ps, receiving resistance single of the temperature, and AOA voltage single from AOA Transducer. After error correction, it calculates the flight air data per the air data equation and supplies the results to other systems.
Altitude & Velocity Transducer
Used on aircrafts, measuring altitude, velocity and acceleration. Input is Pt, Ps, Pd and output is DC voltage, in proprtion with input signals. Ps is a dual-channel independent signal. Acceleration DC voltage signal in X, Y, Z axes and temperature signal are available.
AWP Wireless pressure sensor
Characters:
1.Low power consumption, long standby time
2.wide pressure measurement range10kPa~10MPa
3.Adjustable sampling rate(10min~12h)
4.Zigbee wireless communication protocol
5.long distance transmission
6.Full Metal Package with the IP65/67 Protection class
7.Good appearance
GOLD Member
VERIFIED
Jul-02-24

Oracle Touch Automatic Coffee Machine

$150
MOQ: 5  Pieces
Sample Available
Supplier From Ontario, Canada
 
Adjustable coffee spout: 80 to 140mm

Adjustable coffee temperature from 80 to 90

Liquid crystal display:5 inches

Pump Pressure(ULKA Pump from Italy)

Adjustable coffee volume: 30-250ml

In accordance with ERP standby power consumption

One touch cappuchine,Latte,Espresso,Americano,Hot water,Hot milk,Milk frother function

Removable waste coffee cake drawer

Stand-by/Auto cut off functions
Coffee powder brewing function

Self-cleaning programmed/rinsing programmed

Water shortage warming

Multi-manual operation language (4 Languages)
Mar-09-23
 
Pressure range: -1 20 bar(optional)

Accuracy: 1%F.S.

Supply voltage: 5VDC, 12VDC, 3.3VDC

Output: 0.5-4.5V, Others on request

Operating temperature: -40 105

Compensation temperature: -20 80

Operating Current: 3mA

Temperature drift (zero & sensitivity): 0.03%FS

Long-term stability: 0.2%FS/year

Response Time: 4ms

Overload pressure: 150%FS

Burst pressure: 300%FS

Cycle life: 500,000 times

Pressure connection: NPT1/8 by default, Others on request

Electrical connection: Packard connection

Housing Material: Copper Shell

Water-proof level: IP65

Explosion-proof level: Exia CT6

Weight: 0.08kg

Medium: non-corrosive environment

Sensor core: Al2O3-96% ceramic sensor

Cable length: 0.3m for Packard, 0.5m for plastic direct cable by default
GOLD Member
VERIFIED
Jan-10-20
Supplier From Morbi, Gujarat, India
 
Smart Home Appliances
Climate Control
Oil Heaters
OOH
11F
Grey

International Ergonomic Design & Styling
11 Fins with 3 Heat Settings 1000W / 1500W / 2500W
Adjustable Thermostat to Maintain Desired Room Temperature
Triple Safety Features: Safety Dumping Switch to Safeguard against tilting
Manually Reset Thermal Cut-out
Auto Reset Thermal Cut-out; Noiseless Operations
Power ON Indicator
Caster Wheels for Easy Mobility
Cord Winder
Built in Handle
Less suffocation as it doesn?t burn oxygen. 400W PTC ceramic heating element with motor for faster heating
GOLD Member
Jun-04-24
Supplier From Mumbai, Maharashtra, India
Apr-02-10
 
Features:

1. Pressure ranges: 0~10, ..., 0~3000 bar
2. Output signals: 4~20 ma, 0~5 v or 0~10 v
3. High precision: up to 0.05%fso (applicable for range >16barg)
4. Temperature coefficients of zero & span: 0.005%fso
5. Flush membrane available for pressure range > 16 barg
6. Integrated design for 100% pressure seal, no o-ring built in its body
7. Materials: 304 ss (housing); 17-4ph (wetted parts)



Oem inner box and carton
GOLD Member
Apr-29-24

Lithium Hydroxide Cas 1310-65-2

$20
MOQ: 1  Kilograms
Sample Available
 
Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times
It can be used as an absorbent for carbon dioxide and can purify the air in submarines
The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol
It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries
Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures
Carbon dioxide scrubbing
Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water
It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control
GOLD Member
VERIFIED
Oct-25-20
Supplier From Rajkot, Gujarat, India
 
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.

specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)

characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
GOLD Member
VERIFIED
Oct-25-20
Supplier From Rajkot, Gujarat, India
 
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.

specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
3653 Auto Pressure Transducer (Ceramic) (Apt) Suppliers
Short on time? Let Auto Pressure Transducer (Ceramic) (Apt) sellers contact you.