Product name:stainless steel plate
All materials:304, 304l, 316, 316l, 321, 310s, 309s, 317, 201, 202, 410, 420, 430, 904l
Surface:no.1, 2b, no.4, ba, 8k, hl, hairline, mirror finish, brush, polished, sand blast
Standard: aisi, astm, jis, en, din, gb
Grade: 300/400/200 series(310s .309s. 316ti. 316l. 304l. 321 .....)
Technical treatment: hot rolled/cold rolled
Thickness: 0.4mm to 4mm
Width1000mm, 1219mm, 1220mm, 1500mm, 1800mm
Length2000mm, 2438mm, 2400mm, 3000mm, 6000mm
Application:
Kitchenware, tanks, food processing, cutlery, construction, household hardware, surgical instruments, major appliances, industrial equipment and as an automotive and aerospace structural alloy.
Packagein bundles, packed with water proof paper and wooden pallet. To be packed strongly avoid damage during transportation, and can be also according to the regulations and customers requests. Furthermore, products packages also are tagged clear on the outside for easy identification of the product and quality information.
430 Stainless Steel Strip Specifications
Grade: 430
Standard: ASTM/EN/JIS
Thickness: 0.03mm-5.0 mm
Width: 8.5mm-600 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
430 Stainless Steel Strip Introductions
430 stainless steel strip is a general purpose stainless steel with good corrosion resistance.
It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance.
Due to addition of stabilizing element titanium, it has good mechanical properties of welding.
Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower.
430 Stainless Steel Strip Applications
430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware.
430 Stainless Steel Strip Chemical Composition
The chemical components of grade 430 stainless steel strip is summarized in the following table:
Grade Standard C Si Mn P S Cr Ni Mo
430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
430 Annealed Stainless Steel Strip
Extra Bright Annealed Soft Temper 430 Stainless Strip Steel is the most popular of all the straight chrome stainless steels Its principal use is for decorative purposes Because of its excellent heat and corrosion resistant properties its ductility and because it costs less than the chromenickel grades this Type 430 Stainless Steel Strip is used in countless applications These uses are primarily for stainless and decorative purposes including household appliances metal molding metal trim cabinet hardware hinges drawn and formed parts and stampings
Type 430 Ferritic Stainless Steel Strip Characterisings
Corrosion and heat resistant
Ductility at about 75 of low carbon strip
Similar to chromium grades with stretcher strains
Roping can result from excessive stretching
Able to weld for nonrigorous service
Magnetic in all conditions
Tensile strength annealed condition minimum of 65000 PSI yield of 30000 PSI elongation at 22
1.2m-12m or according to customer's special request
width
610,760,840,900,914,1000,1200,1250mm
Tolerance
Thickness: +/-0.02mm, Width:+/-2mm
Material grade
Q195 Q215 Q235 Q345
SS490 SM400 SM490 SPHC SPHD SPHE SPHF
SEA1002 SEA1006 SEA1008 SEA1010
S25C S35C S45C
65Mn
SPHT1 SPHT2 SPH3 SPH4
QstE
Others as your requirement
surface
iron gray (low carbon plate), brown (special alloy plate, the high carbon plate), partial ochre (weather resistance), with temperature oxidation pattern, than manufacture rough surface
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Decoration,Industry,food processing and medical industry ,ships building industry etc.
Certification
SGS, BV, IQI, TUV, ISO, CE, etc
Coil Weight
3-10 Tons Or As Your Requirements
Tolerance
±1%
MOQ
1 ton
Supply Ability
5000 tons / month
Lead Time
7-15 working days after the receipt of 30% deposit
Payment Terms
30%T/T Advance + 70% Balance
Price Terms
FOB, CFR, CIF, EXW
Packing
Standard sea-worthy package or as required
Characteristics of 440 Stainless Steel Coil:
Excellent work hardening (non-magnetic);
Excellent high temperature strength;
No magnetism in solid solution state;
Cold rolled products have good gloss and beautiful appearance.
Uses: seawater equipment, chemical, dye, paper making, oxalic acid, fertilizer and other production equipment; Photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts.
440 is widely used in the chemical industry because of its excellent corrosion resistance. 440 is also a derivative steel of 18-8 austenitic stainless steel, with 2 ~ 3% Mo added. On the basis of 440, many steel grades are also derived. For example, 440Ti is derived after adding a small amount of Ti,440 is derived after adding a small amount of N, and 317L is derived by increasing the content of Ni and mo
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
