Pine timber - also referred to redwood timber, commonly also known under its latin name "Pinus Sylvetris" is the most widely spread in the East European Countries. The tree is generally 30m high with a diameter of about 1m but larger trees may be found on favorable sites.
Big sizes - beams
Thickness - from 100 mm up to 300 mm
Width - from 100 mm up to 300 mm
Length - from 3000 mm up to 5400 mm
Small sizes - beams
Thickness - from 40 mm up to 95 mm
Width - from 60 mm up to 95 mm
Length - from 3000 mm up to 5400 mm
Boards
Big sizes - beams
Thickness - from 20 mm up to 50 mm
Width - from 50 mm up to 200 mm
Length - from 3000 mm up to 5400 mm
Spruce timber - commonly also known under its latin name "Picea Abies" is widely distributed throughout continental Europe and is a timber tree of major economic importance. The large tree usually has a straight, cylindrical trunk and growns to a height of about 30 m (up to 55 m), with a large diameter of about 60 cm (up to 1,5m).
Big sizes - beams:
Thickness - from 100 up to 300 mm
Width - from 100 up to 300 mm
Length - 3000/4000/5000 mm
Small size - beams:
Thickness - from 40 up to 95 mm
Width - from 60 up to 95 mm
Length - 3000/4000/5000 mm
Boards:
Thickness - from 18 up to 50 mm
Width - from 50 up to 250 mm
Length - 3000/4000/5000 mm
Formwork H20 Timber Beam (Wood Girder)
A) Flange: pine LVL flange and solid sawn pine lumber flange
B) Pine plywood web.
C) WBP phenolic resin
D) Painting on the surface of flange and web: with yellow, waterproof, fireproof, rot-proof and frozen-proof
painting, and the painting is environment friendly, meeting the environmental protection request
Formwork H20 Timber Beam (Wood Girder)
A) Flange: pine LVL flange and solid sawn pine lumber flange
B) Pine plywood web.
C) WBP phenolic resin
D) Painting on the surface of flange and web: with yellow, waterproof, fireproof, rot-proof and frozen-proof
painting, and the painting is environment friendly, meeting the environmental protection request
Timber beam could be widely used in slab formwork, wall formwork, timber structure, and other temporary structures.
High stiffness, light weight, strong load-carrying capability.
The standard sizeof timber beam 200mm(height)x80mm(width)x40m(flange)x30mm(web thickness)
Standard length: 1.2m, 2.4m, 3.6m, 4.8m
Other beam length or web thickness available on request.
2038 Adjustable H20 Timber Beam Formwork For Slant Co Suppliers
Short on time? Let Adjustable H20 Timber Beam Formwork For Slant Co sellers contact you.
H20 Timber Beam
At present,we have large-scale woodwork shop and first-class wood beam production line, with daily output of 3000m of wooden beams.
Standard holes can be punched on both ends of the wood beam. During construction, the wooden beam can be lengthed as per need. we can also customize wooden beams into any length for your need.
The wooden beams is an important part of the wooden formwork system and is widely used in engineering.
Beam Height :200mm
Flange Wall 40*80mm(width 80mm Thickness 40mm)
Web Thickness:30mm
Length :customized
Shear capacity: 24KN
Moisture content : less than 12% at the time of delivery .
Painting: waterproof yellow painting or other color as customers request.
Density :4.8-5.5 kg/m
Gule : WBP glue
Payment Terms : 30% deposit, 70% before delivery; By T/T
Delivery time :15-20 days after getting your deposit
1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc.
2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products.
3.Polyethylene glycol series products can be used as raw materials for ester surfactants.
4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry.
5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.
6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler.
7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity.
Properties of urea
Urea, also known as carbamide, carbamide and urea. Pure urea is white, tasteless, odorless, needle shaped or prismatic crystal, with a melting point of 132.7 â?? under normal pressure. It is hygroscopic, deliquescent, hydrolyzable, and weakly alkaline. It is made into compound fertilizer with acid fertilizer. Urea is an organic compound composed of carbon, nitrogen, oxygen and hydrogen. It is a white crystal. Urea is one of the simplest organic compounds. The most important use of urea is as fertilizer. Its nitrogen content is more than 46%. After being converted into ammonium carbonate in soil, urea is hydrolyzed and absorbed by plants. It is the nitrogen fertilizer with the highest nitrogen content at present.
Molecular formula of urea: CO (NH2) 2, molecular weight 60.06, density 1.335g/cm �³ï¼? The melting point is 132.7 â??. Soluble in water and alcohol, insoluble in ether and chloroform. It is slightly alkaline. It can react with acid to form salt. It has hydrolysis. Condensation reaction can be carried out at high temperature to produce biuret, triuret and cyanuric acid. Heat to 160 â?? and decompose to generate ammonia gas and turn into cyanic acid at the same time. Urea can be hydrolyzed into ammonia and carbon dioxide under the action of acid, alkali and enzyme (acid and alkali need to be heated). Unstable to heat, heat to 150 â??ï½? 160 â?? to deamination to biuret. Urea is easily soluble in water, 105g can be dissolved in 100ml water at 20 â??, and the aqueous solution shows neutral reaction. There are two kinds of urea products: crystalline urea is white acicular or prismatic crystal with strong hygroscopicity; Granular urea is a translucent particle with a particle size of 1~2mm, which has a smooth appearance and improved moisture absorption.
Urea is a physiologically neutral fertilizer, which does not leave any harmful substances in the soil and has no adverse effects after long-term application. However, a small amount of biuret, also known as biuret, will be produced when the temperature is too high during granulation, which has an inhibitory effect on crops. Urea is molecular before conversion and cannot be adsorbed by soil, so it should be prevented from being lost with water; The ammonia formed after conversion is also volatile, so urea should also be deeply covered with soil. Urea is the first synthetic organic substance and widely exists in nature, such as 0.4% urea in fresh human feces.
The new version of national standard GB/T2440-2017 for urea has been officially implemented since July 1, 2018. Compared with the replaced 2001 standard, certain adjustments have been made.
New standard GB/T2440-2017
H timber beam are composed of solid wood or lvl flange, and solid plywood, particle board or osb web.Bond with weathering resistant glue, coat with antiseptic and waterproof painting.H20 timber beams are widely applied in slab formwork system, wall formwork system, column formwork system, timber structures, and other temporary bearing structures.
Technical information:
The standard size of wood h beam: h16, h20, h24.
Standard lengths: 2.45m, 2.9m, 3.0m, 3.3m, 3.6m, 3.9m, 4.9m, 5.9m.
Other beam length or web thickness available on request.
H timber beam can be used in wooden structure and temporary bearing structure.
Technical information:
The standard size of wood h beam: h16, h20, h24.
Standard lengths: 2.45m, 2.9m, 3.0m, 3.3m, 3.6m, 3.9m, 4.9m, 5.9m.
Other beam length or web thickness available on request.
Technical information:
The standard size of wood h beam: h16, h20, h24.
Standard lengths: 2.45m, 2.9m, 3.0m, 3.3m, 3.6m, 3.9m, 4.9m, 5.9m.
Other beam length or web thickness available on request.
Technical information:
The standard size of wood h beam: h16, h20, h24.
Standard lengths: 2.45m, 2.9m, 3.0m, 3.3m, 3.6m, 3.9m, 4.9m, 5.9m.
Other beam length or web thickness available on request.
H timber beam are composed of solid wood or lvl flange, and solid plywood, particle board or osb web.Bond with weathering resistant glue, coat with antiseptic and waterproof painting.H20 timber beams are widely applied in slab formwork system, wall formwork system, column formwork system, timber structures, and other temporary bearing structures.
In the construction of modern ferroconcrete formwork engineering, h timber beam is mainly used in the erection of roof formwork system, wall formwork system and column formwork system..Besides, h timber beam can be used in wooden structure and temporary bearing structure.
Technical information:
The standard size of wood h beam: h16, h20, h24.
Standard lengths: 2.45m, 2.9m, 3.0m, 3.3m, 3.6m, 3.9m, 4.9m, 5.9m.
Other beam length or web thickness available on request.
H20 timber beam formwork for rectangle, square concrete column formwork
Description:
1. Structure sketch
Tbc system-a is a kind of formwork for pouring square or rectangle column, it is composed of four pieces of tim-formwork, yoke, tie rod, wing nut, etc.
It will be designed according to column¡¡£¤s size; the formwork¡¡£¤s dimension is not adjustable.
Competitive advantage:
1. Prefabricated connection, convenient and efficient.
2. Light weight but high bearing capacity.
For conventional design, its load bearing capacity is 80kn/m2 with weight of 55-65kg/m2.
If required, the formwork can be specially designed for higher concrete pressures.
3. Timber is easy resized, so the tim-formwork is relatively easier to change self¡¡£¤s size and shape. This approved formwork¡¡£¤s economical efficiency.
In bulk, assembly on site according to assembly drawing.
Perumbavur Plywood The Hub of PremiumQuality Plywood
Perumbavur located in Kerala India is renowned as one of the largest plywood manufacturing hubs in the country With decades of expertise in the timber and wood processing industry Perumbavur plywood is known for its durability strength and highquality finishing It is widely used in furniture interior decor construction and industrial applications
Key Features of Perumbavoor Plywood
HighQuality Timber Sourced from premium hardwood and plantation wood for superior strength
Moisture and Termite Resistant Treated to withstand humidity and prevent pest infestations
Variety of Grades Available in MR Moisture Resistant BWR Boiling Water Resistant and Marine Grade for different applications
EcoFriendly Production Manufactured using sustainable wood sources and lowemission adhesives
Smooth Finish and Easy Workability Ideal for furniture cabinets and decorative panels
Applications of Perumbavur Plywood
Furniture Manufacturing Widely used for making tables wardrobes and modular kitchens
Interior Paneling Decor Preferred for wall panels ceilings and partitions
Construction Industrial Use Used in shuttering formwork and structural applications
Doors Windows Provides a sturdy and longlasting framework
Packaging Availability
Available in standard sizes 6mm 9mm 12mm 18mm 25mm thickness or as per customer requirements
Supplied in customized bulk orders for domestic and international markets
Perumbavoor plywood is a trusted choice for builders architects and furniture manufacturers offering high durability and aesthetic appeal at competitive prices
LVL Laminated Veneer Lumber for construction, packaging, furniture and other industry with high quality made from Leloi Global factory.
We produce and supply many kind of LVL
as:
LVL Structural Timber
LVL for furniture parts.
LVL for packing.
Above products are different to each other,
from the quality to the price as well.
We specially use all A grade local wood veneer
for this product. Vietnam local wood species which made LVL look bright white and eye catching.
We are Indonesia Wood Working Manufacturer and Sawn Timber supplier integrated with own sawmill and KD rooms ##
# We supply vary kind of wood species :
Red Meranti - Pine - Bangkirai - Rubberwood - Mahogany - Acacia - Albasia Falcata - Mix Hardwood
## Sizes by demand ##
Product items :
Sawn Timber , KD
S4S or E2E Plank ## Finger Jointed Sticks ## Pallets ## and its similar products ##
3 Layers laminated beam ****
Payment by Bank transfer only ## We do not accept L/C so please do not send any inquiry for L/C buyers
H20 timber beam is used for concrete formwork construction. It is widely applied in slab/table formwork system, wall formwork system, timber structures and other temporary bearing structures.
Characteristics:
With high standardization, universal property, fast operations.
High stiffness, light weight and strong load-carrying capability.
Simple assembly and disassembly, flexible applications make the easy way to operate on building site.
Low cost, recycle resource, environmental protection, can be repeatedly used.
Weight per running meter: 5.2- 5.8kg.
Mechanical specification:
Bending moment max.5 KN/M
Cutting action max 10.0KN
Bending max1/500
Live load max 1.5 KN/M2.
In standard export pallet
2038 Adjustable H20 Timber Beam Formwork For Slant Co Suppliers
Short on time? Let Adjustable H20 Timber Beam Formwork For Slant Co sellers contact you.
