Digital to Analog Converters - DAC QUAD 16-BIT +/-15V DAC
Resolution: 16 bit
Sampling Rate: 1.26 MS/s
Number of Channels: 4 Channel
Settling Time: 8 us
Output Type: Voltage
Interface Type: 3-Wire
Analog Supply Voltage: +/- 11.4 V to +/- 16.5 V
Digital Supply Voltage: 2.7 V to 5.25 V
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C
Package / Case: TQFP-32
Number of Converters: 4 Converter
Pd - Power Dissipation: 381 mW
FPG:250PCS
Supply Voltage - Max: 16.5 V
Supply Voltage - Min: 11.4 V
Subcategory: Data Converter ICs
Introduction:
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.
Features:
This Converter has many features that enable it to perform in a superior manner. Among those features you will find:
1. Converts Coaxial or Toslink digital audio signals to analog L/R audio
2. Supports sampling rate at 32, 44.1, 48 and 96 KHz.
3. 24-bit S/PDIF incoming bit stream on left and right channels
4. Provides electromagnetic-noise-free transmission.
5. Easy to install and simple to operate.
1.This converter has many features that enable it to perform in a superior manner.Among those features you will find: 2.Converter coaxial or toslink digital audio signals to analog l/r audio 3.Supports sampling rate at 32, 44.1, 48 and 96 khz. 4. 24-bit s/pdif incoming bit stream on left and right channels 5.Provides electromagnetic-noise-free transmission. 6.Easy to install and simple to oprate.
1501 Ad5421Brez Digital Analog Converters 16Bit Suppliers
Short on time? Let Ad5421Brez Digital Analog Converters 16Bit sellers contact you.
On grid / Grid-tied
Rated power: 5000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 6000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 15000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 12000W
No. of MPPT: 2
Strings per MPPT: 2+1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 24.8kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 10000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 8000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 23.2kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
Blue Jay Technology offers the industry's best selection of isolators. Dozens of models are now available to meet your needs. Select from single and dual-channel models with AC, DC, or loop-powered operation. Signal splitters deliver dual outputs from a single source. And whether you need a unit that sinks or sources current, Blue Jay has the right solution for you.
Optical or galvanic isolation eliminate ground loop errors, reduce noise, and block high voltage transient surges. Our multi-channel modules reduce costs and save space. Models with push-button calibration simplify installation and maintenance tasks. Units with mini USB port preset for 4-20mA input/output required.
Features
·Support universal Input Signal
·Provide 26...18VDC input loop power
·TC/RTD sensor broken alarm
·Low Temp. drift. Auto zero calibrating
·Loop Power current limitation protection (30mA)
·Over-current protection for input current (50mA)
·Current output can be set inverse proportional output
·Programmed by USB or adaptor
·w/o external power supply
·Back board designed with redundant power-supply interfaces
Scunoe video digital fiber converter transceivers can simultaneously transmit 1-64 channels of 8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / ethernet /telephone / dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in alications where the cameras have p/t/z capabilities. Plug and play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. Led indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation , which is suitable for different working environment .
Product characteristics
1. 8-bit digitally encoded and non-compression video transmission
2. Directly compatible with ntsc, pal, and secam cctv camera systems and support rs-232, rs-422, and rs-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible pal, ntsc and secam video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range , no electrical or optical adjustments required .
8. Special asic design .
9. Industry-grade of operating temperature from -10 to 75 , which is alied to the different working environment
10. Hot-swap function
11. Stand-alone type or card-type installed in 19í»í» 2u or 4u rack-mount chassis.
Operating voltage: dc5v (we will offer external ower suly from ac96-240v to dc5v for each unit)
Operating temperature: -10 to +75
Storing temperature: -55 to +85
Humidity: 0 to 95% non-condensing
Application :
Intelligent transportation system
Connection of sub-network for surveillance center
Public security surveillance
High way & toll station surveillance
Industrial closed circuit television surveillance
Formatters
Random
Regex
Text
More
Boost your career. Start a 10-day free trial at Pluralsight.
Regex Tools
Remove Special Characters
Remove Special Characters
The tool can be used to remove special characters from text. More.
Input | Keep alphanumeric & spaces only
299 char(s)
Type Honey mango
Taste soft sour and sweet
Shelf life at least 12 months
Origin Ho Chi Minh City Vietnam
Process Air Dry with 15 sugar
No other preservatives additives non SO2
Quantity capacity 50 tonsmonth Min order quantity no
Packaging in 10kgs carton 1x20ft 135mts buyers brand available
Output
299 char(s)
Type Honey mango
Taste soft sour and sweet
Shelf life at least 12 months
Origin Ho Chi Minh City Vietnam
Process Air Dry with 15 sugar
No other preservatives additives non SO2
Quantity capacity 50 tonsmonth Min order quantity no
Packaging in 10kgs carton 1x20ft 135mts buyers brand available
This is a client-side utility. Your data will NOT leave your own browser.
Copy shareable link is limited to 5,000 characters as it uses a client-side feature.
How it works?
Remove Special Characters online: The tool can be used to remove special characters from text.
Keep alphanumeric & spaces only: Remove all non-alphanumeric & and non-spaces characters from the text.
Keep alphanumeric only: Remove all non-alphanumeric characters from the text.
Keep numeric & spaces only: Remove all non-numeric & non-space characters from the text.
Keep numeric-only: Remove all non-numeric characters from the text.
Keep ASCII only: Remove all non-ASCII characters from the text.
See the examples of usage below.
Examples
Input (Keep alphanumeric & spaces only)
!#This tool removes $special *characters* /other/ than! digits, characters and spaces!!!$
Output (Keep alphanumeric & spaces only)
This tool removes special characters other than digits characters and spaces
Tutorials
How to remove special characters from text
Follow these steps to quickly delete unwanted symbols from the input.
Prepare your text
Have your text with unwanted characters ready.
Enter the data
Paste your data or load the file into the input area.
Select the option
Click on the "Options" and select the desired character set you want to keep.
Submit
Click the "Submit" button. You should now see the clear text output.
All done
Your data is ready. Click the "Copy to Clipboard" button and you should be ready to rock!
Additional Resources
Alphanumeric characters - Wikipedia
Remove special characters using JavaScript - HowToBits.com
Related tools
Extract emails from text
Extract URLs from text
Hashtag Extractor
IP Extractor
Looking for something else?
In case you are looking for something else than this functionality, please let us know by contacting us. The most common requests will be made available (for free) once possible.
Share the word
Text-Utils.com is one of the most powerful, secure and free websites containing various tools for helping with your daily tasks, such as online formatters (XML, JSON, SQL and HTML), encoding (Base64, Hashes), converters (binary, XML, JSON), multiple text tools, such as to remove duplicate lines, extract text and much more. Enjoy all for free!
