6 Ton Dumper truck for mining, 6 ton loading capacity dumper truck
The four-dump truck has a compact structure. Through the design of the cab (front part), suspension, frame, cargo compartment, lifting mechanism, etc., the structure is compact, the turning radius is small, and it is extremely flexible.The whole vehicle is based on the design concept of mining vehicles and is scientifically and reasonably configured.This Mining Dump Truck is usually for underground or on ground transportation of ores, with the advantages of good possibility, good safety, strong power and strong carrying capacity.
It usually used with the mucking machine together.
Product specification table
Model 4TON 5 Ton 6 Ton 8 Ton 10 Ton 12 Ton 14 Ton 16 Ton
Engine power 42KW 63KW 70KW 95HP 95HP 110HP 130HP 160HP
Axle model Frount axle 2040 Front axle 1069 Front axle 1069 Front axle 1098 Front axle LN1098 Front axle 1098 Front axle 1098 Front axle LN153
Axle model Rear axle Isuzu Back axle 1069 Back axle 1069 Back axle 1098 Front axle LN1098 Back axle 1098 Back axle 1098 Front axle LN153
Dimensions of carriage 2400*1500*450 2800*1600*600 2850*1600*500 3000*1800*600 3200*1800*600 3400*2000*700 3500*2000*800 3900*2200*800
Carriage thickness Bottom 6 side 5 Bottom 8 side 6 Bottom 8 side 5 Bottom 8 side 6 Bottom 8 side 6 Bottom 8 side 6 Bottom 8 side 6 Bottom 12 side 8
Tyre model 700-16 mining tyre(Rear single wheel) 700-16 mining tyre(Rear two wheels) 700-16 mining tyre 750-16 mining tyre 750-16 mining tyre 750-16 mining tyre 825-16 mining tyre 900-20 mining tyre
Hydraulic cylinder model 110*900 115*900 115*1000 115*1200 115*1200 115*1200 130*1300 130*1200
Steering method Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering
Exhaust gas treatment Water treatment Water treatment Water treatment Water treatment Water treatment Water treatment Water treatment Water treatment
Driving style Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive
Cab Simple roof Simple roof Simple roof Simple roof Simple roof Simple roof Simple roof Simple roof
Dimensions 4000*1500*1300 4300*1850*1600 4600*1630*1500 4700*1800*1650 4900*1800*1650 5150*2000*1700 5250*2000*1900 5800*2250*1990
Man-machine height 1.8m 1.8m 1.9M 1.9M 1.9M 1.9M 2.1M 2.2M
Gear mode Gear shift Gear shift Gear shift Gear shift Gear shift Gear shift Gear shift Gear shift
Load capacity 4 Ton 5 Ton 6 Ton 8 Ton 10 Ton 12 Ton 14 Ton 16 Ton
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
25767 6 Ton Loading Capacity Dumper Truck Suppliers
Short on time? Let 6 Ton Loading Capacity Dumper Truck sellers contact you.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
Botanical name Cicer arietinum
Taste Typical
Odor Odourless, no foreign odours
Color Typical, beige/yellow
Production area 4000 Tons
Caliber 6 mm to 9 mm
Packing White polypropylene packaging bag of 25 kg y 50 kg
Loading 20 feet: 24 metric tonnes
ANALYSIS VALUES
Foreign bodies 1.00% max
Insect damage 0.50% min
Moisture 14.00% max
Stained grains 1.00% max
Slightly stained 3.00% max
Broken 1.00% max
