Find Verified 4X4 Fiberglass Mesh For External Wall Insulation Suppliers, Manufacturers and Wholesalers

Mesh: 5mmX5mm, 4mmX4mm
Weight: 40g----165g/m2
Width: 1m-----2m
Length: 50m - 100m or according to customer's requirement.
Color: white, blue, black, etc.

Special specification as customer's request.

Features: light weight, high strength, high temperature resistance, alkali resistance, waterproof, corrosion resistance, anti cracking, dimensional stability, etc..

We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol

Hole size:4X4,5X5,10X10 etc.
Weight:45g/m2,90g/m2,130g/m2,165g/m2 etc
Width:10cm-200cm Length:10m-500m
Color:white,black,yellow,blue etc
Packing:woven bag or carton

XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations.

B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.

Alkali-resistant fiberglassmeshhas excellent properties including water-resistance, alkali-resistance, flexibility, softness and resistance to aging. It is widely used in reinforcing walls, natural marble, plaster board, artificial stonematerialsand exterior insulation finishing system. It is also widely used for renovating building surface.
Fiberglass mesh is very durable, versatile and cost-effective. It is the building material which is suitable for all kinds of architectural styles and shapes.
45 g/m2, 51 g/m2, 70 g/m2, 75 g/m2, 140 g/m2, 145 g/m2, 160 g/m2, 165 g/m2.
Hole size: 2.3 mm 2.3 mm, 2.5 mm 2.5 mm, 4 mm 4 mm, 5 mm 5 mm.
Width:50 mm to 2000 mm.
Roll length:10 meters to 300 meters.
Packing: woven bag or carton.
Colors available:white (standard), blue, yellow, orange, black, green or according to requirements.

Glass fiber mesh cloth alkali resistant and crack resistant plastering of internal and external walls on construction site

Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO
starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).

APPLICATIONS
1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes.
2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to
the pasteurized milk and stir slowly to ensure full dissolving at 80C.
3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the
temperature at 70�° C.
4. Keep Slow stirring for complete separation of solids and whey.
(Indication: Whey will turn to light green color and small lumps of solids
will settle down)
5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer.
6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop.
7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then
dip in chilled water for 4 hours.
DOSAGE
Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need
to be used.

black fiberglass tissue can offer widest range of woven fabrics which are made of E-glass yarn. Our woven glass fabrics are manufacture with state of the art weaving technology and the best control over thickness, weight and strength.We can offers the materials engineer a wide choice of control fabric properties to satisfy design needs and objectives. Our extensive range of Fibreglass fabrics are globally recognised for its quality.

black fiberglass tissue with fire retardant and alkali-free performance, is suitable as a surface lamination for fiberglass wool and rock wool thermal insulation.

Since 2010 we are engaged in trading & exports of ceramic products, very high Quality of Zirconium Silicates & Zirconium Flours for ceramics.

We mostly supply Zirconium 2, Zirconium 5 and Zirconium Flour 325 mesh to ceramic industries.

Application Of Zirconium Silicates :
Opacifier for pottery and porcelain glazes ,wall tiles, roofing tiles, sanitary ware etc
Frits, Glazes & Enamels.
Admixture for ceramic body. (Improvement of property and Opacification of color)


Typical Chemical Properties
Composition - Zirconium Silicate (ZrSiO4)
Zirconia + Hafnia (ZrO2 + HfO2) : 65.00% Min.
Silica (SiO2) : 35.00% Max.
Alumina (Al2O3) : 00.70% Max.
Titania (TiO2) : 00.20% Max.
Ferric Oxide ( Fe2O3) : 00.10% Max.

rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5
Density 0.92 �± 0.015
Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters.

Origin: United Kingdom

Material: LDPE Repro pellets Yellow

Category: LDPE

Type: Repro pellets

Color: Yellow

Quantity: 500 Tons

Loading weight: 24 Tons

Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films.

The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.

toughness, strength and stretch properties. This grade is also be suitable for profile and sheet

extrusion

Packing: 1000kg bulk bag

Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5

Density 0.92 � 0.015

Measured on blown film of 25 �m and BUR of 2.5 at external testing facility.

rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).

Mesh filters: 150 on the laser filter and 120 on the piston filters."

Carbon fish meat grill oven process:
A. special high temperature resisitant material,high heat deformation,the overall structure uses professtional plate ;
B.all into oxygen at the bottom of the damper desigh,fast burning heat rapidly ,at teh top of the air valve design,effective control of heat loss;
C. origianl putty separation technology,completely avoiding using process because of the putty mixed soot and open flame,ensure clean,health and safety ;
D.equipment applied double high temperature heat insulation material,insulation system,insulation with security,external direct touch with no hidden dangers.
Operation method:
A. all burning charcoal in the burning charcoal ,open at the top the smooke at the bottom of the mouth and damper;
B.charcoal burning closed 10 minutes to the degree of smoke-free smoke at the top of the mouth,the heat;
C.after the temperature reaches the standard,in the baking objects to buy object ;
D.5-10minutes,bake fish until brown on both sides,are taken from the furnace, the plate feeding .

Equipment advantages :
A. unique design principle ,the use of charcoal smoke all gathered in the grilled fish inside furnace,through the top of the exhaust pipe directly emitted;
B.rapid heat,guarantee the production speed,let the charcoal furnace cavity fully burning rapied heating up,wind valve,and through the top to the bottom of the design of air supply outlet temperature in the furnace in a 300-350 degree,put the fish in the distribution on the stove on content cabinet ,only 8-10 minutes can be produced;
C. a novel view and admire a gender ,the design of the gear type appeared in front of customers,the grilled fish process more transparent,more ornamental ,fish and clients directly face to face "communication " ;
D this design flexibility ,the real achieve a multi-purpose furnace, can bakering chicken duck cattle and sheep for equipment use diversification more rich .
Fuel: dual-use carbon box ,burning charcoal or alcohol (vegetable oil ) ,pump design.

Installation and commissioning
Overall production : have direct admission requiements,no installation commissioning ,one pace reachs the designated position .
1.Solve the smoke problem charcoal grilled fish
we are familiar with most of the fish appeared in the night street food stalls ,a rectangular fish furnace ,a big fan, the air is filled with smoke smell fish .

Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by
resin casting. With its many rectangular and square spaces, it provides two-dimensional
homogeneous mechanical characteristics.
The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh
sizes and thickness
- Advantages
- Easy to assemble
- High Load-bearing capacity
- Easy to install and maintain / repair
- Durable in harshest environments
- Suitable for ventilation and natural lighting

Characteristic of products: composite by styrene-acrylic emulsion, the products has generous texture, firmly node, suitabale flexibility as well as acid alkali resistant and anti aging.


4*4, 100g/m2, shrink wrapping bag packing, then in carton.

JHG is professionally offering all various of high quality laminated glass:

1) PVB laminated glass

Colour includes clear/milk/bronze/grey/blue/green/black

PVB film thickness is 0.38/0.76/1.14mm or thicker

Both standard size and customized sizes available

2)Sentryglass Plus(SGP)laminated glass

SGP bring more safe,more transparent for construction ,the film includes 0.89/1.52/2.28mm and thicker

mainly used for glass floor,glass step,glass fin,curtain wall

Max size is 18000mm length

3)EVA laminated glass

It can be laminated with large range of inserts including PET film,polycarbonates,wood veneer,metal,paper ,stones,screeen mesh ,and so on ,it will bring mulrirusinous choice for inner decoration.

The surface material is galvanized steel plate, the middle layer is a polyurethane sandwich layer, B2 grade fireproof, and the back material is aluminum foil cloth.

The metal surface is treated with anti-rust and anti-corrosion, which is environmentally friendly, pollution-free, and tasteless. Light weight, convenient transportion and easy installation.

We supply both Native and Modified CORN STARCH,POTATO STARCH & TAPIOCA / CASSAVA STARCH such as Modified tapioca starch, Tapioca chips, Tapioca powder, Tapioca pearl.

MODIFIED TAPIOCA STARCH

Type : Acetylated
- Moisture: 13.5% max
- Starch: 85% min
- Ash: 0.2% max
- Whiteness: 90%min
- Viscosity: 800 - 900
- Slurry residue: 0.2% max
- Mesh: 100
- DS: 0.011 - 0.08
- pH: 4 - 7
Type : Oxidized
- Moisture: 13.5% max
- Starch: 85% min
- Ash: 0.5% max
- Whiteness: 90%min
- Slurry residue: 0.5% max
- Mesh: 100 -101
- pH: 4 -7
Type : Cationic
- Moisture: 14% max
- Starch: 85% min
- Ash: 0.2% max
- Whiteness: 90%min
- Slurry residue: 0.2% max
- Mesh: 100
- DS: 0.021 - 0.055
- pH: 4 -7
- N: 0.17 - 0.47% min

Packing: 25Kg multi walled paper bag.

500/850/1000kgs with jumbo bag

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles

Functional characteristic

the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc.

Application scope

the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc.

Specification 4D*51MMã??4D*32MM