Fiberglass continuous mat provides fast, thorough wet-out.Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. And can be pre-wet and moved for proper placement in wet lay-up open molding...
The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.
Properties:
Fiberglass no certain direction,good homogeneity.
No powder or emulsion,sink quickly and easy to operate.
High tensile strength,esay to operate.
Good impact strength of finished products.
Stitched fiberglass fabric (also called veilmat) is produced by stitching a polyester veil (tissue) to chopped strands. Polyester veil is around 45G/M2. Polyester veil has feature of anti-aging & water resistant, and also gives good surface to finished product. It is for pultrusion, especially for thin pultrusion product, closed mould process, or pipe winding. we export this materials to different countries like Exel composites in Australia, Iran, Ukraine, Italy, Malaysia and so on.
Stitch type: Tricot stitch on veil side, pillar stitch on CS. The chopped length is 100mm. Gauge is F5(space between needles 7mm).
Roll Length: Nominal linear 200meters +/-1m, the min width is from 150-3000mm.
FRP pultrusion profiles are made of continuous glass fiber roving, continuous glassfiber mats and surface mats under the pultrusion molding machine's traction,and then dipped in a mold to form profiles, bars and tubes with various cross-sectional shapes and sizes.
The tensile strength is higher than ordinary steel. The resin rich layer on the surface makes it have good corrosion and weather resistance, it is good choice to replace steel in corrosive and open-air environments.
Main Features
High Strength:Light Weight 1/4 of steel, 2/3 of aluminum.
Anti-Corrosion:Resistance to acid, alkali, organic dissolvent and other gas and liquidmixture.
ElectricInsulation: 10KV no voltage breakdown, no electro-magnetic behavior andelectric spark.
Anti-Skid:Different process mode on surface, concave, gritted, increase friction factor.
Anti-Aging:Have more than 20 years effective service life under normal outdoor workingcondition.
Anti-Fatigue:Moderate flexibility reduces the workers' pressure on legs and waist
EasyMaintenance: Have alternative and bright colors, non-fading, easy to clean.
Application
Outdooractivities: tent pole, arrow shaft, FRP I-shape beam, fishing rod, golf shaft,sail batten, skate boards, paddle shafts, slide guides;
Tool:curtain rod, fence post, rail, handrail, frame for cases and bags, flag pole,oil sucker rods, bolts, stair, ladder, greenhouse structures,scaffold,portable work platforms, cooling tower, window/door frame, sign post, bridgestructure, bus bar supports, tool handles, bike flags,flag poles, floorgratings, shoe soles;
Vehicle:motor top sticks, u-shaped motor stator wedges, service truck booms, snowmobiletrack stiffeners, high-end automobile components,bicycle frames, glider,microcar;
Pipe: gutters, firewater/ cooling water /gas /drinkingwater/ waste water pipe;
Building: roofing laminate, door surrounds, windowcanopies and dormers, chimneys, coping systems, insulators, cable conductor,cable tray, transformer air duct spacer sticks, cable support trays, etc.
CYC Fiberglass Direct Roving (ECY150D) for FRP Pultrusion
CYC Fiberglass Roving for FRP Pultrusion is finished with high performance silane sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resin matrixes. It is designed for weaving, filament winding, pultrusion, extrusion and hand lay-up processes. The typical end-finished products are including various FRP/GRP pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and so on.
Glass Type: E-CR Glass
Filament Diameter: 13, 15, 17, 24, 31�¼m
Linear Density: 300, 600, 900, 1200, 2400, 4800, 9600tex
Product Features:
Good strand integrity and even tension
Fast and complete wet-out in resins.
Inner side unwinding smoothly & no fuzz
Excellent tensile strength and mechanical properties
Introduction
Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
734 300Gsm Fiberglass Continuous Mat For Pultrusion Suppliers
Short on time? Let 300Gsm Fiberglass Continuous Mat For Pultrusion sellers contact you.
Introduction
Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction
Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Electrical insulation FR4 G10 epoxy resin fiberglass rod is made from glass cloth fabric impregnated with epoxy resin, then heated into prepreg and rolling into the rod shape, finally put into the different diameters molds, under high temperature and pressure to cure into the rigid laminated rods. Usually for mechanical & electrical applications, with good moisture resistance.
Diameter 6-110mm
Length 1,000mm
Color green/natural
300g fiberglass mat/ chopped strand mat/ csm/ sheet/ felt
1.Introduction
E-glass chopped strand mat is made of randomly distributed chopped strands held tighter by a emulsion/ powder binder. It is compatible with unsaturated polyester, vinylit, epoxy resins. The roll width ranges from 50mm to 2080mm. Special requirements may be available upon request.
2.Usage
It is used for processing and manufacturing frp products with getting through hand lay up process, filament winding process and press molding. Typical products is including bathroom accessories, pipe, building material, automobile, furniture, vessel, cooling towers and other frp products
3.Packing
Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets.
4.Parameter
Density(g/m2Moisture content (%Loss on ignition (%Binder typeWidth (mm)
2250.22.1-6.3Powder/ emulsion1040 1270 2080
2500.22.1-6.3Powder/ emulsion1040 1270 2080
3000.22.1-6.3Powder/ emulsion1040 1270 2080
4500.22.1-6.3Powder/ emulsion1040 1270 2080
6000.22.1-6.3Powder/ emulsion1040 1270 2080
fiberglass needle mat is a good thermal and voice insulation material
A.Density toralence +15%-10%
B. Heat Resisting 700C degree.Softening temperature: 850 C
C.High tensile strength: 350kg/mm ,Modules of elasticity:7300kg/mm ,Elongation at 25 C:4.8%,Flexible: conforms to irregular surfaced
D.Corrosion Properties:does not absorb water,rot,mildew,deteriorate or decay.
E. Application:Applications Muffler and exhaust insulation ,Automotive catalytic converter, flooring and front dash insulation ,Removable pads,Ship turbines ,Marine, industrial, and process piping ,Power generating equipment,Industrial furnaces and ovens ,Filtration ,Gaskets for air conditioning
Fiberglass wool/ needle mat/ rock wool/ glass wool/ felt/ blankets/ sheet
1. Producing
Fiberglass wool is made from fiberglass strands chopped to cut in fixing length, and then after dealing with devillicate, fluffing, needling to make to end product. It is ceaselessly sewn by thousands of stitched.
2. Feature
Long time operating temperature: 650°c
Thermal coefficient: room temperature 0.035w/ m*k
Hygroscopicity: 5%
Density: 110-180kg/ m3
3.Usage
It is widely used for conductex, iron, non-ferrous metal, chemical, burning industry etc, especially industry filter material in domestic. It is used in car internal decorate, sound absorption, heat insulation, damping, antiflaming, geotextile and insulation materials.
4. Technical parameter
Itemthickness (mm)area weight(g/m)density (mm)roll length (mm)
Emn334501000-200040
Emn446001000-200040
Emn557501000-200030
Emn669001000-200030
Emn8812001000-200020
Emn101015001000-200020
Emn121218001000-200015
Emn151522501000-200015
Fiberglass stitched mat is made from chopped fiberglass strands or woven roving which is cut into a certain length and randomly dispersed , laid on a roving matrix then stitched together with organic fibers.
Fiberglass stitched mat is used in unsaturated polyester resin strenthen, primarily in pultrusion, rtm, filament winding and hand lay-up processed. Such as pultruded parts, pipes, storage tanks, wind generator blades and other frp products.
Product properties:
1. Even thickness, high wet tensile strength retention
2. Directional properties and strengths same to woven roving
3.Enough hollows on surface to make it good permeability
4. Flexibility to design variety weaving structures
5. Stable structure required to achieve maximum tensile strength properties.
Shrink film packing and sealing and then package them with carton.
We are the manufacturer and exporter specialized in e-glass chopped strand mat in china, the capacity is about 6500mt per year, the normally specifications are 300g/m2, 450g/m2, 600g/m2 and the width is 1000mm, 1040mm, 1250mm, 1270mm, 2540mm ect, powder or emulsion bind! quality products, competitive price and fast shipping, we sincerely wish we can have the chance to cooperate in near futurer.
With the characteristics of non-directional and even distribution, high mechanical kinetics.
With fine plating and fitting for complex shapes of moulders.
Well-soaked with resin, cutting freely, working simply.
With high strength of absorbing resin, smooth appearance.
Specification
Package
First sealed with pvc film, then packed in the cardboard box.
Standard weight: 250g/¼o, 300 g/¼o, 380 g/¼o, net weight 30kg per box..
Standard weight: 450 g/¼o, 600 g/¼o, net weight 35kg per box.
Description: E glass Needle Mat is made by 100% short-cut E glass fiber 6-13um uniform machincally non woven needled without any organic binders. The E glass needle felt can be desized finish to smoke free mat, aluminum foil laminated. aluminum foil fiberglass fabric laminated.Ã?Â
Features: high temperature, chemical, and abrasion resistance, fire retardant
Application: soundproof, heat resistant, heat protection, thermal insulation on pipes, insulator for high temperatures, or other industrial areas.
UNIT: Kilogram
MOQ: 100 KGS
Weight: 160gsm
Width: 1m,1.2m,1.5m or customized
Yarn Type: E-glass
Standing temperature: up to 550 degree centigrade
Roll length: 50 meter or customized
Color: white
Weave Typeï¼?conventional
Alkali content: Alkali free
Processing service: cutting
Material: fiberglass
Thickness: 20mm or customized
Size: can be customized
Supply ability: 200000 Kilogram/Kilograms per Month
Packaging: Rolls packed In cartons loaded on pallets or according to customers' requirements.
Lead time: 7-30 days
Technology: nonwoven, laminating and needle-punched
Knitted mat is binderless characteristic, provides fast, thorough wet-out.
Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical.
Binderless chopped E-Glass, stitched at 7 gauge
The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates.
Products Property:
No any Binder, good compatible with Multi-Resin
Optimal mechanical performance
Easy workability and low cost
Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm
Standard Roll weight: 45/48/60kg
734 300Gsm Fiberglass Continuous Mat For Pultrusion Suppliers
Short on time? Let 300Gsm Fiberglass Continuous Mat For Pultrusion sellers contact you.
