2020 Alma Lasers Opus Plasma RF Fractional Skin Resurfacing. Includes: Opus Plasma Hand piece with Carrying Case, (8) Glide Tips, Foot switch, Power Cord, Key, Planning Guide & Teaching Tool, Operator Manual and 180 Day Warranty.
2020 Alma Lasers Opus Plasma Laser RF
2020 Alma Lasers Opus Plasma laser RF. The first-of-its-kind fractional plasma technology. Opus Plasma represents a new chapter for energy-based devices, addressing global or localized textural and skin quality concerns often corrected with conventional fractional resurfacing lasers in the past.
Operating at a high frequency of over 40MHz, the metal pins on the Opus Plasma tips are super-charged with high-voltage.
When in close proximity of the skin, the charged pins react to atmospheric pressure in the air, creating plasma that in turn, creates the micro thermal zones of fractional injuries.
Our Opus treatment delivers radio frequency energy at multiple levels to customize a treatment for your specific skincare concerns, using a range of settings to safely and effectively resurface the skin.
Able to treat face, neck, decollete, hands, stomachs, etc.
DOES IT HURT/WHAT IS THE DOWNTIME
We will apply a numbing cream before the treatment to make you as comfortable as possible, but you may still feel mild heat and pressure during the treatment.
We also offer and highly recommend a prescription numbing cream.
After a consultation, our Nurse will write you a prescription that we call in to Wellspring. This numbing cream is around $40 and allows us to turn up the machine resulting in a much better treatment.
Most people tolerate the treatment well.
You may experience some redness, but you can go back to your usual routine immediately after the treatment.
You will appear to have a sunburn look.
Your specialists will talk to you about aftercare at your consultation.
HOW MANY TREATMENTS WILL I NEED
We are getting incredible results as soon as the first treatment, however for maximum results we are recommending 3-4 treatments.
The results of Opus Plasma Spark are permanent.
Natural aging will still occur, so to maintain results you can have a maintenance treatment as often as every 6 months.
Fine Lines and wrinkles.
Skin laxity.
Uneven tone.
Unwanted pigmentation.
Stretch marks.
Acne scars.
Alma Inc announces the North American release of Opus, a new modern aesthetic platform featuring the companyâ??s proprietary high-frequency uni polar radio-frequency technology, Opus Plasma.
Reportedly the first-of-its-kind fractional plasma technology, Opus Plasma is engineered to address global or localized textural and skin quality concerns often corrected with conventional fractional resurfacing lasers in the past.
It is reportedly the first fractional plasma technology to enter the fractional resurfacing category, according to the company in a news release.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.
- Bamboo Tube - 100% Eco - Friendly with environment.
- Lenght: 20 cm (8 inches).
- Width: 5-7 mm or 8-10 mm.
- Feature: 100% natural, eco - friendly, no preservatives, no bleaching, bamboo straw can be reused many times.
- Save cost (1 bamboo straw can replace 30 - 100 plastic straws).
- Easy to disintegrate, does not affect the environment.
- Brushes/Laser printing/Cover bags: available.
- Packaging: 500 pcs/carton (20*22*24 cm).
12998 2020 Alma Lasers Opus Plasma Laser Rf Suppliers
Short on time? Let 2020 Alma Lasers Opus Plasma Laser Rf sellers contact you.
Consisting of two stacking steaming compartments and a lid, the tiered basket works its magic placed above simmering water in a wok, skillet or saucepan. This beautifully constructed small-scale steamer cooks just the right amount of veggies and fish or chicken for a meal for one and stores compactly.
Material: Bamboo
Shape: Round
Color: Natural bamboo color
Design: Bamboo steamer set
Size: Diameter 15cm, Height 8cm.
Feature: non-toxic, non-irritation, flexible, can be mass-produced, lightweight.
Usage: kitchenware, tableware, cooking tools, restaurant, household items etc
Logo: Customer printing logo or laser logo, engraving logo is available.
Bamboo cups are made of 100% natural, biodegradable bamboo. Bamboo cups do not use chemicals, safe for users. Light bamboo cup, easy to carry, don't worry about breaking. Bamboo cups are treated to remove carbon and sugar by boiling in salt water & drying, so it completely destroys termite larvae. Product is also a great tool to educate & remind children about a "green - clean" lifestyle, respecting nature, and protecting the environment. Sponge made from bamboo also has feng shui / spiritual meaning in the life of Vietnamese people when bamboo is considered to bring health, love, fortune, prosperity and luck to the owner. Easily personalize products by laser engraving logos, images, slogans...
ECO-FRIENDLY COCONUT SHELL BOW
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep in a cool dry place before storing in the refrigerator.
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for a long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven, or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep it in a cool dry place before storing it in the refrigerator.
Alma Laser's Opus Plasma is the first fractional technology to enter the market- not to be confused with strictly plasma devices. The combination of RF with 'micro plasma" energy allows us to treat skin texture and quality concerns in less time and with less patient downtime compared with other skin resurfacing solutions.
Alma Opus Plasma Radio Frequency Fractional Skin Resurfacing â?? With Viro-Vac Smoke Evacuator, Ultrasonic Cleaner For Tips & Includes Consumable & Service Support.
Featuring Almaâ??s proprietary high frequency, unipolar technology, the Alma Opus systemâ??s Opus Plasma handpiece is the first-of-its-kind Fractional Plasma technology to enter the skin resurfacing market. This novel solution addresses superficial to complex textural and skin-quality concerns that are traditionally corrected with conventional fractional resurfacing lasers or full-field ablative resurfacing lasers, but with less downtime and a higher safety profile.
First Fractional Plasma technology or skin resurfacing.
Ablative results.
Versatile treatments.
Immediate results.
Minimum downtime.
Operating at a high frequency of over 40MHz, the metal pins on the Opus Plasma tips are super-charged with high voltage. When in close proximity of the skin, the charged pins react to atmospheric pressure in the air, creating plasma that in turn, creates the microthermal zones of fractional injuries.
Alma Lasers Opus Plasma laser RF Fractional Skin Resurfacing. Includes: Opus Plasma Hand piece with Carrying Case, (8) Glide Tips, Foot switch, Power Cord, Key.
rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5
Density 0.92 �± 0.015
Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters.
Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet
extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5
Density 0.92 � 0.015
Measured on blown film of 25 �m and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters."
Essential details
Type:
Copy Paper
Weight:
80G
Size:
A4
Color:
White
Model Number:
Brilliant Laser Copy A4 Copy Paper
Place of Origin:
Austria
Paper Size:
A4
Packaging & delivery
Packaging Details
As customer requirement.
In Box
Lead time:
Quantity(pieces) 1 - 10000 >10000
Lead time (days) 22 To be negotiated
Product Description
Brilliant Laser Copy A4 paper 80gsm
Specifications:
Sheet Size:210mm x 297mm, International Size A4
Quality: Imported 100% Virgin Wood Pulp
Whiteness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
Size:
International standard
A4: 210 x 297mm
A3: 420x 297mm
8.5 x 11-inch (216 x 279mm)
8.5 x 14-inch (216 x 330mm)
Key Performance:
No jam in photocopy machine
No double feed
Stay flat after copying
Leave no dust in the copy-machine
Nice appearance-white and clean
Nice touch-smooth and bulky
No see through-print both sides
Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines
1. No jam in photocopy machine
2. No double feed
3. Stay flat after copying
4. Leave no dust in the copy-machine
5. Nice appearance-white and clean
6. Nice touch-smooth and bulky
7. No see through-print both sides
8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
1. No jam in photocopy machine
2. No double feed
3. Stay flat after copying
4. Leave no dust in the copy-machine
5. Nice appearance-white and clean
6. Nice touch-smooth and bulky
7. No see through-print both sides
8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines
Gramage: 80gsm, 75gsm, 70gsm
Quality: Imported 100% Natural Wood Pulp
Brightness = 102-104%,Natural White
Capability: High Speed Copying100ppm, Laser
Capable,Inkjet Capable, Fax Capable.
Thickness: 103-110 um
Surface roughness TS ml/min: 75-175
Surface roughness BS ml/min: 100-200
Bending stiffness MD: >110 Mn
Bending stiffness CD: >50 Mn
CIE whiteness: 148-152 or 152-165
Cobb Test: 27-33 g/m2 27-33
Two-sided usage gives the paper sheet high opacity.
Smooth paper surface makes sharp printing and copying.
Moist protected wrapper
PRODUCT DETAILS
A pair of black round-toe flats, has regular styling, slip-on closure
Synthetic upper with laser cuts
Cushioned footbed
Textured and patterned outsole
Material & Care : Synthetic
Wipe with a clean, dry cloth to remove dust
Specifications
Type : Ballerinas
Toe Shape : Round Toe
Fastening and Back Detail : Slip-On
Pattern : Solid
Occasion : Casual
Ornamentation : Laser Cuts
Ankle Height : Regular
Sole Material : Rubber
PRODUCT DETAILS
A pair of gunmetal-toned round-toe flats, has regular styling, slip-on detail
Synthetic upper with laser cuts and bow detail
Cushioned footbed
Textured and patterned outsole
Material & Care : Synthetic
Wipe with a clean, dry cloth to remove dust
Specifications
Type ; Ballerinas
Toe Shape : Round Toe
Fastening and Back Detail : Slip-On
Pattern : Solid
Occasion : Casual
Ornamentation : Laser Cuts
Ankle Height : Regular
Sole Material : Rubber
