This product is a vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000â??. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition. It is suitable for sample melting and heat treatment, phase diagram research. The equipment adopts high-quality high-frequency induction power supply and supports customized maximum 60KW high-frequency induction power supply. The equipment is equipped with a high-vacuum molecular pump set, which can effectively improve the vacuum degree of the substrate and thus improve the quality of the melting. The equipment is also equipped with a lifting platform and a flip handle to facilitate the operator to carry out the casting and sampling operations after melting.
The equipment is comprehensive in function, fast in melting, easy to use, energy-saving and environmentally friendly, and is very suitable for laboratory research on metal samples.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
As the most experienced Vacuum Induction Melting Furnace manufacturer in China, ShinTek Vacuum Induction Melting Furnace can be used for a wide of industries, can melting and pouring Ni-based alloy, special steel, precision alloy, NdFeB, Dysprosium metal, activated metal, super alloy, hydrogen storage material, magnetic material and so on…
Vacuum Induction Melting Furnace Specifications:
Model STVIM-10 STVIM-25 STVIM-50 STVIM-100 STVIM-200 STVIM-500 STVIM-1000 STVIM-1500
Working zone size 5*3*2 4.8*4*2.5 9.8*5*3.2 9.8*5.5*5.0 11*8.7*4.6 12.5*8*6 16*12*7.6 17*14*8.5
Load (KG) 10 25 50 100 200 500 1000 1500
Power 40KW 50/100KW 100KW 160KW 200/250KW 500KW 500KW 1000KW
Voltage 300V 175V 375V 375V 375V 700V 700V 700V
Frequency 4000Hz 2500Hz 2500Hz 2500Hz 1600Hz 1000Hz 500Hz 500Hz
Max. temperature 1600?
Temperature uniformity +/-5?
Ultimate vacuum level (Cold) 6.7*10-3Pa
Leakage rate =4Pa/h
Remark: The Vacuum Induction Melting Furnace can be customized for your specific project, and also can be equipped with casting furnace for your melting and casting process.
Vacuum Induction Melting Furnace features:
(1) Vacuum Induction Melting Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Induction Melting Furnace – Suitable for most of metallurgy industries, can be customized for users;
(3) Vacuum Induction Melting Furnace – Two heating system are available for choose, either thyristor frequency converter or IGBT power system.
(4) Vacuum Induction Melting Furnace – Two feeding method for choose: Manual or Semi-continueous;
(5) Vacuum Induction Melting Furnace – Friendly control system.
Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.
This product is a small vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000â??. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition. It is suitable for a small amount of sample melting and heat treatment, phase diagram research. The equipment is equipped with a high-vacuum molecular pump set, which can effectively improve the vacuum degree of the substrate and thus improve the quality of the melting. The equipment is also equipped with a lifting platform and a flip handle to facilitate the operator to carry out the casting and sampling operations after melting.
The equipment is comprehensive in function, fast in melting, easy to use, energy-saving and environmentally friendly, and is very suitable for laboratory research on small-dose metal samples.
Please contact us by email for details: cysi@cysi.wang
Juicer, mixer grinder, pressure cooker, electric iron, toaster, frying pan, water purifier, water dispenser, mixer/blender, dry iron, kettle, gas stove , non stick cookware, water heater, air cooler, water purifier, electric chimney system ceiling fan others, kitchen appliances, range hood.
Potassium Sulphate also is known as Sulphate of Potash, is 100% water soluble source of Potassium (K) and Sulphur (S), It can be used in the greenhouse, open field for vegetables, cereals, oilseeds, lawn, turf, and nurseries
These are ideal for downstream users who wish to re-melt this residual form of aluminium in their own furnaces, and then cast it to produce a variety of end products. We supply primary and secondary Ingots and Billets from Middle East, Asia and Far East.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Gold Induction Melting Furnace
This gold melting machine is designed for 2-10kg, which is suitable for melting precious metal such as gold, silver, copper, zinc, etc. With speedy melting time could be realized within 1-3 minutes. Based on the latest and most advanced IGBT induction technology, this small Gold Melting Kit can saves 15-30% energy than KGPS, 100% full load, with low power consumption. The power supply varies from 8kw-15kw for this series furnace.
Power on open water faucet put ceramic crucible in the machineput metal in the cruciblepress heating switchpress stop switchtongs the crucible and pour the metal liquid.
4 kg gold melting furnace Attention:
1.Can't be water-break during using the machine. If happens by accident, it needs to pick up the crucible at once, or the heating coil will be damaged.
2. Don't press the heating switch without crucible.
3. Press stop switch first, then pouring the liquid after the metal melted.
4. If the work is finished everyday, please take away the crucible then shut off power.
5. When water flow indicator light is shut off, it stands for out of water or low water pressure. And now the machine will start the function of protection, the gold melting machine will stop heating.
Application of Medium Frequency Induction Copper Melting Furnace:
1.Non-ferrous and ferrous metals melting;
2.Precious metal melting, like gold, sliver, platinum;
3.Semiconductor material melting;
4.Metal alloy melting, like aluminum alloy, zinc alloy, copper alloy,etc.
Main characteristics:
1.Light weight, small size.
2.Different shape and size of induction coil can be changed easily to heat different parts.
3.Mul-tidisplay functions, with displays of over current, over voltage, water failure, phase failure, etc.
4.Simple to operate, a few minutes is enough to learn it.
Foundry coke is a high-quality grade of coke, also known as hard coal. Coke is majorly used for efficient cupolas for melting iron and other metals such as lead, copper, zinc, tin, etc. in cupola furnace foundries.
This furnace adopts electromagnetic induction smelting, the structure is very simple, does not need to do the foundation. Cooling method can be water cooling or air cooling. The furnace body is tilted by a reducer, which can be tilted manually when power is cut off. The noise meets the environmental protection standard and is less than 60 decibels.
Minimum Order Quantity: 1 Unit
Melting Material: Silver
Type Of Furnace: Induction
Voltage : 220-380 V
Melting Time : 30-35 mins
Power: 10 KW to 100 KW
Capacity: Available in 5 Kg,10 kg,15 kg,60 kg
Warranty: 1 Year
Duty Cycle : 100%
Frequency : 50 - 60 Hz
Some other important and useful qualities include:
Power conversion efficiency
Fast on/off switch time
Less current and voltage stress on power devices
A constant output of power despite input power fluctuations
Reliable, easy to maintain and service
Compact in size easy to install and simple to operate
Product Details:
Melting Time: 15-20 minutes
Voltage: 220-380 V
Melting Material: Copper
Power: 10 KW to 5000 KW
Brand: Foster
Surface Treatment: Color Coated
Phase : Three Phase
Body Material: Mild Steel
Warranty: 1 Year
Duty Cycle: 100%
Frequency: 50 - 60 Hz
Capacity: Available in 5 Kg,10 kg,15 kg,200 kg,10 ton
Here are some of the reasons why induction furnaces ideal for melting of copper:
Power Regimes:
Induction melting furnaces tend to be more flexible when it comes to alloying. These furnaces can be easily shut off any time the plant or factory closes, and relining is fairly quick and simple. They also tend to be more economical in terms of energy consumption, and they usually have a longer refractory lifetime. In the Induction furnace melting rate is very fast and large quantity of the metal can melt very quickly.
Reliability:
When it comes to melting copper, a copper furnace based on induction is far more reliable than most others. Due to latest IGBT technology and standard built up the maintenance of furnace is almost nil, manufacturers can get the most out of this type of furnace without the need for any repairs.
Cleanliness:
It''s well known that induction furnaces emit far less pollutants than other types of furnaces. Not only does this mean that you are protecting your employees from breathing in harmful substances, but having a clean atmosphere will also prevent any additional oxidation of the copper.
Energy Efficiency:
A recent study noted that today''s modern induction furnaces can achieve higher electrical efficiency levels. That means less of a negative impact on the environment, and it means you won''t be wasting more on energy costs.
Melting Material: Brass
Voltage: 220-380 V
Melting Time : 30-60 mins
Brand: Foster
Rated temperature: 1200 degree Celsius
Power: 10 KW to 5000 KW
Capacity: Available in 5 Kg,10 kg,15 kg,200 kg,10 ton
Warranty: 1 Year
Frequency: 50 - 60 Hz
Features:
Easy to operate
Long service life
Low maintenance
Other Details:
High efficiency
Maximum melt rate
Top quality and long life
Innovative design
Optimal productivity
