Calcium Caseinate, CAS no.9005-43-0, is a protein produced from casein in skim and sometimes 1% milk, and functions as a calcium and protein supplement. Calcium Caseinate supplies the necessary amino acids for human bodies and reinforces the absorption of calcium inside human bodies. It uses as thickening, emulsification and formability properties, and used in nutrition beverages, cheese, bread and baked goods. It is a protein that can also be used as dietary supplement for bodybuilders and other athletes.
As an experienced Calcium Caseinate manufacturer and supplier, we has been supplying and exporting Calcium Caseinate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Calcium Caseinate Specification
APPEARANCE CREAM WHITE POWDER
PROTEIN (DRY BASIS) 90.00%
MOISTURE 5.5%
PH 6.3- 7.0
ASH 6.00%
FAT 1.5%
TOTAL PLATE COUNT 20000G
Calcium 1.00
PATHOGENIC BACTERIA NEGATIVE
YEAST/MOULD 50/G MAX
THF is an important organic synthetic raw material and a solvent with excellent performance. It is especially suitable for dissolving PVC, polyvinylidene chloride and butyl aniline. It is widely used as a solvent for surface coatings, anticorrosive coatings, printing inks, tape and film coatings, and used in combination. As a reaction solvent, the thickness and brightness of the aluminum layer can be arbitrarily controlled when used in the aluminum electroplating solution. THF itself can be polycondensed (ring-opening and repolymerization initiated by cations) into polytetramethylene ether glycol (PTMEG), also known as tetrahydrofuran homopolyether. PTMEG and toluene diisocyanate (TDI) are made into special rubbers with abrasion resistance, oil resistance, good low temperature performance and high strength; with dimethyl terephthalate and 1,4-butanediol to make block polyether polyester elastic Material.
Mace
Botanical: Myristica fragrans
Family: N.O. Myristicaceae
Hindi Name: Mace - Javitri
General Description: Nutmeg, spice consisting of the seed of the Myristica fragrans, a tropical, dioecious evergreen tree native to the Moluccas or Spice Islands of Indonesia.
Geographical Sources
The nutmeg tree, Myristica fragrans, is indigenous to the Moluccas in Indonesia but has been successfully grown in other Asian countries and in the Caribbean, namely Grenada. Banda Islands, Malayan Archipelago, Molucca Islands, and cultivated in Sumatra, French Guiana
Composition -> Nutmeg and mace contain 7 to 14 percent essential oil, the principal components of which are pinene, camphene, and dipentene. Nutmeg on expression yields about 24 to 30 percent fixed oil called nutmeg butter, or oil of mace. Dried kernel of the seed.
Varieties -> Whole nutmegs are grouped under three broad quality classifications:
1. Sound: nutmegs which are mainly used for grinding and to a lesser extent for oleoresin extraction. High quality or sound whole nutmegs are traded in grades which refer to their size in numbers of nutmegs per pound: 80s, 110s and 130s (110 to 287 nuts per kg), or 'ABCD' which is an assortment of various sizes.
2. Substandard: nutmegs which are used for grinding, oleoresin extraction and essential oil distillation. Substandard nutmegs are traded as 'sound, shrivelled' which in general have a higher volatile oil content than mature sound nutmegs and are used for grinding, oleoresin extraction and oil distillation; and 'BWP' (broken, wormy and punky) which are mainly used for grinding as volatile oil content generally does not exceed 8%.
3. Distilling: poor quality nutmegs used for essential oil distillation.Distilling grades of nutmegs are of poorer quality: 'BIA' or 'ETEZ' with a volatile oil content of 8% to 10%; and 'BSL' or 'AZWI' which has less shell material and a volatile oil content of 12% to 13%.
Method of Processing -> When fully mature it splits in two, exposing a crimson-coloured aril, the mace, surrounding a single shiny, brown seed, the nutmeg. The pulp of the fruit may be eaten locally. After collection, the aril-enveloped nutmegs are conveyed to curing areas where the mace is removed, flattened out, and dried. The nutmegs are dried gradually in the sun and turned twice daily over a period of six to eight weeks. During this time the nutmeg shrinks away from its hard seed coat until the kernels rattle in their shells when shaken. The shell is then broken with a wooden truncheon and the nutmegs are picked out. Dried nutmegs are grayish-brown ovals with furrowed surfaces. Large ones may be about 1.2 inches long and 0.8 inch in diameter.
Taste and Aroma: Nutmeg has a characteristic, pleasant fragrance and slightly warm taste
Product Nature
Chemical name: Potassium Amyl Xanthate (PAX)
Equivalent to : Z-6, AERO 350 xanthate
Molecular Formula: C5H11OCSSK
Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form
Testing method: Lead acetate titration
CAS Number: 2720-73-2
EINECS No.: 213-180-2
Use
A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of CU/PB/NE AND PYRITE, Especially For The Floatation Of The Gold In Gold And Copper Mine.it Could Make Good Result In Copper And Lead Oxidized Ore.ofeen Used In Rough Selecting And Scavenging.
Specifications
Chemical components Specification 1 Specification 2
Purity 85% Min 90% Min
Moisture & volatiles 10% Max 4% Max
Free alkali 0.5% Max 0.2% Max
Packing and Storage
120KG IRON DRUM,134 DRUMS PER 20'FCL,16.08MT; (OR 110-180KG IRON DRUM)
850KG Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner BAG) 25-50KG WOVEN BAG
Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular
Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.
Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.
Specifications
Item Name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 ¤0.5 % 0.005 % 0.004%
PH value .0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%
Packing 25kg or 50kg or 1000kg in plastic lined woven bag
Usage and Dosage:
1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement.
2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation.
3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color.
4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies.
Storage:
Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems.
Precaution: Flammability Non flammable. No fire or explosion hazard exists.
Packing: Net weight 25kgs, 50kgs per each plastic woven bag
Technical Specification
Appearance: Light green crystalline powder
Fe 19.7%min
Pb 20 ppm max
As2 ppm max
Cd 5 ppm max
Size Crystalline Powder
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
English name:Â Calcium Nitrite
Molecular formula:Â Ca(NO2)2
Molecular weight:Â 132
CAS NO. 13780-06-8
HS CODE:Â 28341000
UN NO.: 2627 5.1 type oxidizing agent
Properties:Â White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution.
Specifications:
Item Superior grade First grade Second grade
Calcium Nitrite[Ca(NO2)2Â as dry basis]% 94 92 90
Calcium Nitrate[Ca(NO3)2Â as dry basis]% <4 <5 <6
Calcium hydroxide[Ca(OH)2Â as dry basis]% <1.0 <1.0 <1.0
Moisture % <1.0 <1.0 <1.0
Water insoluble matter % <0.6 <1.0 <1.0
Uses:
1. Antifreezing agent.
2. Inhibitor of steel in concrete.
3. Can prepare compound early strength agent.
Packing 25/50/1000KG woven bag lined with plastic or according to customer's requirements.
Soy Lecithin, E322, CAS no.8002-43-5, a mixture of phospholipids in oil, manufactured through water degumming the extracted oil of soybean. Non-GMO Soy Lecithin appears as a yellow to brown viscous liquid. Soy Lecithin is used as an emulsifier, thickener, stabilizer, mild preservative, and moisturizer. As an emulsifier, it prevents separation from occurring in products such as peanut butter, chocolate, ice cream, and margarine. It can also be used in the baking of bread to improve the texture and size.
As an experienced Soy Lecithin manufacturer and supplier, we has been supplying and exporting Soy Lecithin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Soy Lecithin Specification
ITEMS STANDARD
Appearance Light yellow to brown color, transparent or half-transparent, viscous liquid
Acetone Insoluble % 60
Acid Value mg/KOH/g 30
Moisture % 1.0
Peroxide Value( meg/kg) 10
Color Gardner Scale) 14
Hexane Insoluble % 0.5
Salmonella Absent in 25g
Standard Plate Count < 6700/G
Staphylococcus Aureus < 100/1g
Moulds & Yeasts <300/G
Viscosity(cp,25) 10000
HLB Value 3-4
Betaine, other name, trimethylglycine, CAS No.107-43-7, available as white Crystals or crystalline powder. Betaine is widely used as nutritional supplements. Betaine is available in Betaine Anhydrous and Betaine Monohydrate form. As Betaine Manufacturers, Suppliers and Wholesalers in China, we supply food and feed grade Betaine.
As an experienced Betaine manufacturer and supplier, we has been supplying and exporting Betaine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Betaine anhydrous, rimethylglycine, CAS No.107-43-7, HS code292390, one of the betaine series and also known as betaine base, is a kind of nutritional additive of efficiency, high-quality and economic advantage and is widely used for animal and poultry breeding and aquaculture as well. Used in applications as diverse as sports nutrition and cosmetics.
As an experienced Betaine anhydrous manufacturer and supplier, we has been supplying and exporting Betaine anhydrous for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Betaine Anhydrous Specification
Specifications Standard
Betaine anhydrous content (dry basis,%) 99 98.0 98.5 6.0
Loss on drying % 1.0% 1.5% 2.0%
anticaking calcium stearate % 1.5% 1.5%
Ignite residue % 0.2% 1.2% 1.5%
chloride % 0.1% 0.5% 1.0%
Heavy metal (Pb) 10ppm 10ppm 10ppm
Arsenicâ?¤ 1ppm 2ppm 2ppm
18942 2 Heptanone (Cas:110 43 0) Suppliers
Short on time? Let 2 Heptanone (Cas:110 43 0) sellers contact you.
