Remote Control IR Repeater/ IR Extender with 1 Receiver & 2 Emitters ( for 2 AV Devices ) and USB 5V adaptor U102-P
This unit U102-P can be used to extend the IR signal up to 2 Devices.
Remote Control IR Repeater/ IR Extender can be used with weak IR Remote control signal from players such as IPTV. CD/VCD/DVD/ Blu-ray, Home System, Television, Setup box, recorder, CATV, Karaoke system, etc. It is also recommended for Players/ Equipments which are concealed in console or cabinet.
Operating at 34KHz ~ 60KHz, This IR Repeater is the smallest yet powerful IR repeater with high speed transmission without delay.
Series available as follows :
U Series powered by USB 5V and D series powered by DC12V
U101, U101A, D101 --- 1 Receiver 1 Emitter ( for 1 AV Equipments )
U102, U102A, D102 ---1 Receiver 2 Emitters ( for 2 AV Equipments )
U104, U104A, D104 ---1 Receiver 4 Emitters ( for 4 AV Equipments )
U101-P. U101A-P, U102-P, U102A-P, U104-P, U104-AP etc. – USB 5V Adaptor Included
U101, U101A, U102, U102A, U104, U104A etc. – USB Power Adaptor not included
PACKAGES :
1. USB Adaptor 5V 500mA
Our U series which is powered by USB adaptor ( Included ) can also be powered by connecting the USB cable to the USB port on your AV Equipment.
2. IR Emitter Cable ( 2 IR Emitter heads ) to DC3.5mm Male 1m
IR Emitter Cable is one which to be stuck the Emitters on the IR Point of your respective AV equipments and DC3.5mm is to connect with Item 3.
3. USB to IR Receiver Length 2m. IR Receiver to DC3.5mm 2m
USB is to be connected to USB adaptor or your AV device for power.
INSTALLATION :
1. Clean the surface of your AV equipments. Stick the IR Emitter on each the IR point of your AV Equipments. Connect the ends of two DC3.5mm cable.
2. Place the IR Receiver such a way that it is facing your remote control.
3. Connect the USB to USB Adaptor/ USB port of AV Equipment for power
4. Power up & all is ready to go.
TECHNICAL SPECIFICATION :
Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz
Emitting Frequency ( Broadband ) : 38 KHz & 56KHz
Receiving Distance : 8 meter
Emitting Distance 10-20 cm
Power Consumption < 30mA
Dimension for Receiver & Emitter : 31 (L) ×17 (W) ×13 (H) mm, 13 (L) ×8 (W) ×5. 5 (H) mm
Input AC 100-240V/ Output DC 5V : USB 5V 500mA
FREQUENTLY ASKED QUESTIONS :
1. How to locate the IR Point of the AV Equipment?
A. Set up as per the installation procedures without step one. With the help of an assistant controlling the AV equipment Remote Control, move the IR Emitter around on the window of AV equipment until signal sent is received.
2. Remote Control doesn't work after installation ?
A. Check the power status of your AV equipment
B. Check the connection of USB to AV Equipment/ Power adaptor
C. Ensure that remote control is facing the IR receiver ( Flashes red when a signal is sent )
D. Check the position of IR Emitter.
E. Place IR Receiver away from Plasma or CCFL screen as it may affect the remote control signal.
F. Contact your dealer if the situation does not improve after the above alteration.
* Use 2.4GHz ISM frequency band.
* Support 4 groups of channels. You can select these channels to avoid interference from signals of a wireless router, etc.
* Wireless transmission is suitable for one-floor or two-floors.
* The transmitter and the receiver are used in the same channel in a pair and can be used in the modes of point-to-multipoint or multipoint-to-multipoint.
* Compatible with DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other AV output devices.
* Superheterodyne 433MHz Wireless IR Remote Extender is fully compatible with remote control signals of DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other AV devices.
* The product is equipped with super strong IR signal transmitting function or used in conjunction with an IR signal extension wire.
* Images received by means of radio are vivid and stable, the color is flamboyant, and the sound is clear.
* Supports video transmission of PAL/NTSC system and stereo audio transmission.
* Fully hardware-designed. There is no need to install software. Plug and play. Simple and convenient.
* Dimensions: 10cm (L) ¡Á8.5cm (W) ¡Á3.0cm (H).
* 2.4GHz module is CE & FCC certificated. Wireless application is safe and reliable.
Transmitter Receiver
Frequency Band 2.4GHz Sensitivity -90dBm
A/V Input Port RCA A/V Output Ports RCA
Video Input Level 1Vp-p(PAL/NTSC) Video Output Level 1Vp-p(PAL/NTSC)
Audio Input Level 1Vp-p(Stereo) Audio Output Level 1Vp-p(Stereo)
433MHz Sensitivity -110dBm IR Transmitter Superheterodyne 433.92MHz
Carrier frequency 38KHz Carrier frequency 38KHz
IR Transmitting Range ¡Ý5m IR Receiving Range ¡Ý10m
Power Supply DC 5V-1000mA Power Supply DC 5V-1000mA
Application:* It transmit AV signals by means of radio waves and can be used for wireless sharing of AV signals of DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other AV devices of several TV sets.
* Wireless AV transmission solutions are suitable for large video meeting systems and multimedia class rooms.
* With an external CCD camera, it can realize real-time field image monitoring in applications such as security system.
* It can also be used in AV transmission applications where the AV cabling is difficult or expensive.
Remote control ir repeater/ ir extender with 1 receiver & 1 emitter ( for 1 av device ) & usb 5v adaptor u101-p
To amplify the ir signal of remote control for 1 av player such as iptv. Cd/vcd/dvd/ blu-ray, home system, television, setup box, recorder, catv, karaoke system, etc. It is also recommended for players/ equipments which are concealed in console or cabinet.
Remote Control IR Repeater/ IR Extender with 1 Receiver & 8 Emitters ( for 8 AV Devices & 1 Display ) with DC12V power BD108
IR REMOTE CONTROL REPEATER / EXTENDER BD108
This model BD108 is used for extending IR signals of 8 Electronics Devices
Remote Control IR Extender/ IR Repeater ( Transceiver ) is a product which amplifies the IR signal of your appliances. By connecting this repeater to your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
There are 3 main parts in this repeater namely Emitter, Receiver & Transceiver.
The emitter is to be pasted on the IR point of your appliances while the receiver is placed in a position of which it communicate signal with your remote control. The transceiver box process signal received from the Receiver and generate signals out to Emitters which in turn to your Players/ Appliances.
FEATURES
High Sensitivity - Real time transmission without any delay with its high sensitivity sensor.
CFL Friendly - This unit can be installed in an area with compact fluorescent lighting and work in most lighting environments
Remote Indication light on IR Receiver - Green being power connected while flashing red indicates the signal is being sent.
Broad bandwidth - With this feature, it is compatible with almost all the electronics appliances in the market with its wide frequency range
Size - Small & Solid design
Low Power - 12V DC, 30mA max
INSTALLATION
IR RECEIVER
( Note: Plasma Displays emit IR frequencies during use and may cause interference. It is advised to distance the IR Receiver from any Plasma TV. Ability to control multiple appliances at various locations up to 10m. )
Connect IR Receiver to any of the 3.5mm IR ports on the IR Transceiver box. If 2 or more IR receivers are connected, the distance between 2 IR Receivers should not be less than 6 m to avoid interference. ( Only 1 IR Receiver for this model BD108 )
(Note : Maximum of 6 IR Receivers can be connected to the 3 Ports of 3.5mm Jack ( on Transceiver ) by using 3.5mm Splitter cable 1 Male to 2 Female. Three 3.5mm Splitter cables connect to transceiver to obtain 6 ports of 3.5mm )
Remote Control from the room is achievable if the AV cable from TVs ( Room ) is connected to the Player/ Appliance ( Hall ). ( I.e Sharing a Player/ Appliances to watch in different rooms ) See Picture.
IR EMITTERS
Insert Emitter cable to any of the Emitter Input Ports on Transceiver box. ( Optional : Maximum of 24 emitters can be connected to the 6 Transceiver Emitter Input Ports, using 4 Emitters head per cable type ) ( 8 Emitters head for this model BD108 )
Stick the emitter near to the IR Point of Player/ Appliances. Only one emitter head is applicable on each Player/ Appliance
Operate the Remote Control faces the IR Receiver. Keep moving the IR Emitter on Player/ Appliance to achieve best signal transmission. Stick the Emitter to the point which produced the best signal. See Picture.
POWER SUPPLY ( 2 Ways of power supply )
BD Series - Direct power using DC 12V/500m OD 5.5mm ID 2.1mm adaptor ( Included)
BU Series - By connecting the IR Transceiver box to Player/ Appliance via USB cable. Using the power of Player/ Appliance to power up the Transceiver box OR connects the Transceiver to a USB DC 5V adaptor. ( Not included )
TECHNICAL SPECIFICATION
Receiving Frequency Range : 34 KHZ to 60KHZ
Emitting Frequency Range : 38 KHZ & 56KHZ
Receiving Distance : 8 Meter
Emitting Distance : 100-200mm
Power Consumption : 12VDC, 30mA max.
Dimension : IR Receiver 31 (L) × 17 (W) × 13 (H)mm IR Emitter 13 (L) × 8 (W) × 5.5 (H)mm
IR Transceiver Box 90 (L) × 55 (W) × 26 (H) mm
Cable Length : DC 12V Adaptor Cable 0.7m, IR Receiver 1.5m, IR Emitter 3m
Weight :
IR Receiver 30g
IR Emitter ( Dual heads ) 25g x 4
IR Transceiver Box 140g
12VDC Adaptor 80g
FREQUENTLY ASKED QUESTIONS & REMEDIES
1. HOW TO LOCATE THE IR POINT ON PLAYERS/ APPLIANCES ?
Move the emitter around the surface of player until a signal is received from the remote control. Once a signal is received, paste the emitter on the particular point on the player.
2. REMOTE MUL-FUNCTION AFTER INSTALLATION ?
Check the battery of the remote control；
Red light blinks on IR Receiver indicates that signal is being sent from Remote Control to IR Receiver and IR Receiver is in working condition.
Check the distance between the IR Receiver & Emitter.
Check if the emitter is pasted on the right position ( IR point of the player )
3. INSENSITIVITY OF IR RECEIVER ?
Check if the emitter is pasted on the right position ( IR point of the player )
Change to USB 5V adaptor for power supply
Move the IR Receiver away from the TV as there may be electrons interference from the TV.
4. WATER MARKS, POWER NOISE AND UNCLEAR PICTURE AFTER INSTALLATION ?
Noise originated from the connections of TVs, Players. Try cleaning with a dry cloth or with less alcohol. Reinstate power thereafter.
Network Cable – Please ensure that only quality full copper CAT5E is used so as to regulate better image quality even if the distance is far. Inferior quality of CAT5E will decrease the distance and AV of the display. Connection of the CAT5E head ( RJ45) also affects the quality of the image and current noise. Ensure that CAT5E is fully inserted to the Transmitter/ repeater.
5. AS LONG AS THE PLAYER/ APPLIANCE IS ON, ANY SUB-TV ( ROOMS ) CAN BE WATCH EVEN IF THE MAIN TV IS OFF .
Ability to use the Remote Control in the room to control the Player/ Appliance in the hall.
6. WHICH REMOTE CONTROL TO USE?
Use the Remote Control of the respective Players/ Appliances to manipulate the controls.
PACKAGES
1. IR Transceiver Box ( 1 Piece )
2. IR Receiver Cable ( 1 Piece with 1 Receiver on cable )
3 IR Emitter Cable ( 4 Pieces with 2 Emitters on each cable )
4. DC 12V Adaptor ( 1 Piece ) Type of Adaptor pin will be packed according to your requirement.
5. Instruction Manual
Use 2.4GHz ISM frequency band.
250 m transmission range without any holdback.
Supports video transmission of PAL/ NTSC system and stereo audio transmission, Pictures received are clear, flamboyant and stable
Machine dimensions: 10 & 161; 8.5 & 161; 3.0 cm
1100 2 4Ghz Wireless Av Sender With Ir Remote Extende Suppliers
Short on time? Let 2 4Ghz Wireless Av Sender With Ir Remote Extende sellers contact you.
Decentralized and sustainable water, wastewater, and reuse solutions. We offers scalable, cost-effective, and rapid-to-deploy systems for municipal, industrial, hospitality, and remote community applications.
Core Technologies & Solutions
1. Modular containerized wastewater treatment using:
MABR (Membrane Aerated Biofilm Reactor)
MBR and activated sludge
For populations of 50 to 3,000 (up to 250,000 GPD)
Energy-efficient, low-maintenance, compact
2. Wastewater treatment upgrades or greenfield plants using MABR:
Retrofit existing plants or build new
Improve effluent quality, increase capacity, reduce energy usage up to 30%
Small or zero footprint, fast installation
3. Pre-packaged extended aeration systems:
For flow rates from 200 to 2 million GPD
Simple operation and installation
Suitable for rural and small municipal systems
4. Shortcut nitrogen removal for high-strength wastewater:
Uses MABR
Reduces energy by 40% and TIN by over 90%
Water Treatment Solutions
1. We Containerized systems for:
Seawater (SW) Up to 1,500 m/day per unit
Brackish water (BW) Recovery rates up to 90%
Freshwater (FW) Up to 5,000 m/day
Pre-engineered, modular, compact, low-energy
Note: The prices provided are for reference only and may be subject to change.
Use 5.8GHz ISM frequency band.
* Support 8 groups of channels. You can select these channels to avoid interference from signals of a wireless router, etc.
* Wireless transmission is suitable for one-floor.
* The transmitter and the receiver are used in the same channel in a pair and can be used in the modes of point-to-multipoint or multipoint-to-multipoint.
* Compatible with DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other AV output devices.
* Superheterodyne 433MHz Wireless IR Remote Extender is fully compatible with remote control signals of DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other AV devices.
* The product is equipped with super strong IR signal transmitting function or used in conjunction with an IR signal extension wire.
* Images received by means of radio are vivid and stable, the color is flamboyant, and the sound is clear.
* Supports video transmission of PAL/NTSC system and stereo audio transmission.
* Fully hardware-designed. There is no need to install software. Plug and play. Simple and convenient.
* Dimensions: 10cm (L) ¡Á8.5cm (W) ¡Á3.0cm (H).
* 5.8GHz module is CE & FCC certificated. Wireless application is safe and reliable.
Transmitter Receiver
Frequency Band 5.8GHz Sensitivity -90dBm
A/V Input Port RCA A/V Output Ports RCA
Video Input Level 1Vp-p(PAL/NTSC) Video Output Level 1Vp-p(PAL/NTSC)
Audio Input Level 1Vp-p(Stereo) Audio Output Level 1Vp-p(Stereo)
433MHz Sensitivity -110dBm IR Transmitter Superheterodyne 433.92MHz
Carrier frequency 38KHz Carrier frequency 38KHz
IR Transmitting Range ¡Ý5m IR Receiving Range ¡Ý10m
Power Supply DC 5V-1000mA Power Supply DC 5V-1000mA
Application:* It transmit AV signals by means of radio waves and can be used for wireless sharing of AV signals of DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other AV devices of several TV sets.
* Wireless AV transmission solutions are suitable for large video meeting systems and multimedia class rooms.
* With an external CCD camera, it can realize real-time field image monitoring in applications such as security system.
* It can also be used in AV transmission applications where the AV cabling is difficult or expensive.
Features:
1.With 8 selectable channels (Dip Switch)
2.Transmit the crisp A/V signal with radio frequency
3.With 5.8GHz antennas embedded into housing
4.Remote control the A/V source with IR extender
5.Compatible with Camcorder or CMOS camera application
6.NTSC / PAL video format available.
Specifications:
ITEM501T501R
5.8GHz antennaDirectional flat antennaDirectional flat antenna
433MHz antennaExternal omni-directional antennaInternal Omni-directional antenna
Transmit power17dBm(Typical)-
Sensitivity--86dBm type
Frequency band5.725GHz~5.865GHz5.725GHz~5.865GHz
Channel Customer8 selectable channels8 selectable channels
Input formatAvailable in NTSC or PAL-
Output format-Available in NTSC or PAL
Video input level1 Vp-p@75Ω-
Audio input level1 Vp-p@600Ω-
Video output level-1 Vp-p@75Ω
Audio output level-1 Vp-p@600Ω
Input / output ConnectorMINI DIN jackMINI DIN jack
Operating conditionIndoor usage recommendIndoor usage recommend
Remote control frequency433.92MHz433.92MHz
IR carrier frequency32~38KHz32~38KHz
Power Consumption9Volt DC, 300mA(Typical)9Volt DC, 300mA(Typical)
Operating Temperature-10℃ ~ +60℃-10℃ ~ +60℃.
Use 2.4GHz ISM frequency band.
150 m transmission range without any holdback.
Support DVD, DVR, IPTV, CCTV Camera, Satellite receiver, Digital STB and other AV output devices.
Supports video transmission of PAL/ NTSC system and stereo audio transmission, Pictures received are clear, flamboyant and stable.
The ASL Skin and Hair Mobile Innovation Analysis System is a mobile innovation analysis system by Aram Huvis, designed to assess skin and hair conditions. This portable system combines advanced technology for real-time analysis, making it a convenient solution for personalized skincare and hair care diagnostics. The device aims to provide accurate, on-the-go assessments for both professional and personal use.
Hair Solutionist ASL-202 Measures:
1.Hair Loss Status
2. Scalp Status
3. Hair Density
4. Keratin of Scalp
5. Sensitivity
6. Hair Thickness
7. Hair Pore Status
Video MJPEG Streaming Solution:
- VGA (640 x 480) | 30 FPS Max
- 2 M (1600 x 1200) | 15 FPS Max
Automatic Remote Control Analysis:
- Start | Mode Change Image Capture l Analysis l Result
Multi OS Support:
Android | Mac OS | iOS | Windows
SPECIFICATION:
- Wi-Fi Type : Wireless LAN IEEE 802.11 b/g/n
- OS Support : Android, iOS, Windows, Mac OS
- Image Sensor: 1/4 inch Color CMOS UXGA (2 Mega Pixel)
- Sensor Pixel : Effective pixel : 1,624 X 1,212 Pixel
- Image Capture Size : Wi-Fi Video Streaming VGA (640 X 480)
- Image Frame Rate : VGA (640 X 480) - 30 Frame Max
2 M (1,600 X 1,200) - 15 Frame Max
- LED : Dip LED X8
- Camera Button Function : Start, Mode Change, Image Capture, Analysis, Result
- High Magnification Lens :
1. X 60 - NL
2. X 60 - PL
3. X 200 - NL (Crop)
4. X 200 - PL (Crop)
- Focusing : Fixed Type
- Battery : Type: Li-ION / Typical Capacity: 1,150 mAh
- Normal Voltage: 3.7 V
- DC IN Adaptor: 5V DC / 2A
- Out Dimension: 69(W) X 100(H) X 22(D )mm (API-100)
- Weight: About 100 g (with Battery)
- Cradle : Stand
The ASL Skin and Hair Mobile Innovation Analysis System is a mobile innovation analysis system by Aram Huvis, designed to assess skin and hair conditions. This portable system combines advanced technology for real-time analysis, making it a convenient solution for personalized skincare and hair care diagnostics. The device aims to provide accurate, on-the-go assessments for both professional and personal use.
Hair Solutionist ASL-202 Measures:
1.Hair Loss Status
2. Scalp Status
3. Hair Density
4. Keratin of Scalp
5. Sensitivity
6. Hair Thickness
7. Hair Pore Status
Video MJPEG Streaming Solution:
- VGA (640 x 480) | 30 FPS Max
- 2 M (1600 x 1200) | 15 FPS Max
Automatic Remote Control Analysis:
- Start | Mode Change Image Capture l Analysis l Result
Multi OS Support:
Android | Mac OS | iOS | Windows
SPECIFICATION:
- Wi-Fi Type : Wireless LAN IEEE 802.11 b/g/n
- OS Support : Android, iOS, Windows, Mac OS
- Image Sensor: 1/4 inch Color CMOS UXGA (2 Mega Pixel)
- Sensor Pixel : Effective pixel : 1,624 X 1,212 Pixel
- Image Capture Size : Wi-Fi Video Streaming VGA (640 X 480)
- Image Frame Rate : VGA (640 X 480) - 30 Frame Max
2 M (1,600 X 1,200) - 15 Frame Max
- LED : Dip LED X8
- Camera Button Function : Start, Mode Change, Image Capture, Analysis, Result
- High Magnification Lens :
1. X 60 - NL
2. X 60 - PL
3. X 200 - NL (Crop)
4. X 200 - PL (Crop)
- Focusing : Fixed Type
- Battery : Type: Li-ION / Typical Capacity: 1,150 mAh
- Normal Voltage: 3.7 V
- DC IN Adaptor: 5V DC / 2A
- Out Dimension: 69(W) X 100(H) X 22(D )mm (API-100)
- Weight: About 100 g (with Battery)
- Cradle : Stand
The API Analyzer Series is designed for a seamless, intuitive user experience, offering simple yet advanced skin and hair analysis. This series prioritizes ease of use while delivering precise diagnostics.
API 202 Hair Analysis Measures:
1.Hair Loss Status
2. Scalp Status
3. Hair Density
4. Keratin of Scalp
5. Sensitivity
6. Hair Thickness
7. Hair Pore Status
Wi-Fi Video Streaming Solution:
VGA (640 X 480) | 30 FPS Max
SPECIFICATION:
- Wi-Fi Type : Wireless LAN IEEE 802.11 b/g/n
- OS Support : Android, iOS, Windows
- Image Sensor : 1/4 inch Color CMOS UXGA (2 Mega Pixel)
- Sensor Pixel : Effective pixel : 1,624 X 1,212 Pixel
- Image Capture Size : Wi-Fi Video Streaming VGA (640 X 480)
- Image Frame Rate : VGA (640 X 480) - 30 Frame Max
- LED : Dip LED X 8 ( NICHIA / Japan )
- High Magnification Lens 1. X 60 - NL
2. X 60 - PL
3.X 200 - NL (Crop)
4.X 200 - PL (Crop)
- Focusing : Fixed Type
- Battery : Type: Li-ION / Typical Capacity: 1,150 mAh
- Normal Voltage: 3.7 V
- DC IN Adaptor : 5V DC / 2A
- Out Dimension : 50 (W) X 162 (H) X 60 (D) mm (API-100 / Camera Only )
- Weight : About 120 g (API-100 / Camera Only / with Battery)
- Cradle : Stand
- Big data analysis and management through AI cloud server
- The device for acquring health information and having multi-function portable thermometer that can provide visual information
- Obtained certificate of New Excellent Technology(NET)
SPECIFICATION:
- USB Type : UVC V 1.1
- Support USB Connector Basic : USB Micro-B (USB Converter : USB-C, USB-A)
- USB Support OS : Android 4.0 and later, Windows(7,8,10)
- Camera Button Functions : Remote : Start, Mode Change, Still Image Capture, Measurement, Result
- Out Dimension : [30(W)X212(L) (With Bebe-TMC)]
- Weight : About 87 g (With Bebe-TMC)]
- Operating Humidity - 5 - 85 percentage
- Wi-Fi Type (with ARH-WM) : Wi-Fi : Wireless LAN IEEE 802.11 b/g/n
- Battery : Polymer Li-ion [3.7 V, 700 mAh]
- Wi-Fi Support OS: Android 4.0 and later, iOS 7.0 and later, Windows(7,8,10),MAC OS
Use 2.4GHz ISM frequency band.
350 m transmission range without any holdback.
Support DVD, DVR, IPTV, CCTV Camera, Satellite receiver, Digital STB and other AV output devices.
Supports video transmission of PAL/ NTSC system and stereo audio transmission, Pictures received are clear, flamboyant and stable.
Use 2.4GHz ISM frequency band.
500 m transmission range without any holdback.
Support DVD, DVR, IPTV, CCTV Camera, Satellite receiver, Digital STB and other AV output devices.
Supports video transmission of PAL/ NTSC system and stereo audio transmission, Pictures received are clear, flamboyant and stable.
1.7 inch 16:9 high definition touch screen display
2.Built-in super slim antishock car specific loader
3.Color system: PAL/NTSC/SECAM automatic switch
4.Multiple formats: DVD/VCD/MP3/MP4/CD-R/CD-RW/JPEG compatible
5.1 AV input interfacing with parking sensor system ,2 AV output
6.Full function remote control operation
7.built-in AM/FM tuner
8.built-in 4?45W Amplifiers
8.USB port compatible
9.TV module built-in with high sensitivity TV tuner
10.Bluetooth function ,can be dial-up by touch screen
11.built-in GPS
12.Ipod
13.RDS
1. With microprogramming technology,digital auto remote control and performance of stabilization
2. (wireless telecommunication)
3. Independent system of controllization of doorbell including self-monitor/unlock/call
4. Auto-closure of power-supply, the power-supply auto turn into the calendar & clock window while the work is over.
5. One outside-fix doorbell can multi-connect the inside-fix doorbells ,on the contrary, the same .
6. The remote control distance is roughly 100-150m
7. Color display screen in TFT 3.2 inch
8. 2.4G launch frequency the power below 17DBM
9. pretty shape and fire-proof material outside
10 24h-auto-monitoring for your home
Tech-specification
1. Video monitor :300 thousand definition of CMOS color
2 .Display Screen: 3.2£¢color LCD
3. Power supply : 18 VDC
4. One outside-fix doorbell can multi-connect 3 or 8 inside-fix doorbells
5. power consumption: consumption of standby is less than 0.3W and the most is 15W
6. resolution ratio : 640*380(color)
7. Light of Night vision : Infrared ray
8. Surrounding temperature: -20¡æ~60¡æ
9. Weight : 15kg
Still the greatest thing to happen since IR remote control. The award-winning Remote Extender is now improved and we call it Remote Extender Plus. Simply install our battery transmitter in place of one of the AA or AAA batteries inside your remote control, then point the receiver or attach the bright eye emitter to the components you wish to control. Now you've converted your existing IR Remote to Digital RF, giving you the freedom to go from room-to-room and control your components anywhere in the house.
The Remote extender plus gives you the ability to control two same brand components independently.
Works with most AA and AAA remotes
Single-Eye IR Emitter included
Receiver has built in charger and comes with (2) 2/3 AA specially sized rechargeable batteries.
Available in 433 MHz frequencies
Blister package
1100 2 4Ghz Wireless Av Sender With Ir Remote Extende Suppliers
Short on time? Let 2 4Ghz Wireless Av Sender With Ir Remote Extende sellers contact you.
