Forward/backward/left/right
Battery:2xAA(for car, not included), 2xAA (for controller, not included)
Vehicle size: 14x8.5x8CM
Color: green, red
Age grade: 3+
Castor meal is also variously called castor meal, castor residue, castor extract & de-oiled castor cake
Castor meal - the residue obtained from castor cake by the solvent extraction process - is one of the most versatile natural manures. It is truly organic manure which enhances the fertility of the soil without causing any damage or decay. It is enriched with the three big elements vital and conducive to the proper growth of crops - Nitrogen, Phosphorus and Potassium. It also has traces of nutrients like Manganese, Zinc and Copper, thus making it a balanced fertilizer. Moreover, it helps to neutralize the detrimental effects of chemical fertilizers. Apart from their contribution to Nutrients, they have a number of benefits in agriculture, which none of the synthetic fertilizers or pesticides can offer. They bring in the wonderful molecules that nature has designed to help the plants flourish naturally. They provide slow and steady nourishment, stimulation, protection from soil nematodes and insects; improve yields, and quality of product like taste, flavour, amino acid composition etc.
The pressed cake obtained after the expression of castor bean. The solvent extracted cake, although rich in protein cannot be used as cattle fodder because of its toxicity. However, it can be used as a fertilizer.
The protein content of castor seed meal varies from 21-48% depending upon the extent of decortications. It has an ideal amino acid profile with moderately high Cystine, mithionine, and isoleucine. But its ant nutritional substances, ricin, ricine and an allergen restrict its use in poultry feed, even at a very low level of inclusion.
Castor Cake is an excellent fertilizer because of high content of N (6.4%), Phosphoric Acid (2.55%) and Potash (1%) and moisture retention.
There is negative correlation between the contents of ricinine in castor seeds and oil content (r = -0.76). This content of ricinine in castor seed is determined by Agro climatic conditions.
Nutrient content of Castor Cake:
Organic matter - 75 - 80 %, Nitrogen - 4.0 - 4.5 %, Phosphorous - 1.5 %, Potassium - 1.25 - 1.5 %.
It also contains some micro nutrients viz., Calcium, Magnesium, Sulphur, Iron, Zinc, Manganese, Copper etc.
A typical composition of castor residue/meal is as follows:
Nitrogen - 4% min. approx.
Phosphorous - 1% min. approx.
Potassium - 1% min. approx.
Moisture - 10 - 12 % max. approx.
Oil Content - 0.7% max. approx.
Advantages:
1. It provides all the major & minor nutrients necessary for better plant growth.
2. It also helps in increasing the nutrient uptake by plants.
3. It improves the soil fertility and productivity.
4. It is known to protect the plants from nematodes and termites.
5. It improves the yield & quality of the farm produce.
6. It improves the physical, chemical and biological properties of soil
Sweet marjoram: Origanum (O) hortensis (orMajoranahortensis).
Potmarjoram: O.onites
Wildmajoram: O.vulgare.
Syrian majoram is called zatar
Family: Labiatae or Lamiaceae (mint family).
In Europe, marjoram was a traditional symbol of youth and romantic love. Used by Romans as an aphrodisiac, it was used to cast love spells and was worn at weddings as a sign of happiness during the middle Ages. Greeks who wore marjoram wreaths at weddings called it “joy of the mountains.” It was used to brew beer before hops was discovered, and flavored a wine called hippocras. A cousin of the oregano family, marjoram originated in Mediterranean regions and is now a commonly used spice in many parts of Europe. Called zatar in the Middle east and often mistaken for oregano, it is also a popular spicing in Eastern Europe.
Origin and Varieties
Marjoram is indigenous to northern Africa and southwest Asia. It is cultivated around the Mediterranean, in England, Central and Eastern Europe, South America, the United States, and India.
Description
Marjoram leaf is used fresh, as whole or chopped, and dried whole or broken, and ground. The flowering tops and seeds, which are not as strong as the leaves, are also used as flavorings. Sweet marjoram is a small and oval-shaped leaf. It is light green with a greyish tint. Marjoram is fresh, spicy, bitter, and slightly pungent with camphor like notes. It has the fragrant herbaceous and delicate, sweet aroma of thyme and sweet basil. Pot marjoram is bitter and less sweet.
Chemical Components
Sweet marjoram has 0.3% to 1% essential oil, mostly monoterpenes. It is yellowish to dark greenish brown in color. It mainly consists of cis-sabinene hydrate (8% to 40%), -terpinene (10%), a-terpinene (7.6%), linalyl acetate (2.2%), terpinen 4-ol (18% to 48%), myrcene (1.0%), linalool (9% to 39%), -cymene (3.2%), caryophyllene (2.6%), and a-terpineol (7.6%). Its flavor varies widely depending on its origins. The Indian and Turkish sweet marjorams have more d-linalool, caryophyllene, carvacrol, and eugenol. Its oleoresin is dark green, and 2.5 lb. are equivalent to 100 lb. of freshly ground marjoram. Marjoram contains calcium, iron, magnesium, phosphorus, potassium, sodium, vitamin A, vitamin C, and niacin.
Culinary uses of Marjoram
Marjoram is typically used in European cooking and is added to fish sauces, clam chowder, butter-based sauces, salads, tomato-based sauces, vinegar, mushroom sauces, and eggplant. In Germany, marjoram is called the “sausage herb” and is used with thyme and other spices in different types of sausages. It is usually added at the end of cooking to retain its delicate flavor or as a garnish. It goes well with vegetables including cabbages, potatoes, and beans. The seeds are used to flavor confectionary and meat products.
[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate
[English name] Sodium dodecyl sulfate.
[Abbreviation] SDS
[CAS No.] 151-21-3
[Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl
[Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl)
[Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards.
[Technical Indicators]
[Performance and Applications]
This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries.
(1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc.
(2) Used as anionic surfactant, emulsifier and foaming agent
(Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc.
(4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation.
(5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent.
(Use 6) Biochemical analysis, electrophoresis, ion pair reagent
Chemical name:Magnesium nitrate
Molecular formula:Mg(NO3)2.6H2O
Molecular weight:256.40
Property:soluble in water,liquid ammonia, methanol and ethanol.Stable at room temperature, the relative density of 1.461, higher than the melting point of 95�°C off the water to generate alkaline magnesium nitrate, heated to 300�°C begins to decompose above 400�°C to completely decompose into magnesium oxide and Nitrogen oxide gas.
Quality standard:
Item Indicator
Industrial grade Agriculture grade
Magnesium nitrate (Mg(NO3)2.6H2O) â?¥98.0% â?¥98.0%
PH value â?¥4 ---
Heavy metal â?¤0.002 ---
Water insoluble â?¤0.05% â?¤0.1%
Iron â?¤0.001% ---
Magnesium oxide content(CaO) --- â?¥15%
Nitrogen content(N) --- â?¥10.7%
Use:Concentrated nitric acid for industrial de-water agent, manufacture of explosives, catalysts and other magnesium salts and nitrates catalyst raw materials, wheat ashing agent.Used in agriculture, magnesium soluble fertilizer for soilless culture.
Packing:25/50KGlined with plastic bag and exterior is woven bagPacking or according to customers requirements.
1.Purity 98% white granule
2.Used for fertilizer or industrial material
3.Export Asia/Europe
4.ISO9001
17390 1:43 27Mhz 4 Channel Mini R C Atv Suppliers
Short on time? Let 1:43 27Mhz 4 Channel Mini R C Atv sellers contact you.
1, anti-cancer anti-cancer: radish contains lignin, can improve the vitality of macrophages, phagocytosis of cancer cells. In addition, radish contains a variety of enzymes, can break down carcinogenic nitrite amine, with anti-cancer effect.
2, rejuvenation anti-aging: radish is rich in vitamin A, vitamin C and other vitamins, especially in the leaves of vitamin C content is more than 4 times the root. Vitamin c can prevent skin aging, prevent the formation of black stains, keep the skin white and tender.
In addition, vitamin a and vitamin c have antioxidant effect, can effectively inhibit cancer, can also prevent aging and atherosclerosis and so on.
3, fitness disease prevention: white radish containing mustard oil, amylase and crude fiber, with the promotion of digestion, increase appetite, accelerate gastrointestinal motility and cough and phlegm effect. Chinese medicine theory also believes that the taste Xin Gan, cool, into the lung and stomach, for the diet to share, can be treated or adjuvant treatment of various diseases, Compendium of Materia Medica called the most beneficial vegetables.
4, clean bowel detoxification: In addition to vitamins, white radish in the dietary fiber content is very impressive, especially in the leaves contained in the plant fiber is rich. These plant fibers can promote gastrointestinal motility, eliminate constipation, play the role of detoxification, thereby improving the skin rough.
1. Anti-tumor: cucumber contains cucurbitacin C has the role of improving the immune function, can achieve the purpose of anti-tumor. In addition, the substance can also treat chronic hepatitis
2. Anti-aging: old cucumber is rich in vitamin E, can play a longevity, anti-aging effect; cucumber in the cucumber enzyme, has a strong biological activity, can effectively promote the body's metabolism. Smear the skin with a cucumber Daozhi, with moisturizing effect, stretch the effect of wrinkles
3. Alcoholism: Cucumber contains alanine, arginine and glutamine on liver patients, especially in patients with alcohol cirrhosis have some adjuvant therapy, can prevent alcoholism
4. Hypoglycemic: cucumber contains glucoside, fructose and so do not participate in the usual sugar metabolism, so the diabetic cucumber instead of starchy food to eat, blood sugar will not increase, or even lower
5. weight loss strong body: cucumber contains propionic acid, can inhibit the conversion of carbohydrates into fat. In addition, the cucumber in the promotion of human intestinal corrupt substances in the exclusion of drugs, as well as lower cholesterol have a certain role, can keep fit.
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)
1) Buyer issues ICPO and certificate of incorporation
2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.
3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR
4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.
5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means ofMT103-
6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and Conditions of the sales and purchase agreement contract between buyer and seller .
Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.
Available stock in Rotterdam tank farm for jet fuel A1:
CI DIP AND PAY FOB PROCEDURE
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin,
EN590 FOB price is $470/mt including $10 commission to buyer's side.
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:
SGS Report
Tank Storage Receipt (TSR)
Product Analysis
Injection Report
Authority to Verify (ATV)
Refinery Commitment Letter
Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
8. Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment
EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.
2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.
3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.
4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).
5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.
6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).
7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.
8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction
EN590 10ppm Kazakhstan origin from the largest trusted Refinery in Kazakhstan available for CIF or TTO transactions Very competitive price
TCO CIF
Terms Of Transaction
Delivery Ciftto 1521 Days To Any Safe World Port
Payment Term Dlclc Blcmt 103 Tt Wire
Origin Kazakhstan
Specification To Be Provided Upon Receipt Of Buyers Loiicpo
Inspection Any Universally Accepted Qq Inspection Company
Commission To Be Shared 50 Each By Both Sides
Performance
Bond
2
Procedures Transaction Procedure CIF
1Buyer issues Irrevocable Purchase Order ICPO with buyers banking details
and passport data of buyerrepresentative
2 Seller issues Draft contract for both parties to sign within 24 hours buyer signs and send back
with guarantee letter and proof of funds to fulfil the contractual agreement
3 Seller reissues the Proof of Product documents in buyer companys name as listed below
3 a Certificate of Origin
3 b Product quality passport Analysis test Report Kazakhstan GOST R
3 c Commitment to Supply
3 d Statement of Product Availability
3 e Product Allocation Export Permit
4 Upon verification of the sellers partial POP within seven 7 banking days the buyers bank
sends irrevocable operational DLC via MT700 as per the sellers credit bank account for the first
month fee In the event of the buyers banks inability to issue the letter of credit within seven 7
banking days the buyer will make a guaranteed cash deposit of USD 300000 by TT WIRE bank
transfer to the sellers bank account as security of the product allocation and also to enable the
seller to charter a vessel and start shipping This payment will be deducted from the total cost of
the product after inspection at the port of discharge
5 Upon confirmation of buyers Letter of Credit or Cash Guarantee Deposit payment at sellers
bank seller transfer title holder of the cargo to buyer issue the 2 PB and commence loading of
the cargo into the vessel tanker Upon completion of loading the cargo seller will issue the full
POP and shipping documents to buyer as shown below
Allocation Title Ownership Certificate
TransNeft Contract to transport the product to the loading port
Port storage agreement
Charter party Agreement to transport the product to the discharge port
Tank Storage Receipt
SGS Quality and Quantity Certificate
Bill of Landing
Vessel Questionnaire 88
6 NCNDA IMFPA shall be issued for all BuyerSeller Intermediaries to complete for further
processing by the Seller
7 Shipment shall commence and upon arrival of the vessel tanker at the final discharge port the
buyer shall conduct the SGSCIQ Inspection and make the balance payment for the full shipment
via TT Wire or MT103 TT Wire Transfer
8 The seller pays all buyer and seller intermediaries the full commission amount as stated in the
NCNDAIMFPA agreement
CURIA YG is a Vegan, Gluten-Free, Plant-based and Non-GMO starch used as curdling and thickening agent in Yogurt and Lassi. No addition of preservative and Mono sodium Glutamate in the starch.
APPLICATIONS
1. First add 2% to 10% of CURIA- YG based on the Protein Content of the Milk in cold (40C to 360C) condition. Dissolve it well without Lump formation.
2. Heat the milk mixer to 850 c & hold it for 12 minutes with continuous stirring.
3. Cool the pasteurized milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture.
4. Then keep it in an incubator @ 430c for 6 hours and transfer it to chiller.
OR
1. Add 2% to 10% of CURIA- YG based on the Protein Content of the hot milk at 800C to 850C and stir continuously for 2 minutes without lump formation
2. Cool the milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture.
3. Then keep it in an incubator @ 430c for 6 hours and transfer it to chiller.
DOSAGE
For excellent results, use 2 to 10% CURIA-YG of total batch size, based on the Protein Content of the Milk. For Lower Protein Content in the Milk higher Curia-YG NEED TO BE USED.
CURIA YG (P33) is a special curdling and thickening agent for yogurt and lassi. It has no added preservative and Mono sodium Glutamate.
FEATURES AND BENEFITS
â?¢ 100% Natural. Protein and carbohydrate derivative.
â?¢ Improves thickness.
â?¢ Improves smooth texture.
APPLICATIONS
1. First add 2% to 3 % of CURIA- YG(P33) to the milk in cold (40C to 360C) condition. Dissolve it well without Lump formation.
2. Heat the milk mixer to 850 c & hold it for 12 minutes with continuous stirring.
3. Cool the pasteurized milk to 43 0c to 45 0c with slow stirring and then add required quantity of Culture and stir it slowly for even mixing of culture.
4. Then keep it in an incubator @ 430 c for 6 hours and transfer it to chiller.
TYPES
1
Cement 42.5 N
CEM II/A-L
Bulk
2
Cement 42.5 R
CEM II/A-L
Bulk
3
Cement 42.5 N
CEM II/A-L
Big Bag 1.5MT
4
Cement 42.5 R
CEM II/A-L
Big Bag 1.5MT
5
Cement 42.5 N
CEM II/A-L NA 442
Bag 50Kg BUNDLED 2,2 MT per pallet
6
Cement 42.5 N
CEM II/A-L NA 442
Bag 25kg BUNDLED 2,15 MT per pallet
7
Cement 42.5 N-LH/SR5
CEM I
Bulk
8
Cement 42.5 N-LH/SR5
CEM I
Bag
9
Cement 52.5
CEM I
Bulk
10
Cement 52.5
CEM I
Bag
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller ´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
Please contact for full specs on quantities, delivery terms, etc...
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
17390 1:43 27Mhz 4 Channel Mini R C Atv Suppliers
Short on time? Let 1:43 27Mhz 4 Channel Mini R C Atv sellers contact you.
