Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
Features
Wide operating wavelength range
Low insertion loss
Ultra flat wide passband
High channel isolation
High stability and reliability
Epoxy-free on optical path
Applications
Testing instruments
Ftth tri-play system
Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
Features
L wide operating wavelength range
L low insertion loss
L ultra flat wide passband
L high channel isolation
L high stability and reliability
L epoxy-free on optical path
Applications
L testing instruments
L ftth tri-play system
FWDM is based on proven thin-film folter technology.This WDM is widely used in fiber optical communication system and EDFA where flat and broad operating bands are needed.
Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
Features
L wide operating wavelength range
L low insertion loss
L ultra flat wide passband
L high channel isolation
L high stability and reliability
L epoxy-free on optical path
Applications
L testing instruments
L ftth tri-play system
Performance specifications
Parameter Fwdm 4/35 Fwdm 5/34 Fwdm 34/5
Pass band wavelength range (nm) 1480~1500 1540~1560 1260~1360&1480~1500
Reflection band 1 wavelength range (nm) 1260~1360 1260~1360 1540~1560
Reflection band 2 wavelength range (nm) 1540~1560 1480~1500
Insertion loss (db) Reflect channel =0.6
Pass channel =0.8
Pass band rippler (db) 15
Pass channel >30
Insertion loss temperature sensitivity (db/ºc)
Flyin Optronics' MMWDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
Features
l Wide Operating Wavelength Range
l Low inertion loss
l Ultra Flat Wide Passband
l High Channel Isolation
l High stability and reliability
l Epoxy-free on Optical Path
Applications
l System Monitoring
l WDM Network
l Transmitters and Fiber lasers
l Fiber Optical amplifier
l Fiberoptic Instruments
Ruik's FWDM Device is a device to combine the two different wavelengths from the fibers to one output fiber.
PM FWDM Device
Features Applications
Low Insertion Loss CATV System
High Return Loss CWDM/DWDM Module
High Reliability & Stability EPon/Gpon Networks
Specifications
Parameters Values
Type 0698 5598 5506 5548
Transmission Wavelength 1020~1080nm 1520~1580nm 1520~1580nm 1535~1565nm
Reflection Wavelength 960~990nm 960~990nm 1020~1080nm 1480±10nm
Max.Insertion Loss of Transmission Channel 0.8dB 0.7dB 0.8dB 0.8dB
Max.Insertion Loss of Reflection Channel 0.6dB 0.5dB 0.6dB 0.6dB
Min.Transmission Isolation@Reflection Wavelength 25dB 30dB 25dB 25dB
Min.Reflection Isolation@Transmission Wavelength 15dB 15dB 15dB 15dB
Max.Channel Flatness 0.4dB
Min.Extinction Ratio at 23 18dB
Max. Wavelength Thermal Stability 0.003nm/
Max. Insertion Loss Thermal Stability 0.005dB/
Min.Return Loss 50N
Max.Power Handling (CW) 300mW
Operating Temperature 0~+70
Storage Temperature -40~+85
For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower.
The default connector key is aligned to slow axis.
Company introduction:
High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
Ruik's FWDM Device is a device to combine the two differnt wavelength from the fibers to one output fiber.
RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
SM OTDR Optical Time Domain Reflectometer,
Model# FHO5000-D35
- SM OTDR
- 7'' High Resolution Screen
- Wavelengths: 1310/1550nm
- Dynamic Range:35/33dB
- Event/ Attenuation Dead zone: 1M/ 4M
- Selectable Distance (Km): 4m-240km
- Print Report easily
- Connect to your computer with a cable
- Real time & Averaging testing mode
- With .sor software & A->B, B->A analysis software
- Free updating software
- With Black Carrying bag
Specification:
OTDR (MODEL# FHO5000-D35)
General Parameters
Testing Wavelength 1310/1550nm
Dynamic Range 35/33dB
Event Dead Zone 0.8m
Attenuation Dead Zone 4m
Pulse Width 3ns, 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1µs, 2µs, 5µs, 10µs ,20us
Testing Range Dead zone, 500m, 2km, 5km, 10km, 40km, 80km, 120km, 160km, 240km
Sampling Resolution Minimum 0.25m
Linearity = 0.05dB/dB
Display Resolution 0.01dB
Loss Threshold Step 0.01dB
Loss Resolution 0.001dB
Distance Resolution 0.01m
Sampling Point Maximum 128,000 points
Distance Accuracy ± (1m+measuring distance×3×10-5+sampling resolution)
Data Storage 40000 groups of curve
Internal VFL Parameter
Laser Launcher Type LD
Output Power 10mW
Distance Range About 12km
Optical Connector FC/UPC
Output Wavelength 650nm ± 10nm
Modulation Frequency CW / 2Hz
Physical Parameters
Interface Internet port, 3 USB port
Display 7 inch TFT-LCD Screen
Battery 7.4V/4.4Ah lithium battery, continuous 5.5 hours
Working Temp -10°C~+50°C
Storage Temp -20°C~+75°C
Dimension 253×168×73.5mm / 1.5kg
Accessories
Standard Accessories 1* FHO5000
1* Quick guide
1* USB cord
1* 12V AC/DC adapter
1* Battery
1* Software CD
1* FC adapter
1* Carrying case
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM devices.
PM Isolator & WDM Hybrid
Features Applications
Low Insertion Loss Fiber Laser
High Return Loss Fiber Amplifier
High Isolation Testing Equipment
High Extinction Ratio
High Reliability & Stability
Specifications
Parameter Value
Stage - Single Dual Single Dual
Signal Channel Signal Wavelength Range 1064�10nm 1550�15nm
Max. Insertion Loss 2.6dB 3.8dB 0.9dB 1.0dB
Typ. Peak Signal Reversed Isolation, at 23 40dB 52dB 40dB 52dB
Min. Signal Reversed Isolation, at 23 28dB 45dB 28dB 45dB
Min. Isolation (Com to Pass @ Ref band Wavelength) 30dB
Min. Extinction Ratio at 23 20dB
Reflection Channel Wavelength Range 960~990nm
Max. Insertion Loss 0.6dB
Min. Isolation (Com to Ref @ Pass band Wavelength) 15dB
Min. Extinction Ratio at 23 18dB
Min. Return Loss 50dB
Max. Insertion Loss Thermal Stability 0.005dB/
Max. Optical Power(CW) 300mW
Max. Tensile Load 5N
Operating Temperature -5~+70
Storage Temperature -40~+85
For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower.
The default connector key is aligned to slow axis.
Company introduction:
High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device.
PM Tap & Isolator & WDM Hybrid (Faraday Based)
Features Applications
Low Insertion Loss EDFA
High Return Loss Pump Laser
High Extinction Ratio Optics Cutting
High Isolation Research
Specifications
Parameter Unit Value
Stage - Single Dual Single Dual
Signal Wavelength nm 1064±5 1550±15
Signal Wavelength Range nm 1020~1080 1520~1580
Max. Excess Loss, λc, at 23 2.5dB 3.5dB 1.3dB 1.4dB(Input to Output)
Min. Signal Isolation, λc,±15 at 23 35dB 45dB 28dB 45dB(Output to Input)
Isolation for Channels Signal Channel 30dB
Pump Channel 12dB
Tap Ratio 1~50%
Pump Wavelength Range 980±10nm
Max. Insertion Loss (Pump Channel) 0.7dB
Min. Extinction Ratio at 23, only for PM Channel 20dB
Min. Return Loss 50dB
Max. Optical Power(CW) 300mW
Max.Tensile Load 5N
Operating Temperature -5~+50
Storage Temperature -40~+85
Company introduction:
High power Optical Fiber Components:
-Optical Fiber Isolator, up 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device.
PM Isolator & WDM Hybrid
Features Applications
Low Insertion Loss Fiber Laser
High Return Loss Fiber Amplifier
High Isolation Testing Equipment
High Extinction Ratio
High Reliability & Stability
Specifications
Parameter Value
Stage Single Dual Single Dual
Signal Channel Signal Wavelength Range 1064±10nm 1550±15nm
Max. Insertion Loss 2.6dB 3.8dB 0.9dB 1.0dB
Typ. Peak Signal Reversed Isolation, at 23 40dB 52dB 40dB 52dB
Min. Signal Reversed Isolation, at 23 28dB 45dB 28dB 45dB
Min. Isolation (Com to Pass @ Ref band Wavelength) 30dB
Min. Extinction Ratio at 23 20dB
Reflection Channel Wavelength Range 960~990nm
Max. Insertion Loss 0.6dB
Min. Isolation (Com to Ref @ Pass band Wavelength) 15dB
Min. Extinction Ratio at 23 18dB
Min. Return Loss 50dB
Max. Insertion Loss Thermal Stability 0.005dB/
Max. Optical Power(CW) 300mW
Max. Tensile Load 5N
Operating Temperature -5~+70
Storage Temperature -40~+85
For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower.
The default connector key is aligned to slow axis.
Company introduction:
High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device.
RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device
RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
This product can also be used to multiplex other wavelengths. including 980/1030 nm (pulsed laser applications) and 1064/1550 nm (Erbium-Ytterbium pumping). Low power (300 mW, 500 mW) and high power (20W) handling are available. They are ideal for polarization maintaining fiber amplifiers, fiber lasers, and high-speed communication system and instrumentation applications.
Fused Type PM Fiber WDM
Features Applications
High Extinction Ratio Testing Instruments
High Isolation Coherent Communication
Low Insertion Loss EDFA
High stability & Reliability Fiber Sensor
Specifications
Parameter Value
Type 980/1550
Operating Bandwidth ±15nm
Max. Insertion Loss Signal Port 0.5dB
Max. Insertion Loss Pump Port 0.5dB
Min. Extinction Ratio 20dB
Min, Isolation 18dB
Min. Directivity 55dB
Max. Return Loss 50dB
Max. Optical Power(CW) 1W
Fiber Type PM Panda Fiber
Package Dimension Ï?3*54mm(bare fiber, 0.9mm loose tube)
Operating Temperature -5~+65
Storage Temperature -40~+85
For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower.
The default connector key is aligned to slow axis.
Company introductionï¼?
RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device.
PM Tap & Isolator & WDM Hybrid (Faraday Based)
Features Applications
Low Insertion Loss EDFA
High Return Loss Pump Laser
High Extinction Ratio Optics Cutting
High Isolation Research
Specifications
Parameter Value
Stage Single Dual Single Dual
Signal Wavelength 1064±5nm 1550±15nm
Signal Wavelength Range 1020~1080nm 1520~1580nm
Max. Excess Loss, λc, at 23 (Input to Output) 2.5dB 3.5dB 1.3dB 1.4dB
Min. Signal Isolation, λc,±15 at 23(Output to Input) 35dB 45dB 28dB 45dB
Isolation for Channels Signal Channel 30dB
Pump Channel 12dB
Tap Ratio 1~50%
Pump Wavelength Range 980±10nm
Max. Insertion Loss (Pump Channel) 0.7dB
Min. Extinction Ratio at 23, only for PM Channel 20dB
Min. Return Loss 50dB
Max. Optical Power(CW) 300mW
Max.Tensile Load 5N
Operating Temperature -5~+50
Storage Temperature -40~+85
Company introduction:
RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
This product can also be used to multiplex other wavelengths. including 980/1030 nm (pulsed laser applications) and 1064/1550 nm (Erbium-Ytterbium pumping). Low power (300 mW, 500 mW) and high power (20W) handling are available.They are ideal for polarization maintaining fiber amplifiers, fiber lasers, and high speed communication system and instrumentation applications.
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device
RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
