Find Verified 13 56Mhz Rfid Reader Module Jmy6021 Suppliers, Manufacturers and Wholesalers

JMY6021 is based on NXP MF RC500, MF RC531, SL RC400 or CL RC632 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693, and ISO7816(2 SAM Slots) protocols. The dimension is 100mm * 70mm * 10.6mm

YST307GU series are RFID reader/writer module which pick or send command by USB ports. YST307GU series meet kinds of international contactless IC card standards. Also YST307GU series can support kinds of cards from suppliers. YST307GU series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout.
Characters:
The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout.
Qualifications
PCD: NXP RC400
Working frequency: 13.56MHz
RF standard: ISO15693
SAM card slot: 2
Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.
Auto detecting card: yes, default OFF
EEPROM: 4K
Interface: USB
Max command length: 1024 Bytes
Interface level: 3.3V
Power consumption: 50mA
Dimension: 80mm*60mm*8.5mm
Package: DIP32
Weight about:100g

YST307AS series are RFID reader/writer module which pick or send command by RS232 ports. YST307AS series meet kinds of international contactless IC card standards. Also YST307AS series can support kinds of cards from suppliers. YST307AS series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout.
Characters:
The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout.
Qualifications
PCD: NXP RC500
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO7816
SAM card slot: 2
Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.
Auto detecting card: yes, default OFF
EEPROM: 4K
Interface: RS232
Max command length: 1024 Bytes
Interface level: 3.3V
Power consumption: 50mA
Dimension: 80mm*60mm*8.5mm
Package: DIP32
Weight about:100g

Key features:
Frequency available with 125khz
3.3v ~ 5v dc power supply, uart-ttl interface
R/w or read-only uid of t5577 and its compatible cards;
Available to set to read different page or block address with password;
Optional output as wg26, wg34 or uart ttl
External antenna, reading range up to 5~7cm
External led&buz available( external driver circuit needed


Technical parameters:

Electrical specification
Power supply dc 3.3v-5v
Power consumption < 45ma
Operation frequency 125khz
Baudrate 9600~115200 bit/s ( default 9600bps)
Interface uart ttl
Antenna external, stamp-hole
Reading range 50- 70mm (depends on tag and antenna size)

Mechanical specifications
Dimension 25mmx16.5mmx2.8mm (lxwxh)
Weight 3g
Material fr-4, blue
Model chk102mt

Environmental conditions
Operation temperature -20 +80 degree
Storage temperature -40 +85 degree
Humidity relative humidity 595%

Supported standard/ tags
T5567,T5577 and compatible cards

Sdk information
Demo software windows, c# program language
Files comprotocol document
User manual
Demo.Exe

Protocol: ISO/IEC14443 Type A/B
Support contact & contactless CPU card, Mifare one S50/ S70/ Ultralight, Mifare Pro
Dimension: 95mm*95mm*22mm
Read distance: 30 mm-100 mm
Port: RS232/USB Plug and play
Buzzer, LED indicator
Power supply: USB / DC 5.0V Current: <150 m A
Work Temp: -20 - +70
Casing: ABS .

Carton box.

RFID reader

Erfid09A USB Interface Card Issuing Devices realize the function of transiting the data from reader to PC via USB Port. The user has no need to download any driver program. You just plug it to USB Port for normal working. It cans instead previous PS/2 Interface Issuing Device. If your Computer Keyboard port has no sufficient power, or not convenient for keyboard output, or with broken keyboard, especially Notebook PC has no PS2 Keyboard out, Erfid09B provide ideal solution for above case. Also this type is with the advantage of no Driver, no additional power.

Asia RFID is a one-stop shop. We can provide high quality RFID products and services. RFID Reader is used for reading RFID cards and tags, and it has the adjustable produces to suit for the reading system.We could provide all kinds of frequencies, such as LF, 125khz, HF, 13.56MHz, and UHF, 860-960MHz.If you have the request for color, size or style, we can custom the reader for you.
Of course, we also have more new products. You must like them. Please visit RFID Wristbands and RFID Tags.
For more information or about RFID products, please contact us or call us.

Model number Rl-r49
Size 220*140*70mm
Rf output 20-30dbm
Chip Impinj indy r2000
Frequency Uhf 865-868mhz, 902-928mhz
Work model Fhss or fixed frequency

Power consumption <18w
Sdk C#, c++
Application Library management, warehouse management, vehicle tracking, etc, access control, production and so on


Carton box package

Long range, special for large area facility or building

Model ak-fr001

This allink 4 port long range fixed uhf rfid reader, it¡¡¥s developed base on impinj r2000 project, multiple mission and better function of anti-interference, adopt special format to reduce noise¡ê¬ rssi is more stable and reliable, so easier to read. This reader is used in many kinds of area, such as warehouse, asset tracking, intelligent transportation, security, and etc.

Features:
Comply with protocol epc c1 gen2/iso 18000-6c
Powerpc format cpu mpc8308, ram 128m
Function of carrier wave elimination, better capacity of anti-inteference
Support drm reading
More sensitive, longer range reading
With 4 port for uhf rfid antenna
Tag reading speed could reach 640kbps
Setting is flexible, to read maximun quantity of tags, so could meet different working condition

Specification:
Chip: phy: impinj r2000, mac: at91sam7s-256
Protocol: epc c1 gen 2, iso18000-6c
Dense reader mode management: software setting, automatic event trigger and events management
Frequency: from 840 to 960mhz (adjustable)
Type of modulation: fhss or fixed frequency (adjustable)
Capacity: +10 to +32.5dbm
Type of antenna: 4 port of tnc connector single polariztion antenna.
Size: 260mm x 210mm x 43mm
Weight: 2.5kg
Installing way: fixed by steel frame
Power supply: dc24v, 2a
Power consumpation: 30w (normally)
Processor: freescale mpc8308
Memory: 128mb
Flash: 8mb+256mb (optional)
System: linux
Development interlace: binary stream, c/c#/c++
Communication port: ethernet 10/100m base-t (rj-45), 2 pieces of rs232, one for testing. Gpio 4 pieces of input port and 4 pieces of output port. (optical coupling isolation¡ê©
Working condition: humidity 10-85%, no dew trop. Working temperature from -20¡ãc to 55¡ãc, stock temperature from -45¡ãc to 85¡ãc, waterproof class is ip53.

2.5kg/pc

JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.
Qualifications:
PCD: NXP RC500, RC531, RC632, RC400; FM1722
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512Bytes
Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
Communication rate: IIC--400Kbps, UART--19200bps/115200bps
Max.command length: 511 Bytes
Interface level: 3.3V (TTL level; 5V tolerance)
Power supply: DC5V
Power consumption: 70mA
Dimension: 42mm¡Á21mm¡Á8mm
Package: DIP32
Weight: about 15g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
ISP: Supported
RoHS: Compliant





30 pcs per box, box size: 16cm*12cm*5cm.

JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability.

Qualifications:
PCD: NXP RC500, RC531, RC400, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default ON
SAM card slot: 1 slot, 9600bps /38400bps
EEPROM: 512 Bytes
PPSS set: Supported
Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order)
Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
Max.command length: 511 Bytes
Interface level: 3.3V (TTL level; 5V tolerance)
Power supply: 5.0V
Power consumption: 150mA
Dimension: 70mm¡Á50mm¡Á16.5mm
Weight: about 120g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
ISP: Supported
RoHS: Compliant


10 pcs per box, box size 16*12*5cm.

Qualifications:
PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made)
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (Mifare One, normal distance)
SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps
Interface: RS232C or USB (build-in CP2102 USB to RS232 converter)
Baud rate: 9600 ~ 115200 BPS
Power supply: DC5V
Power consumption: 180mA
Dimension: 123mm¡Á88mm¡Á25mm
Weight: about 150g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF


1pc/box, 16*12*5cm.

134.2 khz wand reader with bluetooh, easily communicates with all pda's and laptops via bluetooth.
Easily communicates with most popular scales.
Iso compliant reader, reads all popular hdx, fdx-b and industrial hdx tags.
Allflex, destron, digital angel, zee tags, reyflex, y-tex



Dem weight for master carton is 63.00 lbs (10 readers)

IVF-RH101 reader elf is a portable mini reader that can link with ios, android, wp etc, Intelligent system platform through 3.5mm headphone jack to use. It has the characteristic of plug-and-play, light and small size, low power consumption, built-in rechargeable battery, etc, and is easy to carry, truly make mobile identify tag at any time, anywhere, as you wishes. It¡¯s applicable to anti-counterfeiting terminal device, etc

parameter specification:
1).Support high frequency (HF) label agreement
2).Support ios, android, wp, etc Intelligent system platform
3). Material: ABS + PC engineering plastic
4). Weight: 12 g
5). Battery capacity: 130 ma
6). charge modeMicro USB 5V/0.5A
7). operating ambient temperature: -20~60
8). indicator light condition:
Normal work: green light for long
Abnormal equipment: light not on
Low electricity quantity: green light flashing(Slow flash: low power alarm; Flash: stop using low electricity)
Charging: red light for long
charge complete: green light for long
9) Communication interface: 3.5mm audio interface (Ordinary headphone jack)


Size: 39mm*30mm*11mm

Qualifications:
PCD: NXP RC500, RC531, RC632, RC400; FM1722
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm (Mifare One, normal distance)
SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps
Interface: RS232C or USB (build-in USB to UART converter)
Baud rate: 9600 ~ 115200 bps
Power supply: DC5V
Power consumption: 180mA
Dimension: 141mm¡Á100mm¡Á31mm
Weight: about 100g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF.



1 pc/box, box size: 16*12*5cm.

With the Livetrack reader, the solution allows you to print a receipt of the animal id, without using a handheld and third party software to print.

The unique print function on the reader itself is an industry first. Saving costs to the user, since there is no need to purchase a portable handheld; and software in order to print out a receipt. The Livetrack reader now has the print function built into the reader, along with our rugged mobile thermal printer; it is the perfect and cost effective way for Inspectors and large animal Veterinarians to read Animal EID tags, and then simply print the receipt of the Animal EIDÆs delivered or picked up, for the export or import of livestock.

With the Livetrack printer function on the reader, and our new mobile thermal printer, you can quickly print a receipt with all the import information needed.

The perfect solution for Inspectors, large animal Veterinarians, transports and cattlemen who transport their own cattle.


10 pieces pere master box. dem weight 63.00 Lbs.

Model ak-rfm004

This 4 antenna port uhf rfid module is equipped with impinj r2000 chip, it could work in long range reading uhf rfid
Reader. We could provide api customer port, and standard sdk. It will help you develop the right rfid device to meet whole
System quickly.

Specification:
Size: 69mm x 43mm x 10.50mm (l*w*h)
Weight: 50g
Power consumption: 1.5a peak
Working tempreture: from -20
Stocking tempreture: from -40
Physical port: 1 x mmcx, rf connector, 15pin connector(electricy source, communication, gpio)
Working frequency: ultra high frequency (840-960mhz), defauty frequency (920-925mhz), the frequency could be customized for different country.


Click to make an enquiry


50g/pc

Features
Android 7.0 operating system 
MSM 4 core CPU, 1.2GHZ; RAM: 1G; Flash: 8G
IP65/Drop resistance from 1.2m
4 inch IPS LCD screen
4G, WI-FI, Bluetooth, GPS  
Physical keypad on Android
1D CCD barcode scan, 1D laser barcode scan, 2D barcode scan
RFID reading function: LF/HF/UHF RFID Reader
High resolution fingerprint function
Fast built-in Printer
Pistol and docking station design
Dual-battery System

Applications
Logistics
Medical Treatment 
Electrical Power
Gas Inspection
Purchasing Fair
Specifications
Standard Parts
General Specifications
Operating system Android 4.4 embedded OS
CPU 1.2GHz
RAM RAM 1G; FLASH 8G 
Ports One USB 2.0 port(OTG supports U Flash Disk, Mouse, 100M ethenet), one charging mouth, one TF card(128G), one SIM card
Protection Grade
Industrial ProtectionGrade IP65
Drop Grade Drop resistance from 1.2m
Wireless Communication
Bluetooth V4.0
GPS Built-in Beidou/GPS/GLONASS; supports A-GPS; External Beidou/GPS/GLONASS; supports RTCM 2.3 differential data
WIFI Support IEEE 802.11b/g/n
4G FDD/WCDMA/GSM
LTE_FDD B1/B3/B7  LTE_TDD B41/B40  
WCDMA B1//B2/B5  
GSM 900/1800/1900
Data Acquisition (Optional)
NFC (HF) RFID:
Working frequency: 13.56MHZ
Profile: Support ISO/IEC 15693, ISO/IEC 14443A profile
Support Cards: SR176, SRIX4K (TYPE-B), I- Code2, TI RFID label-it HF-I, EM4034, Mifare Classic ETC
Identification distance: not more than 5cm
UHF RFID:
Working frequency: 840-960MHz(customization of requiredfrequency band)
Support agreement: EPC C1 GEN2/ISO 18000-6C /ISO18000-6B
Output power: 10dBm-30dBm
Identification distance: not more than 6m
ACTIVE RFID:
Operating frequency 2.4GHz~2.5GHz ISM
RF power range -30dBm~0.0dBm( adjusted by 32 grade )
Receiving sensitivity -90.0dBm
Reading range: 0~60m (Adjustable depending on different gain omni-directional antenna,)
Anti-collision: Up to 500 tags read simultaneously
Communication speed:250kbps, 1Mbps, 2Mbps(adjustable)
Physical Layer Parameter
Display Screen 4 inch LCD screen, 480x800 IPS screen, capacitive touch screen
Touch screen Thicken tempered glass(thickness 1mm); supports 10 points touch and double-click for waking up
Keyboard Physical keypad with 19 phiscal keys
Camera 8.0 million pixels; support auto focus and fill-flash function.
Headset Supports standard headset, Bluetooth headset; support Mike and receiver function
Vibration Function Vibrating prompt function
Sensor Supports light sensation, gyroscope, compass, gravity
Flashlight Function Used for emergency lighting
Rechargeable LithiumBattery 3.7V, 3800mAh
Handle Battery 3.7V, 5000mAh
Standby The standby current is less than 10mA
Dimension 168mm*75mm*26mm
Weight 350g
Environmental characteristics
Working Temperature -20 ~ +50
Storage Temperature -40 ~ +60
Humidity 5%-95% relative humidity; no condensation

Description

SAAT-F805S reader base on Impinj R2000 RFID chip, operates in UHF frequency band, with long distance reading, high reading accuracy, massive functions, high reliability, and strong expandability.

Main feature

UHF (840-920MHz) band, customize the local RF band (optional)
Build in Linux OS, POE optional
Base on Impinj R2000 RFID chip, read>200tag/second
Support standard RS-232, USB2.0 , Ethernet communication interfaces
Multi-group I/O ports(GPIO), to control the functional mode of the reader/writer
Super anti-collision, with special designs to eliminate interfering
4 SMA Connector, connect 4 antennas outside

The S2-EM is a compact, waterproof stand-alone programmable access control system.
The product unique feature is simple in design, easy operation, and high reliability.

Main Feature
> Waterproof, conforms to IP66
> One relay, 2000 users, standalone
> Card type: 125KHz EM card only
> Working temperature: -40 oC ~ 60 oC (-40 oF ~ 140 oF)
> Pulse mode, toggle mode
> Built in LDR for anti tamper
> Card block enrolment
> Easy for programming by master cards and remote control
> Easy for install, 6 wires only