104 Epoxy Redoxide Zinc Phosphate Primer Wholesale Suppliers, Manufacturers & Distributors

Ask for price

MOQ: MOQ: Not Specified

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Paints & Coatings

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Paints & Coatings

Description

Two component Epoxy based anticorrosive primer containing red oxide and zinc phosphate as corrosion inhibiting pigments

Recommended Use :-
This product is recommended as a primer on suitably cleaned mild steel surface in various fertilizer units, refineries, chemical and other plants, transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc. The product is recommended as a primer for mild to moderate corrosion conditions. Not to be recommended for immersed water condition.

Physical Data :-
COLOUR : Red
FINISH : Matt
SOLIDS BY VOLUME : 40 Â± 3%
THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at DFT of 30 Ã?Âµ
FLASH POINT : Base : Above 23Ã?Â°C Hardener : Above 23Ã?Â°C
DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : HARD DRY : Overnight FULL CURE : 7 days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application.

Application Data :-
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray
THINNER : Epoxy Thinner 190
POT LIFE : 4 hours min at 30C
RECOMMENDED DFT : 30 - 40
OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours
COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated Rubber and Synthetic Enamel Finish Paints.
Application Method
Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix, gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction.

Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. Add Epoxy Thinner Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth and apply uniformly over the surface. All equipments used for above should be properly clean.

For Conventional Spray application :-
Thinner : Epoxy Thinner 190
Addition : 10-15%
Nozzle Orifice : 1.2 -1.4 mm
Nozzle Pressure : 40-70 p.s.i.
For Airless Spray application :-
Thinner : Epoxy Thinner 190
Addition : Max 5% if required
Nozzle Orifice : 0.37- 0.42mm
Nozzle Pressure : 1400-1800 p.s.i.

GOLD Member

Jan-21-23

Epoxy Zinc Phosphate Primer White

MOQ: MOQ: Not Specified

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Epoxy Zinc Phosphate Primer White (A+B)

Apr-06-23

103 Epoxy Redoxide Zinc Chromate Primer

Ask for price

MOQ: MOQ: Not Specified

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Primer Paint

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Primer Paint

Description

Two component Epoxy based anti corrosive primer containing red oxide and zinc chromate as corrosion inhibiting pigments

Recommended Use :-
Recommended as a primer on suitably cleaned mild steel surface in various fertilizer units, refineries, chemical and other plants, transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc. The product is recommended as a primer for mild to moderate service conditions. Not to be recommended for immersed water condition

Physical Data
COLOUR : Red
FINISH : Matt
SOLIDS BY VOLUME : 40 + 3%
THEORETICAL SPREADING RATE : 13.33 sq.mt / lt at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 23C
DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : SURFACE DRY : 60 - 90 minutes HARD DRY : Overnight FULL CURE : 7 days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application

Application Data :-
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray / By Airless Spray
THINNER : Epoxy Thinner 190
POT LIFE at 30Ã?Â°C : 4 hours min at 30Ã?Â°C
RECOMMENDED DFT : 30 40 Ã?Âµ.
OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours
COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated Rubber and Synthetic Enamel finish paints.
Application Method
Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application.

For Conventional Spray application :-
Thinner : Epoxy Thinner 190
Addition : 10-15%
Nozzle Orifice : 1.2 -1.4 mm
Nozzle Pressure : 40-70 p.s.i.
For Airless Spray application :-
Thinner : Epoxy Thinner 190
Addition : Max 5% if required
Nozzle Orifice: 0.37- 0.42mm
Nozzle Pressure : 1400-1800 p.s.i.

GOLD Member

Nov-29-21

Didar Asia General Trading Llc

Supplier From Dubai, United Arab Emirates

Soda ash, urea 46 fertilizers, adblue, lead ingots, lead powder, npk fertilizers, rock phosphate, gypsum, base oil, white spirit, potassium chloride kcl, ammonium nitrate, ammonium sulphate, caustic soda, , triple super phosphate (tsp), potassium chloride (mop), diammonium phosphate (dap), sulphate of potash (sop), commercial epsom salt (ces), melamine, urea melamine formaldehyde, urea formaldehyde concentrate 85%, para formaldehyde 96%., iron ore.General trading in raw materials, supply chain, contracting.

GOLD Member

Jan-20-23

Epoxy Primer -Guard Primer

MOQ: MOQ: Not Specified

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Epoxy Primer -guard Primer Is 2 Component Paint System For Interior Walls

2333 104 Epoxy Redoxide Zinc Phosphate Primer Suppliers

Short on time? Let 104 Epoxy Redoxide Zinc Phosphate Primer sellers contact you.

GOLD Member

Sep-24-20

Phnx International Limited

Supplier From Kington, United Kingdom

Plant food products : sugar, wheat, corn. soybeans, rice
animal food products : chicken, chicken feet, chicken paws, beef, pork.
Fertilizers: urea 46, nitrogen, phosphate, potassium
mineral ores : iron, copper, manganese, zinc..

GOLD Member

Jan-20-23

Textile Epoxy Primer

MOQ: MOQ: Not Specified

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Textile Epoxy Primer

GOLD Member

Jan-21-23

Epoxy Zinc Chromate Primer

MOQ: MOQ: Not Specified

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Epoxy Zinc Chromate Primer

GOLD Member

Jan-21-23

Epoxy Zinc Rich Primer

MOQ: MOQ: Not Specified

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Epoxy Zinc Rich Primer

GOLD Member

Jan-19-21

Goods Exim International

Supplier From Dubai, India

Car paint, paint, paints coatings, wood coatings, epoxy, wood stainer, chemicals solvents, resin, white sprits non metallic minerals, dolomites, pigments, paint pigments, pigmnets for leather, pigments for textiles, pigments for metals, pigments for plastics, pigments for inks, wall putty, all types of virgin papers for all industries, kraft papers, color papers,etc, fork lifts, auto paint, epoxy floor paint, pu wood polish, nc sanding, emulsion paint, pva primer, washable silk paint, weather guard paint, eggshell paint.

Apr-06-23

101 Epoxy Zinc Phosphate Primer Grey

Ask for price

MOQ: MOQ: Not Specified

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Primer Paint

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Primer Paint

Description

Two component Epoxy based anti corrosive primer pigmented with Zinc Chromate as corrosion inhibiting pigments.

Recommended Use :-
It is recommended as primer on M.S surface for original equipment manufacturing as well as for process industry as in various fertilizer, refineries, petrochemical, chemical and other plants, applied in diverse areas of tank exteriors, equipments, pipelines, structural steel, etc. Not to be used for immersion application.

Physical Data
COLOUR : Assorted
FINISH : Matt
SOLIDS BY VOLUME : 40 Â± 3%
THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at recommended DFT of 30 Ã?Âµ
FLASH POINT : Base : Above 23Ã?Â°C Hardener : Above 23Ã?Â°C
DRYING CHARACTERISTICS : SURFACE DRY : 60 90 minutes
(At 65% Relative Humidity & at 30Ã?Â°C) : HARD DRY : Overnight FULL CURE : 7 days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application.

Application Data
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray
THINNER : Epoxy thinner 190
POT LIFE : 4 hours min at 30 C
RECOMMENDED DFT : 30 - 40 au.
OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours
COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous topcoats.
Application Method
Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipments used for above should be properly cleaned.

Application :- By Brush / By Conventional Spray / By Airless Spray

Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in criss-cross manner and ensure the uniform application. Use quality brushes for paint application

For Conventional Spray application :-
Thinner : Epoxy Thinner 190
Addition : 10-15%
Nozzle Orifice : 1.2 -1.4 mm
Nozzle Pressure : 40-70 psi
For Airless Spray application :-
Thinner : Epoxy Thinner 190
Addition : 10-15%
Addition : Max 5% if required
Nozzle Orifice : 0.37- 0.42mm
Nozzle Pressure : 1400-1800 psi

GOLD Member

Jan-21-23

Synthetic Zinc Phosphate Primer

MOQ: MOQ: Not Specified

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Goods Exim International

Supplier From Dubai, India

Supplier Of Paints & Coatings

Synthetic Zinc Phosphate Primer

GOLD Member

Apr-07-25

Tweed Grey Primer, Dubai Grade

$1 - $2 / Liter (EXW)

MOQ: MOQ: 20 Pieces

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Tweed Grey Primer -super Strength For Cement

GOLD Member

Apr-07-25

Synthetic Red Oxide Primer, Dubai Grade

$1 - $2 / Liter (EXW)

MOQ: MOQ: 20 Pieces

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Synthetic Red Oxide Primer
Ritver Synthetic Red Oxide Primer Commercial is based on Alkyd resin containing anticorrosive pigments. It is used as a primer coat for many applications especially for protecting the metals and other steel structures against corrosion and is quite versatile. It forms a firm base with good adhesion for Ritver Topcoat Enamels and Ritver Quick Drying Enamels.

GOLD Member

Apr-07-25

Plastic Primer For Auto Bumper, Dubai Grade

$1 - $2 / Liter (FOB)

MOQ: MOQ: Not Specified

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

Goods Exim International

Supplier From Dubai, India

Supplier Of Primer Paint

ARP326
PLASTIC PRIMER
A transparent single component primer that promotes adhesion of subsequent coats of paint on most plastic substrates particularly those used in automotive.

May-29-23

Brighto Epoxy Zinc Chromate Primer

(2.1)

Ask for price

MOQ: MOQ: Not Specified

Brighto Paints Pvt. Ltd

Supplier From Ras Al Khaima, UAE, United Arab Emirates

Supplier Of Primer Paint

Brighto Paints Pvt. Ltd

Supplier From Ras Al Khaima, UAE, United Arab Emirates

Supplier Of Primer Paint

Brighto Epoxy Zinc Chromate Primer

Price :
3.60 Ltr -USD 29.7
18 Ltr- USD 112.4

Apr-06-23

Epoxy Zinc Rich Primer

Ask for price

MOQ: MOQ: Not Specified

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Primer Paint

Saffro Mellow Coatings And Resins

Supplier From Navagam, Gujarat, India

Supplier Of Primer Paint

Description

Two component metallic zinc rich epoxy high performance primer.

Recommended Use :-
The zinc pigment in dry film renders excellent protection to steel structure, tanks, bullets, dam gates, pipelines, plant equipments, jetty, etc. in both interior and exterior exposed conditions of fertilizer units, chemical plants, steel plants, cement plants, pulp and paper industries, ports, power plants, petrochemical and pharmaceutical industry, transformer, machines & other heavy duty OEMs. It also provides cathodic protection to steel and gives good resistance to corrosion at local damaged areas. It is useful in heavy-duty protective paint systems. It is recommended not to expose the primed coat alone to chemical and saline atmosphere for a long time.

Physical Data
COLOUR : Grey
FINISH : Matt
SOLIDS BY VOLUME : 50 Ã?Â± 3%
THEORETICAL SPREADING RATE : 10 sq.mt / ltr at DFT of 50 Ã?Âµ
FLASH POINT : Base : Above 23Ã?Â°C Hardener : Above 23Ã?Â°C
DRYING CHARACTERISTICS (at 30Ã?Â°C & at 65% Relative Humidity) : HARD DRY : Overnight FULL CURE : 7 days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
Abrasive blasting to minimum Sa 2 1/2 Standards is recommended with a profile of 35 - 75 microns. The surface should be absolutely dry and salt free before application. The primer should be applied preferably immediately or within 4 hours of blasting.

Application Data :-
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray / By Airless Spray
THINNER : Epoxy Thinner 190
POT LIFE : 4 hours min at 30Ã?Â°C
RECOMMENDED DFT : 30 50 Âµ.
OVERCOATING INTERVAL : MIN : 8 hours MAX : Infinite
COMPATIBILITY : Compatible with Epoxy, PU, Chlorinated Rubber intermediate/finish coat.

GOLD Member

Jan-05-21

Original Aptamil Milk Powder

(4.7)

MOQ: MOQ: Not Specified

Soupin Jean Stephane

Supplier From Saint-Paul, France

Supplier Of Milk Powder

Soupin Jean Stephane

Supplier From Saint-Paul, France

Supplier Of Milk Powder

Ingredients
Skimmed milk Lactose (from milk) Vegetable oils (Palm oil Sunflower oil Rapeseed oil)
Galacto-oligosaccharides (GOS) (from milk) Whey products (Demineralised whey powder Whey protein
concentrate) (from milk) Maltodextrin Calcium phosphate Potassium hydrogen phosphate
Fructo-oligosaccharides (FOS) Fish oil Magnesium citrate Calcium carbonate Milk flavouring
Vitamin C Emulsifer (soy lecithin) Ferrous sulphate Zinc sulphate Vitamin E Vitamin D3 Pantothenic
acid Vitamin B12 Folic acid Riboflavin Nicotinamide Vitamin A Biotin Vitamin B6 Thiamin Potassium
iodide Vitamin K1

Aptamil 1 mit pronutra (800 Gramm) EAN number: 4008976022329 ( 1X 800 Grams Unit) (Carton have 4 X 800 Grams units)
Aptamil 2 mit pronutra (800 Gramm) EAN number: 4008976022336( 1X 800 Grams Unit) (Carton have 4 X 800 Grams units)

Aptamil 3 mit pronutra(800 Gramm) EAN number: 4008976022343( 1X 800 Grams Unit) (Carton have 4 X 800 Grams units)

Aptamil 1+ mit pronutra EAN number 4008976022305 (1 X 600 grams) ( Carton have 5 X 600 Grams units)

Aptamil 2+ mit Pronutra EAN number 4008976022312 (1 X 600 grams) ( Carton have 5 X 600 Grams units)

GOLD Member

May-25-22

Refined White Sugar Icumsa 45

$420

MOQ: MOQ: 12500 Metric Tonnes

Phnx International Limited

Supplier From Kington, United Kingdom

Supplier Of Sugar

Phnx International Limited

Supplier From Kington, United Kingdom

Supplier Of Sugar

High quality Thai ICUMSA-45 Sugar has a sparkling white color and is suitable for a wide range of food applications. It is the safest form of Sugar thanks to its refining process, which removes all of the bacteria and contaminants often present in raw sugars.

Terms:
CIF USD 420+ / mt depending on the qty
ITLC / SBLC / TT from a major international bank

Shipments:
MOQ 12,500 mt
Average 4 weeks to first shipment, monthly after that depending on the order volume.

Inspection:
SGS/TUV/Intertek Inspection and loading supervision is available at buyer's expense

Specifications:
Standard Shipping Export Quality
Fit For Human Consumption
Product: Icumsa 45 Refined Sugar
Granulation: Crystal Sparkling White
MOISTURE: 0.04% MAX
POLARIZATION: 99.8 MIN
SOLUBILITY: 100%
TASTE: NATURAL
SMELL: NATURAL
COLOR: 45 ICUMSA UNITS MAX
INVERT SUGAR: 0.04% MAX
SUGAR REDUCTION: 0.05% MAX
CONDUCTIVITY ASH: 0.04% MAX
CONTAMINANTS (mg): 0.5 MAX
SALMONELLA: ABSENT
YEAST AND MOLD: 20cfu/10g MAX
SULPHUR DIOXIDE: 20mg/Kg MIN
RADIATION INSIDE CS-137 of 50 BQ per KG
MAGNETIC PARTICLES: mg/Kg 4 MAX
PNH STAPHYLOCOCCUS: NIL
AS 1 P.P.M. MAX
PB 1 P.P.M. MAX
CU 3 P.P.M. MAX

GOLD Member

Nov-10-23

Urea 46 Nitrogen Fertilizer