Gtake brand inverter are good alternative ABB'S ACS550 AND ACS800, the features below:
1.Adopt ti's dsp, and infineon's 4th generation igbt module.
2.Two expansion ports for pg cards for ABZ , UVW, resolver encoder.
3.Thick three-proofing lacquer coated for bad working condition.
4.Main and auxiliary settings and switch over.
5.V/f separated control mode, the output voltage and frequency can be set separately. It's helpful for the variable frequency power supply and torque motor application.
6.Parameter copying(upload and download) function
7.Two sets of motor parameters could be configured, easily run two motor alternately by the control panel.
8. Under vector control with pg, running zero-servo, main axis position control, feed-forward control, pulse serial position control and other position control.
9.Torque control upon the open-loop vector mode and the close-loop vector mode
10.Used for induction motor, servo motor, pmsm and industry particular motor
11.Pg feedback mode: ABZ encoder, uvw encoder, resolver
12.Servo control: main axis orientation control, simple feed forward control, pulse train position control
13.Load distribution function
Gk600 technical specifications
Rated voltage 3-phase ac380v/ac400v/ac415v/ac440v/ac460v/ac480v
Frequency 50hz/60hz, fluctuation range5%
Allowable range of voltage Continuous voltage fluctuation 10%, short fluctuation -15%~+10%, i.E. 323v~528v;
Voltage out-of-balance rate
--Program Memory
16Mbit flash memory (expanded to 512Mbit).
--Run Extensity
64Mbit SDRAM (expanded to 128Mbit).
--Data Memory
4Mbit SRAM (expanded to 16Mbit).
--Display
128 x 64 pixels and EL backlightKey
11 numeric keys and 8 functional keys.
--Magnetic Card Reader
Accords with GB/T15120 (ISO7811) standards
Magnetic stripe 2/3, 1/2 or 1/2/3.
--IC Card Reader/writer
Accords with GB/T16649 (ISO7816) Standards and EMV2000
1 user card, 1 merchant card. Async/Sync T=0/T=1, support synchronization.
--PSAM
3 SIMS, Accords with ISO7816 standards and EMV2000.
--Communication
Accord with CCITT V.22 bis/BELL 212A Internal Modem
Support Async /Sync communication ISO8583/VISA I/II ETHERNET, TCP/IP, GSM, GPRS.
--External Port
RS232, 1 I 2 C BUS, 1 ETHERNET Printer
Thermal line printer, printer width 57.5mm, speed 2.5 rows/s.
Glue spreader is used for spreading glue Uniformly on veneers. Uniform gluing with the exact figure of adhesives improves the quality of plywood and saves a huge amount of expense in the long run. The clearance between the glue rolls and the doctor roll, in which a stepless change in rotation is available, can be freely adjusted according to the viscosity and the amount of glue to be spread. The waste scrapes the glue roll. When it inserts to the clearance either between the glue rolls; or between the glue roll and the doctor roll, the rolls are separate quickly by air cylinder. So, the wastefall down and cannot scrape the glue roll. This Machine has VFD (Vector Frequency Drive). It can control stability of the running motor and the horse power of the output. At the operation the exchanged velocity, it can adjust easily the needed gluing velocity according to the actual gluing situation. (Nonstep speed change).Besides, this machine is specially equipped with an emergency stop switch which can immediately stop the running machine in emergency conditions. The operator can activate the emergency stop switch within a very short time to ensure the safety of the operator.
Main Rubber Rolls 400 mm Dia x 2700 mm Length x 2 Sets
Doctor Rolls 250 mm Dia x 2700 mm Length x 2 Sets
Clearance Between Rubber Rolls 0 70 by handle.
Adjustment of Doctor Rolls One Touch Controlled by Pneumatic System &
Fine adjustment by handle with revolution
indicator.
Motor for Outfeed Conveyor 0.75 Kw (1 H.P.) with VFD.
Motor for Main Roller Drives 7.5 Kw (10 H.P.) with VFD & Imported Gearbox.
Power input Rated voltage 3-phase AC220V/AC230V/AC380V/AC400V/AC415V/AC440V/AC460V/AC480V
1-phase
AC220V/AC230V
Rated input current See Section 2.3 in user manual
Frequency 50Hz/60Hz, acceptable fluctuation range ¡¨¤5%
Allowable range of voltage Continuous voltage fluctuation ¡¨¤10%, short fluctuation -15%~+10%, i.e. 323V~528V;
Voltage out-of-balance rate <3%, distortion rate as per the requirements of IEC61800-2
Power output Standard applicable motor (kW) See Section 2.3 in user manual
Rated current (A) See Section 2.3 in user manual
Output voltage (V) 3-phase: 0~ rated input voltage, Bias < ¡¨¤3%
Output frequency (Hz) 0.00~ 600.00Hz; unit: 0.01Hz
Overload capacity 150% - 1min; 180% - 10s; 200% - 0.5s once per 10 minutes
Operation characteristics Control mode V/f control
Sensor-less vector control without PG 1
Sensor-less vector control without PG 2
Range of speed regulation 1:100 ( V/f control, sensor-less vector control without PG 1)
1:200 (sensor-less vector control without PG 2)
Speed accuracy ¡¨¤0.5% (V/f control)
¡¨¤0.2% (sensor-less vector control without PG 1 & 2)
Speed fluctuation ¡¨¤0.3% (sensor-less vector control without PG 1 & 2)
Torque response < 10ms (sensor-less vector control without PG 1 & 2)
Starting torque 0.5Hz: 180% (V/f control, sensor-less vector control without PG 1)
0.25Hz: 180% (sensor-less vector control without PG 2)
Basic functions Start frequency 0.00~ 600.00Hz
Acceleration/deceleration time 0.00~60000s
Carrier frequency 0.7kHz~16kHz
Frequency command source Digital command + operating panel ¡Ä/¡Å
Digital command + terminal UP/DOWN
Communication
Analog command (AI1/AI2/EAI)
Terminal pulse command
Motor Started method Started from starting frequency
DC braking and then started
Speed search then started smoothly
Motor Stopped method Ramp to stop
Coast to stop
Ramp stop + DC brake
Basic functions Dynamic brake capacity Brake unit action voltage: 650V~750V; service time: 0.0~100.0s; brake unit for GK600-4T45G/55L or below could be internally mounted
DC brake capacity DC brake start frequency: 0.00~600.00Hz
DC brake current: 0.0~100.0%
DC brake time: 0.0~30.00s
Input terminals Six digital input terminals (can be extended to 7), one of which can be used for high-speed pulse input. Compatible with active open collectors NPN, PNP and dry contact input
Two analog input terminals, one of which is voltage/current programmable, and the other is voltage only (can be extended to 3; extension terminal is voltage/current programmable)
Output terminal One high-speed pulse output terminal, 0~50kHz square wave signal output; can output signals such as setting frequency and output frequency. etc
One digital output terminal
One relay output terminal (can be extended to 2)
One analog output terminal (can be extended to 2), voltage/current output optional; can output signals such as setting frequency and output frequency, etc
Characteristics Parameter copy, parameter backup, common DC bus, free switching between two motors¡¡¥ parameters, flexible function code displayed & hidden, various main & auxiliary command and switchover, speed searching, a variety of acceleration/deceleration curves optional, automatic correction of analog value, mechanical brake control, 16-step speed control programmable (2-step speed supports flexible frequency command), swing frequency control programmable, fixed-length control, counting function, three faults recorded, over excitation braking, over voltage stall prevention, under voltage stall prevention, restart upon power off, hopping frequency, frequency binding, free switching between four sections of acceleration/deceleration time, motor thermal protection, flexible fan control, process PID control, simple PLC, flexible multi-functional key setting, droop control, parameter identification, weak magnetic control, high-precision torque restraint, V/f separated control
Protection function Refer to Chapter VII - Fault Diagnosis and Abnormity Handling
Environment Place of operation Indoors, no direct sunlight, free from dust, corrosive gases, flammable gases, oil mist, water vapor, water drip or salt content etc.
Altitude 0~2000m
Derating is required where altitude is more than 1,000m; each increase of 100m in height corresponds to a decrease in rated output current by 1%
Ambient temperature -10¡ãC~50¡ãC
Humidity 5~95%, condensation not allowed
Vibration Less than 5.9m/s2 (0.6g)
Storage temperature -40¡ãC~+70¡ãC
Others
Efficiency Rated power
7.5kW and below: ¡Y93%
11~ 45kW: ¡Y 95% 55kW and higher: ¡Y98%
Installation mode Wall-mounted
Protection level IP20
Cooling mode Forced air cooling
Country of Origin: China (Mainland) Guangdong
Brand: GTAKE
Model: as type
Output power: other
0.4KW-800KW
Output type: Triple
Size: as model
Weight: as model
Input voltage :208V/220V/230V/380V/400V/415V/440V/460V/480V
Output: 0-rated input voltage
Type: AC/AC, or DC/AC inverters
Output frequency: 0.00-600.00Hz
Output current: as model
Input terminals: DI-7(HDI-1), AI-3 0~10V, or 0-20mA
Output terminals: DO-2(HDO-1), RO-2, AO-2
Certificate: CE, GOST
Applying motor: Asynchronous motor and synchronous motor
Cooling: Air cooling
IP grade: IP20
Input voltage: AC, or DC
Frequency command source:Keypad, terminals, communication
Communication: Modbus, Profibus-DP, CANopen, CAN
Control technique: V/f, SVC1, SVC2
Arbitrary Waveform Generators
TFG1900A
With Direct Digital Synthesis (DDS) technology, the TFG1900A Series Function/Arbitrary Waveform Generators are of the high performance indexes and rich function characteristics which are necessary for the fast completion of measuring. The clear and bright VFD fluorescent display interface is convenient for the users to operate and observe.
Features
Economic and Light weight
Dual output with same characteristic
1μHz frequency resolution
11 built in waveforms and 5 user-defined arbitrary waveforms
AM, FM, PM, PWM, FSK modulation, frequency sweep and burst function
Built in 100MHz frequency counter
Arbitrary Waveform Editing PC Software
USB Host, USB Device
ET1000 SERIES General-purpose frequency inverter
220V( single phase power) 0.4-2.2 kw
220V(three phase power)0.4-75kw
380V(three phase power)0.75-1000kw .
V/F control mode brings the same feeling as vector inverter control
1, Low output harmonic prolongs lifetime of motor.
2, Auto-adjust carrier frequency according to module temperature to adapt the environment.
3, Super low carrier frequency technology effectively reduces inverter output current leak.
4, Flexible multi-steps V/F control mode.
5, Perfect auto-improve torque function. Auto- supply super startup torque function.
The most strong environment adaptability.
1. Wide voltage range and voltage modulation technique ensure the carry capacity. Functions as anti-surge (thunder induction), anti-noise and static resistance have reached strict industrial standard.
2. All standard products are processed with three “proof” lacquer to stand in occasions with high humidity and where the rate of dust exceed standard. More strict treatment will be adopted for more strong protection function to work in worse environment.
3. All series products adopt independent cooling channel designing. Middle or high power inverters adopt hermetic style designing to work in worse environment.
Instant break protection and no stop function
It will use motor reborn energy while meeting instant power break. The inverter will continue to work while power on again.
(Take air condition energy saver or fan as example as below)
Perfect functions; wide using range
Wobble: Used in occasions where needs wobble control mode, such as textile, fabric.
According to the parameters, freely set the range, speed, frequency.
Wobble output frequency
Strong communication function
Master-slave communication is based on international standard ModBus communication protocol.
Centralized control is carried out via PC/PLC, upper machine and master inverter (By set control order, running frequency, corresponding parameters modification, monitoring of the running state and malfunction information) to satisfy the specific requirement.
Simple PLC. Up to 15 steps speed control
Above 160kw standard DC reactor adaptor
Above 160kw standards DC reactor brings super low input harmonic and supper high input power factor to protect the power grid very carefully.
Universal DC master line technology
More energy saved; Better environment protect function; More economical.
Rich of terminal function
Outside terminalVS1: 0-10v, outside terminal VS2:-10V—10V.
Outside terminal AS:4—20Ma, RS485, frequency pulse input;
Other functions includes startup, stop, positive turn and reverse, jog, multi-steps speed, free stop, reset, choice of acceleration time and deceleration time, frequency setting channel choice, alarm for outside malfunction; relay output, collector output, 1-10v output, 4-20mA output, frequency pulse output and so.
Quick and stable PID control function
Multi PID control modes: common PID and PID special for press closed-loop. Wider using range and more customized.
VEICHI provides OEM/ODM Service for TOP Customers.
The AC310 series inverter is a product continuously developed on the new high-performance vector technology platform of VEICHI. It adopts field-oriented vector control technology to be compatible with synchronous and asynchronous motor control.
Product Advantages
1. High-performance vector universal platform and brand new motor control algorithm.
2. Synchronous and asynchronous drives are integrated, open-loop and closed-loop are comprehensive.
3. Accurate torque excitation decoupling and excellent dynamic response performance.
4. The entire series of book-based design saves installation space to the greatest extent.
5. Comprehensive thermal simulation design to ensure the rationality of hardware arrangement.
6. AC310 series innovative grounding method can quickly solve the problem of electromagnetic interference.
7. Software and hardware modular design requirements and powerful expansion capabilities.
Applicationsï¼?
Fans and pumps, wire drawing machines, injection molding machines, ball mills, machine tools, air compressors, belt conveyors, industrial washing machines, lifting industries, and other industries and equipment.
VEICHI provides OEM/ODM Service for TOP Customers.
The SD650 electro-hydraulic servo driver enables the output of the system to change automatically, quickly, and accurately following the change of the input. Moreover, the output power is greatly amplified, and the electro-hydraulic servo system integrates the advantages of both electric and hydraulic.
Product Advantagesï¼?
1. Built-in brake unit, safety comes with you.
2. Strong overload capacity, stable under high load conditions.
3. Forced air cooling, intelligent temperature control, cooling to the end.
4. A variety of protection functions escort VEICHI electro-hydraulic drives.
5. AC220V/380V/480V multiple types to choose from, adapt to a variety of electrical environments.
6. Pressure and flow double closed loop, vector weakening PID, fast response, and accurate control coexist.
7. Built-in CAN, RS485 multiple communication, easy to achieve multi-pump fusion.
8. Dark gray metal shell, external terminal panel, set convenience, safety, and beauty in one.
Applicationsï¼?
Machine tools, metallurgy, construction machinery, agricultural machinery, automobile industry, textile industry, etc.
The output voltage: Output under rated conditions: 3-phase, 0~input voltage, error less than 5%
Output frequency range: Maximum output frequency: 320HZ
VEICHI provides OEM/ODM Service for TOP Customers.
AC310-XL special frequency converter for cable industry is a product continuously developed on the high-performance vector technology platform of VEICHI. It adopts field-oriented vector control technology, compatible with asynchronous and synchronous motor control. Moreover, under the premise of high performance and high reliability, the components are arranged reasonably to realize the book-style narrow body design. The design has strengthened customer ease of use and industry professionalism, and is equipped with a wealth of expansion interfaces.
Product Advantages
1. Narrow book design, beautiful, convenient, and space-saving installation cabinet.
2. Independent air duct design, the fan can be disassembled freely, and the heat dissipation is good.
3. The PCB is all thickened with three anti-paint treatment, which is more reliable.
4. High seismic design, easy to deal with the vibration of the wire drawing machine.
5. Abundant expansion capabilities, IO card, communication card, GPRS, PG card, etc.
6. Can be applied to a variety of cable equipment.
Applications
Water tank wire drawing machine, straight wire drawing machine, pulley type wire drawing machine, non-swing rod wire drawing machine, power pay-off, tension frame winding, etc.
Main parameter of VC610 2.2kw CNC lathe spindle drive VFD inverter :
Item: VC610-4T0022G
Control style: Vector
Matched motor power: 2.2kw
Input frequency and voltage: 380~440V,50/60Hz
Output frequency: 0.00~650.00Hz
Output voltage:0~input voltage
Rated output current: 5.5A
Guarantee: 3 years
Product Structure
Sinopak MVVFD includes integrated structure and split-type structure based on capacity. The integrated structure is adopted in low capacity MV VFD and the split-type structure is adopted in high capacity MV VFD. In terms of an integrated machine, which is compact in size, phase-transformer, power units, control systems, and power frequency bypass are fully integrated into one cabinet; In terms of a split-type machine, phase-transformer, power units, control systems and power frequency bypass are assembled in separate cabinets in which are combined on the spot.
Technical Parameters
Medium voltage input
3KV, 3.3KV, 4.16KV, 6KV, 6.6KV, 10KV, 11KV (-20%~+15%)
50/60 Hz±10%
Medium voltage output
0~Rated voltage
0~50/60 Hz, 0.01 Hz
Multilevel PWM sin wave, total harmonic distortion (THD) < 4%
Performance
Inversion efficiency at an rated load > 98.5%,
overall efficiency (including the transformer) > 97%
Power factor (within the range of speed regulation) > 0.95,
power factor (at a rated load) > 0.97
Overload capacity: 110%: long-term stable operation, 120%: 1 minute, 150%: 2 seconds, and 160%: prompt protection
Allowable outage duration: 200 ms (and longer under light load)
Mean time between failures: > 100,000 hours
Control mode: flux optimization and control with space vector PWM
Acceleration/deceleration time: 1 to 3,600 seconds
Switching quantity input/output:11-way/10-way
Analog input: 4-way (optional: 0 to 5 V, 4 to 20 mA)
Analog output: 3-way (optional: 0 to 10 V, 4 to 20 mA )
Communications: RS485 interface, Modbus-based (optional Profibus-DP and Ethernet interfaces)
Control power supply: Single-phase 220 V AC, 5kVA
Excitation control ( dedicated for the synchronous motor)
Automatic excitation control, manual excitation control, multi-stage speed excitation control, and external excitation control for the MVVFD
Environment: Operating in indoor environment without explosive or corrosive gases, conductive dust, or oil fog
Operating ambient temperature: 0 degree~+45 degree
Storage and transportation temperature: -40 degree ~+70 degree
Ambient humidity: < 90% (No condensation)
Operating altitude: Derating required for an altitude greater than 1000 meters
Protection function: Overcurrent, overload, short circuit, three phase current unbalance, immediate electric outage, input/output phase loss, overvoltage, undervoltage, body overheat, transformer overheat, shutdown due to external fault, and power unit auto bypass
Cooling mode: Forced-air cooling
User interface: An 10-inch Human Machine Interface
Protection grade: IP31
Product Structure
Sinopak MVVFD includes integrated structure and split-type structure based on capacity. The integrated structure is adopted in low capacity MV VFD and the split-type structure is adopted in high capacity MV VFD. In terms of an integrated machine, which is compact in size, phase-transformer, power units, control systems, and power frequency bypass are fully integrated into one cabinet; In terms of a split-type machine, phase-transformer, power units, control systems and power frequency bypass are assembled in separate cabinets in which are combined on the spot.
Technical Parameters
Medium voltage input
3KV, 3.3KV, 4.16KV, 6KV, 6.6KV, 10KV, 11KV (-20%~+15%)
50/60 Hz±10%
Medium voltage output
0~Rated voltage
0~50/60 Hz, 0.01 Hz
Multilevel PWM sin wave, total harmonic distortion (THD) < 4%
Performance
Inversion efficiency at an rated load > 98.5%,
overall efficiency (including the transformer) > 97%
Power factor (within the range of speed regulation) > 0.95,
power factor (at a rated load) > 0.97
Overload capacity: 110%: long-term stable operation, 120%: 1 minute, 150%: 2 seconds, and 160%: prompt protection
Allowable outage duration: 200 ms (and longer under light load)
Mean time between failures: > 100,000 hours
Control mode: flux optimization and control with space vector PWM
Acceleration/deceleration time: 1 to 3,600 seconds
Switching quantity input/output:11-way/10-way
Analog input: 4-way (optional: 0 to 5 V, 4 to 20 mA)
Analog output: 3-way (optional: 0 to 10 V, 4 to 20 mA )
Communications: RS485 interface, Modbus-based (optional Profibus-DP and Ethernet interfaces)
Control power supply: Single-phase 220 V AC, 5kVA
Excitation control ( dedicated for the synchronous motor)
Automatic excitation control, manual excitation control, multi-stage speed excitation control, and external excitation control for the MVVFD
Environment: Operating in indoor environment without explosive or corrosive gases, conductive dust, or oil fog
Operating ambient temperature: 0 degree~+45 degree
Storage and transportation temperature: -40 degree ~+70 degree
Ambient humidity: < 90% (No condensation)
Operating altitude: Derating required for an altitude greater than 1000 meters
Protection function: Overcurrent, overload, short circuit, three phase current unbalance, immediate electric outage, input/output phase loss, overvoltage, undervoltage, body overheat, transformer overheat, shutdown due to external fault, and power unit auto bypass
Cooling mode: Forced-air cooling
User interface: An 10-inch Human Machine Interface
Protection grade: IP31
INTRODUCTION
The instrument is a precision AC energy meter testing instrument, mainly used to test three phase energy meter error on site and measure various of AC parameters.
TECHNICAL SPECIFICATIONS
Electrical parameters
Accuracy class 0.05%, 0.1%
Resolution 6 TFT (640-480)
Power supply 220V±10%, 50/60Hz
Li-polymer battery (size (mm): 110x51x16, nominal output voltage: 7.2V, capacity: 5000mAh)
Power line supply (U1, UN), 85V-265V 50/60Hz
Communication port RS232
Test voltage
Range 5-480V
Error ±0.05% (30V-480V)
±0.1% (5V-30V)
Harmonic 2nd-63st
Test current
Range (direct connection) 5mA-20A
Error (direct connection) ±0.05% (100mA-20A)
±0.1% (10mA-100mA)
Range (clamp CT) 10mA-3000A
Error (camp CT) ±0.2% (100mA-100A)
±0.5% (100A-3000A)
Harmonic 2nd-63st
Power measure error
Active power (direct connection) ±0.05% (0.1A-20A)
±0.1% (0.01A-0.1A)
Reactive power (direct connection) ±0.1% (0.1A-20A)
Energy measure error
Active energy (direct connection) ±0.05% (0.1A-20A)
±0.1% (0.01A-0.1A)
Reactive energy (direct connection) ±0.1% (0.1A-20A)
Phase angle
Range 0-360
Resolution 0.01
Error ±0.05
Frequency
Range 45-65Hz
Resolution 0.001Hz
Error 0.002Hz
Pulse input
Input channel 2
Input level 5-24V
Input frequency Max. 2MHz
Pulse output
Energy constant 180000imp/kWh, 1800imp/kWh, 180imp/kWh
Pulse ratio 1:1
Output level 5V
Function
Vector diagram Yes
Waveform Yes
Energy accumulation Yes
Communication with PC Yes
Mechanical parameters
Instrument dimensions (WHD) (mm) 220-13861
Instrument Weight (kg) 1.7
Carry case dimensions (WHD) (mm) 450-320185
Carry case (kg) 8.5
Environmental conditions
Ambient temperature -10C to 55C
Relative humidity 15%-85%
Loitha AHY Series Dry Oil-Free Screw Air Compressor provides 100% oil-free, pure and high-quality compressed air for manufacturers. Professional oil-free screw technology and excellent system structure design capabilities ensure long-lasting, safe and reliable equip-ment with outstanding performance.
CORE TECHNOLOGY
PM VFD MOTOR
Using neodymium iron boron magnetic material, can withstand high tempep-ture of 180�°C.
Protection class IP55, insulation class F.
Large starting torque, wide debugging range, compact structure, light weight and small size.
The motor has a built-in PTC to provide comprehensive overheat and overload protection.
INTAKE SILENCER SYSTEM
The specially designed air filter intake channel greatly reduces the unloading noise of the intake air and intake valve.
The unique structure of the air filter box ensures air intake while greatly reduc-ing the noise, transmission to the out-side of the machine.
OIL-FREE SCREW HOST
The air end is composed of a combina-tion of low-pressure stage body and high-pressure stage body: the two-stage air end is driven by the same motor, the air end has its own variable speed gear-box, the exhaust pressure of the first stage is about 2.2bar, and the com-pressed air enters the secondary air end through the intercooler to continue compression.
Two pairs of stainless steel rotors with excellent durability.
The protective coating also ensures pre-cise meshing of the rotor.
VECTOR FREQUENCY CONVERTER
Adopt the accurate vector control tech-nology, so that the unit can obtain the appropriate torque to drive the air com-pressor smoothly under the condition that the temperature rise of the motor is smaller in the wide speed range of the machine.
Special inverter protection cabinet, high protection level, stable performance.
High-precision constant pressure con-trol with pressure fluctuation amplitude �±0.01Mpa or less can be carried out, so as to effectively provide the most suita-ble pressure air required for the use of the machine.
In addition, the accuracy of setting pres-sure is 0.01Mpa, and the precise setting realizes maximum energy saving.
OIL MIST RECOVERY
Equipped with oil mist recovery system to recover gearbox oil mist vapor
MAIN CONTROLLER
Dry oil-free special controller, standard cloud service system, convenient to in-tuitively understand the equipment op-erating status, easy to achieve data que-ry, statistics and other functions.
CLASS 0 OIL-FREE AIR
Always strive to pursue cutting-edge technology to meet the needs of customers. Through continuous research and development, Loitha compressor have true oil-free compression technology, and the new product has obtained CLASS 0 certification.
