The product is manufactured according to the standard of GB14049”Aerial insulated cables of rated voltages 10KV and 35KV” and IEC60502”Extruded solid dielectric power cables for rated voltage form 1KV to 30KV”.
Operating characteristic
Rated voltage: 10KV 35KV
Max.permissible continuous temperature:
HDPE insulated aerial cables :75du.
XLPE insulated aerial cables: 90du.
Max.short-circuit temperature of the conductor should not exceed:
HDPE insulated aerial cables :150du.
XLPE insulated aerial cables: 250du.
The installation ambient temperature should no below: -20du.
The bending radius of cables are recommend as follows:
Single cable:not less than 20 times the diameter of cables;
Multi-core cable:not less than 15 times the diameter of cables.
Packaging & Shipping
In coils, wooden drums, steel drums or steel-wooden drums.
We could producing according to the customers' requirements.
The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction.
The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors.
2.Standard :
NFC33-209,BS7870,GB/T12527-2008
3.Rated voltage :
1kV,10kV or 11kV
4.Specification
Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Application
Use for control and connecting cable on data transmission within building management system, speaker audio system and control measurement. Suitable for use in dry and damp environment.
Cable Structure & Features
Conductor Material : Tinned copper stranded
Insulation : Semi-Rigid PVC
Drain Wire : Tinned copper stranded
Shielding : Aluminium foil laminated screen
Outer Sheath ; PVC
Sheath Colour : black or gray
Technical Data
Standard : UL Style 2464
Approvals : UL apporoved
Rated Voltage : 300V
Testing Voltage : 1500V
Flame Retardant : VW-1
Insulation Resistance : Min 20Mx km
Min. Bending Radius : 10 x cable diameter
Operating Temp. : -30C / +80C
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Our advantage: 1. We offer the most competitive prices. 2. We provide relevant professional product consulting. 3. We are willing to help customers find any potential products and merchandise. 4. You can visit our factory by yourself. Our success is inseparable from your support and making friends from all over the world in good faith. 5. Our aim is: integrity first; reputation first, best reputation; once cooperation, friends for a lifetime.
For more information about our product, please feel free to contact us.
The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction.
The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors.
2.Standard :
NFC33-209,BS7870,GB/T12527-2008
3.Rated voltage :
1kV,10kV or 11kV
4.Specification
Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction.
The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors.
2.Standard :
NFC33-209,BS7870,GB/T12527-2008
3.Rated voltage :
1kV,10kV or 11kV
4.Specification
Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
Outfitted with the latest generation of technologies, facilities and equipments. Jinshui Wire & Cable Group can produce more than 1400 types of cables and wires in scores of categories. We mainly have the following quality products with strong international competitiveness: aluminum rod for electrical purpose, hard drawn copper conductor, all aluminum conductors (AAC), aluminum conductors steel reinforcement (ACSR), all aluminum alloy conductors (AAAC), aerial bundled cables up to 1kV (ABC), PVC insulated wire and flexible wire, welding cable, control cable, rubber insulated cable, rubber insulated flexible wire, PVC insulated power cable, XLPE insulated power cable up to 220kV and cable accessories.
The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction.
The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors.
2.Standard :
NFC33-209,BS7870,GB/T12527-2008
3.Rated voltage :
1kV,10kV or 11kV
4.Specification
Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
ABC Cable
Aerial bundled cable
Standard and application scope:
This product is produced in accordance with the standard of IEC60502/BS 2627. The products,Cu core or Al core XLPE or HDPE aerial insulated electric power cable,may be used for the fields where the A.C.rated voltage U(Um) is 0.6/1kV.
Using feature:
1) The max. long-term operating temperature of cable conductor(cable having supporting structure):
a) XLPE insulation :90¡ãC
b) HDPE insulated 75¡ãC
2) When short circuit (the Max. lasting time is not over 5 seconds), the Max.temperature of the cabl:
a)XLPE insulated: 250¡ãC
b)HDPE insulated 150¡ãC
3) When laying, the temperature should not be lower than -20oC;
4) The permitted bend radius should not be less than the diameter of cylinder that had been used for the bend testing.
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap
Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
