Find Verified Wire Cable Harness Wire Mesh Suppliers, Manufacturers and Wholesalers

The price will be determined according to the order amount and the order date. We have 2 factories in Turkey and in Canada. We will ship the products according to the region.

RT Machine, Production Facility;

High-tech machinery park, raw material quality & special formulas are able to produce special roller coating process and polyurethane parts from polyurethane elastomer.

Material Specifications;

STRONG AGAINST ABRASION
RESISTANT TO PRESSURE, STROKE & IMPACT
RESISTANT TO HYDROXIDE SOLVENTS
RESISTANT TO OILS
CAN BE APPLIED AS ANTISTATICALLY
Sectors Used;

TEXTILE
WOOD AND FURNITURE
IRON STEEL & GALVANIZED
PRINTING PRESS
MINE
PAPER
CORRUGATED CARDBOARD

Lightweight, comfortable air-mesh harness for small and medium size dogs

Function & Design

Lightweight, air-permeable Air-Mesh outer material, when dipped in water can be cooling in the summer

Air-Mesh Harness, quick and easy to put on

Adjustable in size with Velcro closure and push button clasp/buckle with sound bumper, makes it

Cross-stitched nylon straps for optimal tension distribution and protection against neck injuries

-Two lightweight D-rings for securely attaching a leash

Reflective elements on the neck and legs for additional safety in darkness

Available in 6 sizes and 8 colors, from 24cm (9.44in) to 54cm (21.25in)Chest circumference

Every Harness has macth color leashes. Sold separately

Suitable between 1,5kgs- 12kgs for all dogs

Handwash only

%100 made in Turkey

Composite gratings with frame or without frame in many size

Brief Introduction of Wire Mesh Cable Tray Systems:
These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits.

Features and Benefits of Wire Mesh Cable Trays:
1. Electroplated Zinc Finish
2. Fast Easy Installation
3. Mesh Design Allows Cable Exit or Entry at any point
4. Clear Cable Identification
5. Supplied in 3 Metre Lengths
6. Significant Cost Savings Compared to Standard Tray Products
7. Simple Creation of Fittings on Site
8. Wide Range of Sizes
9. Heights Shown are Internal Dimensions

Manufacturing:
Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP)
Mode: Top curved / Top Straight
Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated.
Color: Optional


Suggestions:
1). MATERIAL
The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed.

2). SURFACE FINISH:
A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free.
B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays.
C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site.
D). Pickled & Passivated should be used to stainless steel wire trays.

Specification for power and communications cabling containment.
1). SCOPE
Steel Wire Cable Tray conforming to the material and performance of this specification.
2). GENERAL
A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment.
B). Surface Treatments:
i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2)
ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729.
iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L)
C). Steel Wire Cable Tray Widths & Depths
i). Cable Tray dimensions are all internal.
ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm
iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm.
iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm
All trays are of 3005mm long
3). SPECIFICATION
a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -:
4 mm for trays of widths up to 150mm
4.5 mm for trays of widths of 200mm
5.0 mm for trays of widths of 300mm
6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm
b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050)
c). Trays will be constructed with a 50mm x 100mm mesh configuration.
d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray.
e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray.
f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.
g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld.
4. TESTS, CERTIFICATION AND CONFORMITY
a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537.
b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification.
c). Fire test certification should be published in accordance with the E30/E90 standard.
d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result.

We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays.


PSC

According to the receiving orders from our customers collers (min 50kg-max. 1500kg) can be put of for sale with the preferred diameters and surface finishing characteristics such as; bright, extra bright, copper-plated, galvanized, annealed, annealed skin-passed, zinced, chrome plated and phosphate plated.

Technical and mechanical charecteristics: according to uni 3823/din/17223/eni 2701 norms

Production range: diameters from mm 1.50 to mm14.00

Applications:
This type of products lends itself particularly to the manifacture of
Grills and baskets for fitted kitchens
Grills for domestic appliances
Household articles
Supermarket trolleys and baskets
Promotional display units
Bird and pet cages
Omamental chains
Articles fort he car industry..Etc

There are different sizes and sections for special profiles by the specialized methods such as turks heads and wire flatting. Together with the ordinary roun sections. Gunes wire also manufactures square, hexagonal, octagonal, triangulari rectangular, oval, half-oval, half-rounded, keystone, peeled round bars, ground bars and flat shaped sections and various sizes.

Diameter of wire: 1mm-20 mm

Packages: bunches

Weight: 25 kg-1000 kg

Proporties:

Possible to produce with any surface characteristics and with preferred rigidity.

Plating:

Hot galvanized or cold heading wire

Applications:
This type of product lend itself particularly to the manufacture of
For domestic appliances
Accesories of lighting products
Key and lock apparatus
Household articles
Metal nets/meshes
Curtains-venetian blind miles etc