Find Verified Chemicals Allied Products Suppliers, Manufacturers and Wholesalers

Our filler masterbatch is a combination of the purest materials and technology, it gives customers not only cost-effective solutions, but also high-quality finished products.

The CaCO3 and talc grades used in our filler masterbatches are of excellent quality allowing much higher loading compared to conventional filler masterbatches.

Its Applications areas are:
Raffia Tape
PE Carry/Shopping bags
Blow Molding
Injection Molding
Tarpaulin
Strapping

Plastics are sensitive to degradation by UV light and must be therefore protected when exposed to solar radiation. The extent and rate of this degradation is influenced by various parameters such as, for example, climatic conditions, thickness of the part, polymer type or the presence of other additives. Dai A plastics offers a wide range of UV stabilizer masterbatches. These cover applications in agriculture, industrial and food packaging, polymers such as PE, PP, EVA, and range from standard grades to highly performing stabilizer packages based on the latest generation of HALS (Hindered Amine Light Stabilizer).

Our PP based filler masterbatch is a combination of the purest materials and technology, it gives customers not only cost-effective solutions, but also high-quality finished products.
Filler Masterbatch PP is a type of filler masterbatch containing 70-85% super fine Calcium Carbonate in the basic Polyolefin.

PP FILLER MASTERBATCH
I. PRODUCT INTRODUCTION:

Vical PP is a filler masterbatch, based on Calcium Carbonate (CaCO3). This product is manufactured in Vietnam by VICO Plastic Vietnam Co., Ltd, widely used to reduce the production cost and improve the plastic product�¢??s characters: improve the surface antifriction, heat stability, toughness, hardness, rigidity and increase specific gravity of products.

Vical PP contains CaCO3, resin, dispersion agent, processing aid. It�¢??s compatible with PP, ABS, PS�¢?�¦ and suitable for PP threading yarn, injection, blow molding, extrusion, etc.

Vical PP content No-Heavy metal and Nonyphenol, this product is completely suitable for food contact.



II. PRODUCT APPLICATION:

1. PP Woven sack % FIBC;
2. Non Woven;
3. Injection Molding.
4. Extrusion

White color masterbatch - PE carrier
Application: Blowing PE film, shopping bag, HDPE pipe, Injection moulding....
TiO2 content: 20% (+/-3)
Bulk Density: 1.1g/cm3
Plastic carrier: PE polyethylene

EuP (European Plastics Company Vietnam) is world top's 5 largest manufacturer of Carbonhydrate filler masterbatch. Applied for blown film, injection molding, extrusion, HDPE woven sacks, tarpaulin, blow molding, raffia,...
Filler masterbatch EFPE 1001
MI (190�°C/2.16kgs)=0.6�±0.5 g/10mins; Particle size: 1-3 mic, Moisure: â?¤0.08%
Usage rate: 5-40%
Machine speed: low, medium, high
Quality: very good
Application: blown film, injection molding, extrusion, HDPE woven sacks, tarpaulin, blow molding, raffia
Price= (start from) $286/tons

PE filler masterbatch is used for many applications like blow molding, extrusion, injection, making films, bags, laminate. The products range includes automobile materials, flame retardant plastics, flame retardant reinforced plastic, glass fiber reinforced plastic, plastic alloy, high melt woven plastic, conductive plastic, filler plastic, special engineering plastics etc twelve series thousands of grades.

PP filler masterbatch is used for many applications like extrusion, thermo forming, injection molding, making non-woven bag, woven sacks. The products range includes automobile materials, flame retardant plastics, flame retardant reinforced plastic, glass fiber reinforced plastic, plastic alloy, high melt woven plastic, conductive plastic, filler plastic, special engineering plastics etc twelve series thousands of grades.

Application
Soda ash, grades A and B are applicable in the production of all types of glass, including:
crystal,
optical and medical glass,
glass blocks,
foam glass,
sodium silicate soluble,
ceramic tiles;
in ferrous and non-ferrous metallurgy for the production of:
lead,
zinc,
tungsten,
strontium,
chromium,
for desulfurization and dephosphate of cast iron,
in the purification of waste gases,
to neutralize the media.
STORAGE:
Technical soda ash is stored in sheltered storage areas of silos, bunkers, protecting the product from moisture ingress.

Caustic soda is used in the chemical, petrochemical, pulp and paper, medical, food industries, non-ferrous metallurgy, textile industry, in the production of viscose silk and bleaching fabrics, in the aniline-paint industry, in soap making, in the production of aluminum and sodium metal, soluble glass, alkaline batteries , in the processes of water treatment and other areas of the national economy.
In the chemical industry, caustic soda is used for the production of organic dyes, synthetic phenol, glycerol, insecticides, various chemicals and intermediates.

PRODUCTION NAME: FILLER MASTERBATCH PRODUCT GRADE: EF E6-2T

About Product
This product is one of kinds filler masterbatch. It is manufactured by twin crew extruder machine and the most modern technology represent in Vietnam.
General Description

EF E6-2T transparent masterbatch with carrier plastic LLDPE and CaCO3 with Talc Powder this product is processing on machine twin screw extruder.
EF E6-2T use in the HDPE, LDPE blow film.It make increase forming, transparent, not affect properties film transparent, it will improve machine extrusion efficiency, high gloss, good dispersion, non-toxic.

PRODUCTION NAME: FILLER MASTERBATCH PRODUCT GRADE: EF BIOMATES 01
About Product This product is one of kinds filler masterbatch. It is manufactured by twin screw extruder machine and the most modern technology represent in Vietnam. General Description This product contains: CaCO3 , bio resin and some additives. It’s suitable blowing film such as shopping bag, rolling film, food and industry bag. EF BIOMATES 01 is material biodegradable 100%, it is certificated OK compost by VINCOTTE. Technical Analysis Physical Property Items Method of experiment Standard Unit Calcium Carbonate (CaCO3) content ASTMD5630 75 Wt % Melt Mass-Flow Rate (160oC/2.16kgs) ASTMD1238 4 g/10 min Melt Temperature DSC 100 OC Bulk density ASTMD1895 1.20 g/cm3 Particle size of CaCO3 Powder (D50) Malvern 2 µm Moisture ASTMD644

PRODUCTION NAME: RED MASTER BATCH PRODUCT GRADE: EMPE 402
About Product We respectfully present to you a brand-new product which apply the newest, the most modern technology according to European standard first time represent in Vietnam. General Description This product contains: Red( 57:1) pigment, polyolefin and additives. It’s suitable for blow film, extrusion blow, injection molding, and some other product. This product has good dispersion ability with high color strength, Free of agglomeration, easy to use and bring many other benefits for users Technical Analysis
Physical Property Items Method of experiment Standard Unit Red (57:1) Pigment 20 wt % Melt Mass-Flow Rate (190oC/2.16kgs) ASTM D1238 16 g/10 mins Melt Temperature DSC 110 oC Bulk density ASTM D1895 0.66 g/cm3 Water Content ASTM D644 < 0.1 wt %
Properties:
Appearance (Surface color) : Red Additives : Dispersion agent, processing aid Processing temperature : 140 –200 oC Heat resistance : 180 oC Light fastness : 4-5 Migration resistance : 5 Carrier resin : LLDPE Pellet Size : 3x3 (±0.3) mm Packing : 25 kgs per PP bag Storage : Keep at dry condition
Medical norm Attain the Safety Norm for Health and Foodstuff issued by Vietnam Directorate for Standards and Quality allow the decision 3339/2001/QÐ-BYT promulgated by Vietnam Ministry of Health. Safety apply for handling process. No healthy damage infected.
. QC Department

Hitech Plast PE Filler Masterbatch is made from over 75% Bari Sunfat (BaSO4), Calcium Carboante Powder (white and bright from Yen Bai quarry in Vietnam) mixed with PE resin (LDPE, HDPE, LLDPE, etc) and additives.

It can use in many industries such as plastic bags and films (extrusion, injection or blowing), raffia, raffia coating, woven, jumbo bag, non-woven, injection, lamination, tarpaulin, etc to reduce the cost while still meet the quality standard of the manufacturer.

Hitech Plast PE Filler Masterbatch is made from over 75% Calcium Carboante Powder (white and bright from Yen Bai quarry in Vietnam) mixed with PE resin (LDPE, HDPE, LLDPE, etc) and additives.

It can use in many industries such as plastic bags and films (extrusion, injection or blowing), raffia, raffia coating, woven, jumbo bag, non-woven, injection, lamination, tarpaulin, etc to reduce the cost while still meet the quality standard of the manufacturer.