DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used. The waveform display effect is good, and the color ways are grayscale and color temperature. With a waveform refresh rate of up to 50000wfm/s, it is easier to display abnormal signals with low probability. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP. Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform. The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals and protocol signals. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. The original chopping output function can store up to 500 customized signals. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automatic adjustment, adaptive 25%, 50%, 75% electric level trigger, it only takes 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 250 sets of waveform data or 90 pictures can be stored, and 500 intercepted wave data can be stored at the same time. The data browser can browse and view the currently saved waveform data and pictures, and the waveform data supports operations such as zooming and moving. High voltage anti-burning protection, all gears can withstand high voltage up to 400V. USB data export, you can connect to a computer to copy picture files, and you can also copy system files to the oscilloscope for system upgrades. 5V2A fast charging, and 1 hour can charge to 80%.
Features:
Intelligent anti-burn,1X can withstand up to 400V withstand voltage.
100MHz analog bandwidth @ 1GSa/s sampling rate (1X=5MHz,10X=100MHz).
Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast.
Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation.
High measurement voltage range, 1X can measure 0~40V, 10X can measure 0~400V,100X can measure 0~4000V.
Up to 12 parameters measurement: VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Period.
Cursor measurement function, it is convenient to manually measure the period and frequency and voltage.
Complete triggering function (single, normal, automatic).
At any time, the waveform display (pause function) is frozen.
Equipped with high efficiency One-button AUTO.
One-button waveform storage and screenshot.
Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.
Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.
FFT display function, can analyze the spectral characteristics of the signal.
Built in 6000mAh rechargeable lithium battery,fully charged for 4 hours of continuous use at the highest screen brightness.
Memory compression technology, waveform refresh screen does not flicker.
Screen brightness adjustment.
Background grid brightness adjustment.
Ultra thin, easy to carry.
Specifications:
Material: ABS
Color: black+white
Analog band width: 100MHz * 2
Number of channels: 2 channels
Maximum real time sampling rate: 1GSa/s
Vertical sensitivity: 50mV/div~500V/div
Horizontal time base range: 50S/div~10nS/div
Maximum test voltage: 40V (1X probe), 400V (10X probe)
Storage depth: 240Kbit
Input resistance: 1M
ADC precision: 8bits
Coupling mode: AC/DC
Trigger mode: Single, Normal, Auto
Trigger edge: Rising edge / Falling edge
External trigger voltage: 0~40V
Display: 7 inch - 800*480
Operating: capacitive touching screen + gesture
Extension ports: USB picture export
Power supply: 1 * lithium battery, 6000mAh (included)
I have available premium high grade fresh coffee, 115, 000lbs.
The coffee is pikes place starbucks. There are 4-5 lots within this deal. They are: columbian, ethiopian, brazilian and peruvian.
Approximately 40, 000 lbs are beans (cafe verona) and 75, 000 lbs are regular ground (pikes place). We can also ground the beans upon request.
It can be packed in bulk from 1000lb bags, 25 lb boxes etc. Asking price $2.25/lb
Please note: starbucks name cannot be on any packaging.
Variable 2-speed 1/2"" Hammer Driver-Drill (0-400 & 0-1,500 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs.
6-1/2"" Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs.
Reciprocating Saw provides 0-2,900 SPM with ""tool-less"" blade changes & shoe adjustments and weighs only 7.9 lbs.
Variable speed Impact Driver (0-2,300 RPM & 0-3,200 IPM) provides 1,420 in.lbs. of Max Torque and weighs only 3.3 lbs.
4-1/2"" Cut-Off/Angle Grinder produces an impressive 10,000 RPM and weighs only 5.0 lbs.
1/2"" Impact Wrench delivers 2,040 in.lbs. of Max Torque and weighs only 3.8 lbs.
7/8"" SDS-PLUS Rotary Hammer delivers 0-1,100 RPM and 0-4,000 BPM for faster drilling and weighs only 7.7 lbs.
3/8"" Angle Drill delivers 0-1,800 RPM with low profile keyed chuck and paddle switch for use in close quarters
Drywall Screwdriver delivers 4,000 RPM to handle drywall and framing applications and weighs only 3.8 lbs.
1/2"" High Torque Impact Wrench delivers 325 ft.lbs. of Max Torque and weighs only 7.5 lbs.
5-3/8"" Metal Cutting Saw produces 3,600 RPM and weighs only 5.7 lbs.
Variable 3-speed blower produces 0-18,000 RPM for a maximum air velocity of 179 MPH
Dual Fluorescent / Incandescent Flashlight has a built-in hanger and runs 15 incandescent hours and 4 fluorescent hours per charge
24 Replacement Safety Slide Cutter for Film Dispenser
This blade allows you to quickly and easily cut film or foil at any desired length, reducing waste from snarled rolls, while also eliminating cross-contamination risks that come with using unsanitary cardboard cutter boxes. This PVC safety cutter with a hidden blade has stopping points on both sides, minimizing blade exposure and reducing the risk of injury when slicing. This product combines quality and safety, ensuring the safest working environment possible for your employees.
18 Replacement Safety Slide Cutter for Film Dispenser
This blade allows you to quickly and easily cut film or foil at any desired length, reducing waste from snarled rolls, while also eliminating cross contamination risks that come with using unsanitary cardboard cutter boxes. This PVC safety cutter with a hidden blade has stopping points on both sides, minimizing blade exposure and reducing the risk of injury when slicing. This product combines quality and safety, ensuring the safest working environment possible for your employees.
12 Replacement Safety Slide Cutter for Film Dispenser
This blade allows you to quickly and easily cut film or foil at any desired length, reducing waste from snarled rolls, while also eliminating cross contamination risks that come with using unsanitary cardboard cutter boxes. This PVC safety cutter with a hidden blade has stopping points on both sides, minimizing blade exposure and reducing the risk of injury when slicing. This product combines quality and safety, ensuring the safest working environment possible for your employees.
Henan E-Grind Abrasives Co., Ltd. produces electroplated tools by plating diamond or CBN grains with a single layer of nickel. These tools have outstanding cutting performance and a long service life.
Electroplated Diamond Tools For Sale
Electroplated CBN Tools
Electroplated CBN tools are widely used for grinding and cutting all kinds of steel materials, like HSS, tool steel, SS steel, etc.
Electroplated Diamond Tools
Electroplated diamond tools are widely used for grinding and cutting all kinds of hard-brittle materials, like stone, glass, crystal, tungsten carbide, sapphire, etc.
What is Electroplated CBN Tool?
With electroplating technology, CBN grains will be plated onto a steel body and form a single CBN layer as a working layer to grind parts.
Electroplated CBN tools can be made in very complicated profiles with high precision, so they are widely used in the precision grinding process.
Now the price of electroplated diamond grinding disc and electroplated wheel is reasonable, anything you need, please contact us.
As top of abrasive cbn grinding wheel manufacturers in china, Henan E Grind Abrasives Co Ltd. is focused on providing efficient grinding solutions to customers. With more than 50 years of experience in the super abrasives industry, E-Grind providing the best products, great service, and professional technical support that meet and exceed our customers' needs.
STANDARD PDC CUTTER
The PDC Cutter produced by the PDC cutter manufacturer combines a polycrystalline diamond layer for hardness and wear resistance with a cemented carbide substrate for strength and impact resistance.
Polycrystalline diamond composite, a super hard material, is formed by sintering single-crystal diamond micro powder with binders, typically cobalt or nickel, under high temperatures and pressures.
Diamond composites used for drilling are primarily flat, though some specialized shapes include cylindrical or a combination of cylindrical and hemispherical forms.
Types Of Standard PDC Cutter
PDC Insert
Top Tool employs a sophisticated synthesis technique to fabricate PDC Cutters, seamlessly integrating the merits of diamond and cemented carbide.
Cambered Face PDC Cutter
This type of the PDC cutter is different from the common ones. It has higher impact resistance with its cambered face shape of diamond surface.
Conical Shaped PDC Cutter
Our conical PDC cutters focus more stress on rocks due to their shape and have a thicker diamond table for better impact strength and wear resistance. In tough drilling conditions, they boost the drill bit's performance and ROP.
Domed Shaped PDC Cutters
The PDC steel body bit, designed for dome PDC cutters and PCD inserts, offers fast drilling and efficient rock debris clearance with less mud. Ideal for complex hard-layer drilling, its spherical tungsten carbide enhances bond area. The claw-designed interface between PCD and tungsten carbide reduces stress, improving toughness, strength, and longevity.
Ridge Shaped PDC Cutter
Our organization introduced a ridge-shaped diamond composite sheet with superior abrasion resistance and impact toughness. Its unique inclined surface structure reduces the risk of collapse and stress concentration, making it ideal for coal fields and oil well drills.
Maxwellon TF2103 is a powerful 9-in-1 multi-function OTDR, integrating optical testing, event analysis, power measurement, and VFL. It features a 4.3" capacitive touchscreen, supports USB, SD, and Micro USB data export, and allows screen capture on any interface. With power bank charging, recessed optical ports, and international-standard test data compatibility, it ensures high precision and efficiency. The high-performance CPU and long battery life make it an ideal tool for fiber optic testing.
3986 Series Noise Figure Analyzers include 3986A (10 MHz to 4 GHz), 3986D (10 MHz to 18 GHz), 3986E (10 MHz to 26.5 GHz), 3986F (10 MHz to 40 GHz) and 3986H (10 MHz to 50 GHz). Features of the product include wide-range frequency coverage, high-sensitivity reception, friendly user interface, big screen dual channel HD display, various external interfaces, and dual noise source drive etc. It can measure the noise figure and gain of amplifiers, up converters and down converters, as well as to support automatic measurement of noise figure of multi-stage converters. Guide interfaces are intuitive for setting measurement modes. The comprehensive loss compensation function can compensate loss induced in measurement channel before and/or after the device under test by means of fixed or table forms.
