Find Verified Wire Netting Mesh Suppliers, Manufacturers and Wholesalers

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.

Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.

We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.

The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Property Specification
Material Aluminium (various alloys)
Types Cast aluminium, extrusions, sheets, turnings, wheels, cans
Purity Varies by grade, typically 90%â??99% aluminium
Moisture Content Should be minimal, typically below 2%
Contaminants Free from excessive iron, plastic, dirt, and non-metallic materials
Density Varies based on form (solid, shredded, or compressed)
Applications Recycling, smelting, automotive, construction, packaging

SPECIFICATIONS

Product name: Rectangular Galvanized Wire Mesh
Wire Steel Grade: Carbon Steel SAE 1006 to SAE 1010
Wire type: Galvanized
Wire Diameter: mm 2.8 (+/- 0.08)
Maximum Traction Strength: MPa 485
Minimum Zinc Coat: g/m�² 85
Supply Form: In Rolls
Roll Length : 100m (+/- 1)
Roll Height : 800 mm (+/- 16)
Roll Weight : 42.5 Kg
Rectangular Mesh Wide : 170 mm (+/- 5)
Rectangular Mesh Height Variable, increasing from lower to upper end

Price FOB per 20' container with 200 rolls

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.

Please feel free to contact us for further details.

Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details

A "Roth Net Retriever" suggests a medical device used for retrieving objects or specimens, possibly in the context of endoscopy or minimally invasive procedures. The "POLYP 230CM" part of the description indicates a potential length of 230 centimeters, which could refer to the overall length of the device.

Here are some general considerations:

Usage: The Roth Net Retriever is likely designed for capturing or retrieving tissue samples, polyps, or foreign bodies during endoscopic procedures.

Length: The specified length of 230 centimeters could be relevant for reaching and maneuvering within the gastrointestinal tract during endoscopy.

STERIS: As a company known for providing healthcare solutions, the product may be designed to meet high standards of quality and hygiene.

Bard is a well-known manufacturer of medical devices, including products for hernia repair. Meshes are commonly used in hernia repair procedures to provide support and reinforcement to weakened or damaged tissue in the abdominal wall.

Here are some general considerations:

Anatomical Design: The term "ANATOMICAL MESH" suggests that the mesh is designed to fit anatomical contours, potentially allowing for better conformity to the patient's anatomy during hernia repair.

3DMAX MID: This part of the name may refer to specific design features or characteristics of the mesh. For example, "3DMAX" might imply a three-dimensional design for optimal support.

Mesh Material: Hernia repair meshes are typically made of synthetic materials, such as polypropylene, which is known for its durability and biocompatibility.

Surgical Technique: The mesh is used by surgeons during hernia repair procedures to reinforce and support the abdominal wall, reducing the risk of hernia recurrence.

The Bard Ventralex Hernia Patch with Strap is a medical device used for hernia repair. Bard, now a part of BD (Becton, Dickinson and Company), is a well-known company that produces a variety of medical devices, including products for hernia repair.

Here are some general features and considerations for the Bard Ventralex Hernia Patch with Strap:

Hernia Repair: The device is designed for use in hernia repair surgeries. Hernias occur when an organ or tissue protrudes through a weak spot in the surrounding muscle or connective tissue.

Mesh Material: The hernia patch typically consists of a mesh material. Meshes used in hernia repair are often made of synthetic materials like polypropylene.

Strap: The strap component is an additional feature that may be designed to help secure the mesh in place during the surgical procedure.

Placement: Surgeons use the hernia patch to reinforce the weakened area of the abdominal wall, reducing the risk of hernia recurrence.

Minimally Invasive Techniques: In some cases, the hernia patch may be used in minimally invasive or laparoscopic hernia repair procedures.

The Bard PerFix Light Plug is a medical device used in hernia repair. Bard is a well-known manufacturer of medical devices, and their hernia repair products include mesh implants designed to reinforce and support weakened or damaged tissue in the abdominal wall.

Key features and considerations for the Bard PerFix Light Plug may include:

Hernia Repair: The PerFix Light Plug is specifically designed for use in hernia repair procedures. Hernias occur when organs or tissues protrude through a weak spot in the surrounding muscle or connective tissue.

Mesh Material: The product is likely made of a mesh material. Meshes used in hernia repair are often constructed from synthetic materials, such as polypropylene.

Plug Design: The term "plug" suggests that the device is designed to fill or cover a defect in the abdominal wall associated with a hernia.

Lightweight Design: The inclusion of "Light" in the product name may indicate that the mesh is designed to be lightweight while still providing effective support.

Surgical Technique: The PerFix Light Plug is used by surgeons during hernia repair procedures to reinforce the tissue and reduce the risk of hernia recurrence.

SPECIFICATIONS

Product name: Galvanized Link Mesh
Wire Steel Grade: Carbon Steel SAE 1006 to SAE 1010
Wire type: Galvanized
Wire Diameter: mm 2.8 (± 0.03)
Mechanical Resistance MPa: 30 ~ 47
Supply Form: In Rolls
Roll Length: 15 m (± 0.25)
Roll Height: 1500/1800 mm (± 30)
Roll Weight; 46/55 Kg
Dimensions Squares: 50mm

Prices
CTN Price per container Price per roll
2.8x15x1.8
20 $10,600.00 $106.00
40 $21,200.00 $106.00
2.8x15x1.5
20 $8,404.00 $84.04
40 $16,807.99 $84.04


Prices negotiable

I can provide some general information:

PTFE Guide Wire:

PTFE stands for polytetrafluoroethylene, which is a synthetic fluoropolymer of tetrafluoroethylene. It is known for its low friction properties and is often used in medical applications.
Medtronic:

Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. This includes products used in cardiology, neurology, diabetes, and other medical specialties.

Guide wires are commonly used in medical procedures, particularly in cardiology and radiology, to guide catheters and other devices through blood vessels or other anatomical structures. The Terumo Radifocus Guide Wire M is likely designed for use in vascular interventions.

Here are some general characteristics you might find in Terumo guide wires:

Material: Guide wires are typically made of materials such as stainless steel or nitinol.

Coating: Some guide wires may have hydrophilic or hydrophobic coatings to enhance their performance during navigation through blood vessels.

Tip Design: The tip design may vary based on the intended application, with options like floppy or stiff tips.

Diameter and Length: Guide wires come in various diameters and lengths to suit different procedures and anatomies.

Radiopaque Markers: Radiopaque markers help visualize the position of the guide wire under fluoroscopy.

Mig-Mag Welding Machines
Cheap and rapid welding. Aluminum and stainless stel welding. High tension strenght. Low splash. Three phase constant voltage rectifier. Automatic or manual welding. Adjustable output choke.

Technical Specifications MIG/MAG 160A MIG/MAG 250A MIG/MAG 350A MIG/MAG 450A MIG/MAG 500A
Main Voltage V 380 380 380 380 380
Frequency Hz 50-60 50-60 50-60 50-60 50-60
Max Power Kva 3,5 8,5 12 16,5 27
Welding Current %100 A 160
130 250
200 350
300 450
350 500
420
Number of stages 18 18 18 40 40
Open Circuit Voltage V 16-25 16-32 18-38 18-44 18-47
Adjustment Range A 20-160 30-250 40-350 40-450 50-500
Wire feet Rate m/dk 1-15 1-15 1-20 1-20 1-20
Electrodes dia. m/m 0.6-0.8 0.6-1.0 1.8-1.2 1.8-1.6 0.8-2
Protection IP21 IP21 IP21 IP21 IP21
Cooling F F F F F
Isolation H H H H H
Weight kg 70 100 115 175 200

Welding Rectifier
Technical Specifications RDK - 250 RDK - 350 RDK - 450 RDK - 450
Main Voltage V 380 380 380 380
Frequency Hz 50-60 50-60 50-60 50-60
Max Power Kva 7,5 12 18 20
Welding Current %60 A 160
250 250
350 350+
450 420
500
Open Circuit Voltage V 80 DC 80 DC 80 DC 80 DC
Adjustment Range A 20-250 20-350 20-450 20-500
Electrodes dia. m/m 1.5-5 1.5-6 1.6-8 1.5-10
Welding Cable Cross mm 25 35 50 70
Cooling AIR AIR AIR AIR
Protection IP21 IP21 IP21 IP21
Weight kg 198 223 248 265

Automated Spot Welding Machine:
Technical Specifications
* Pneomatic System
* PLC Controlled digital remote control
* 6 to 40 programs capacity
* 2 to 40 ns piece pistons
* Different current value for each pistons
* Lock of individual pistons
* 2 axis piston groups
* Railed, car system
* 1 to 20 mm cadet spot welding
* Pedal warning
* 380 volt 2 phase input
* 20 volt dc inductor
* Water cooled
* Moving bottom table

Welding Transformers:
Technical Specifications TR 250 TR 350 TR 400 TR 450
Main Voltage V 220 220-380 220-380 220-380
Frequency Hz 50-60 50-60 50-60 50-60
Max Power Kva 6 9 12 15
Max . Welding Current A 250 350 400 450
Min . Welding Current A 40 40 70 70
Welding Cable Cross mm 16 25 35 35
Electrodes dia. m/m 2.5-3.25 2.5-4 2.5-5 2.5-6
Weight kg 22 71 94 118.

he Terumo Runthrough NS PTCA (Percutaneous Transluminal Coronary Angioplasty) guide wire is a product manufactured by Terumo Corporation, a global medical device company. Guide wires are essential tools used in cardiovascular procedures, particularly in angioplasty and stenting, to navigate through blood vessels and provide support for the delivery of catheters and other interventional devices.

Key features and characteristics of the Terumo Runthrough NS PTCA guide wire may include:

Hydrophilic Coating: Many Terumo guide wires, including the Runthrough NS, are known for their hydrophilic coating. This coating facilitates smoother navigation through blood vessels, reducing friction and enhancing steerability.

Flexible Design: The guide wire is designed to be flexible, allowing it to navigate tortuous vessels and reach target locations with precision.

Radiopaque Tip: The tip of the guide wire is often radiopaque, making it visible under fluoroscopy or other imaging modalities. This feature helps interventional cardiologists visualize the position of the guide wire during the procedure.

Different Tip Configurations: Guide wires may come with different tip configurations, such as soft or floppy tips for ease of navigation or more supportive tips for crossing lesions.

Various Lengths and Diameters: Terumo typically offers guide wires in various lengths and diameters to accommodate different patient anatomies and procedural requirements.

I can provide general information about guide wires used in medical procedures.

Guide wires play a crucial role in various interventional procedures, such as angiography and angioplasty, where they are used to navigate through blood vessels and provide a pathway for the delivery of catheters and other medical devices.

We Provide Offsite Pre-fabrication & Welding Bays With All Welders Class 1 Zurich Accredited In Mig & Tig On Carbon And Stainless Steel Products

Packing:
1) 10kg/ctn
2) 1kg/bag, 10 bags/carton
3) 500g/bag, 20 bags/carton
4) 250g/bag, 40 bags/carton
5) 1kg/bag, 10 bags/mesh
6) 500g/bag, 20 bags/mesh
7) 5kg/bag, 10kg/bag, 20kg/bag.
8) as customer request.

Transportation Temperature/Storage/Preservation: -3C C