Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers.
Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows.
The heating system is FANCOIL heaters connected to classical heating system.
Basic equipment convectors as follows:
• box (making possible options: fiberglass, metal powder-coated);
• copper-aluminum heat exchanger;
• flexible connection hoses with shut-off valves;
• tangential fans (in models with forced convection)
Optional equipment:
• oak grill or duralumin (different colors, roll or longitudinal)
• Electronic room thermostat;
• converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300);
• converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120);
• smooth speed control of fans.
Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting.
Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors:
• box of fiberglass-50 years
• box with powder coating 10 years
• wooden box (floor) - 2 years
• copper-aluminum heat exchanger 10 years
• aluminum grille-5 years
• wooden lattice - 1 year
• electrical parts - 5 years
• valves - 1 year
Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter.
Versatile polo that not only looks smart, but also is soft and light. With the benefits of the ELS cotton, the collar offers a neat and non-hairy look, combining with the curly resistant features for a sharp and lasting appearance. For people who prefer to stay active and feel comfortable.
Pique, 95% Cotton, 5% Lycra
Made with the addition of lycra, this lightweight pique polo allows you to move with ease.
Water Repellent Finish
Moisture management technology combines high breathability, moisture absorption and water repellent features, keeping you free from sweat marks and stains for your all day comfort.
Color Durability
New dyeing technologies guarantee vibrant color through many years of wear.
HOT-H stainless steel orthopedic and neurosurgery surgical operating table
HOT-H multi-purpose operation table is an improvement product developed on the basis of 3008 series head-manipulation type multipurpose operation table and is for use of general operations in chest surgery, department of ophthalmology, department of otolaryngology, department of obstetrics and gynecology, urological department etc. As a unit of non electronic control system comprehensive operation equipment, it is convenient and flexible to operate.
PRODUCT'S FEATURES:
1) A multifunctional operation table that applies to various surgical operations and examinations.
2) Adoption of a foot hydraulic pump that integrates oil tank of oil pump and drive mechanism.
3) Adoption of the imported cylinder that controls actions of table top and is convenient to operate and reliable to locate.
4) Compact and rational structure and originate model.
5) Built-in waist bridge is convenient to use.
6) Both guide rail and accessories are made of corrosion resistant stainless steel.
7) All mattresses use the new-style materials that are acid and alkali resistant and disinfection durable. good price
Dear Sir Madam
Our company, as the main exporter, with full responsibility are willing and able to enter in long-term cooperating with potential customers and we offer You our products bellow origin Ukraine :
1. Refined sunflower oil deodorized:
Place of Origin: Xiamen,China
Brand Name: OEM brand
Model Number: Uzet-pipe-001
Plastic molds material:Steel P20.718HH, 2738 ,H13, 45#,C50 ect
Shaping Mode: Plastic Injection Mold
Product Material: Plastic
Product: Household Product
Precision: 0.005mm
Design service: available
Plastic Material: PP , PS, PET, PE ,ABS,ect
Mould Base: LKM.HASCO,ect
Cavity: Single/Multi
Runner: Cold /Hot
Surface treatment: machined finish
Mold Life: 500000shots-1000000shots
Design Software: UG ,Proe ,CAD/CAM,ect
Lead Time: 25-30days
Delivery Port: xiamen,China
Packaging Details:
wooden case + bubble bag
cardbord box + bubble bag
OEM Factory of Injection Plastic Mold Manufacturing from China Supplier
Product Type Plastic injection mold(mould)
Our Services Plastic mold design, plastic mold making, products sampling,plastic products produce,plastic injection molding,
Material Aluminum,Brass,Stainless Steel,Copper,Plastic, Or as per the customersâ?? requirements
Surface Treatment Anodizing,Sandblasting,Painting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving
Drawing Format .jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc
Service Project To provide production design, production and technical service, mold development and processing, etc
Testing Machine Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester and so on
Packing Foam, Carton, Wooden boxes, or as per the customerâ??s requirements
Payment Terms T/T,Western Union,Paypal,LC, DP,DA
Certification SGS, ISO9001
FAQ
1. Q: What kind of products can you do?
A:plastic mould, injection mold, Plastic injection molding , plastic parts mass production .
2. Q: What kind information is needed for quotation?
A: 1) Sample photo with size or 2D/3D design
2) Product material
3) The quantity
4) Runner type: cold or hot
5) Mould steel type, P20, 718, 2738, H13, S136, 2316 etc.
3. Q: I have no 3D drawing, how should I start the new project?
A: Sample is needed OR your ideas,then we could help to finish the 3D drawing.
4. Q: How long will it take for finishing injection mold?
A: Usually it will take around one month to finish plastic injectioin mold.
5. Q: How about the samples?
A: Some plastic product samples will be made after mold finished and also would send you for your checking
6. Q: How about the mould modify?
A:Modifying will be processed for free according to your comments if any difference from currently after you saw samples.And new samples will be made.
7. Q: How about the proprietary rights of the plastic injection mold?
A: Customer paid the mould so it all belong to Customer.
Key features of the production line:
Automatic washing of divider;
Option for add additional equipment:
- Automatic feeding of dough into bunker of extruder
-Stacker for stacking for grouping products in a stacks;
Different recipe;
Design of lines can be developed according to customerâ??s production premises
Equipment set of the line:
- dough divider;
- press;
- feeding conveyor;
- two tired tunnel oven;
- cooling conveyor;
- inclined conveyor;
- two rowed stacker.
Capacity - 100 - 250 kg/h
Raw materials: flour
Energy source for oven - electricity
All components contacting with product are made of stainless steel AISI 304
Drives and components are made in Europe
Control system is carried out with controller and TOUCHSCREEN
Key features of the production line:
Automatic washing of divider;
Option for add additional equipment:
- Automatic feeding of dough into bunker of extruder
-Stacker for stacking for grouping products in a stacks;
Different recipe;
Design of lines can be developed according to customerâ??s production premises
Equipment set of the line:
- dough divider;
- press;
- feeding conveyor;
- two tired tunnel oven;
- cooling conveyor;
- inclined conveyor;
- two rowed stacker.
Capacity - 100 - 250 kg/h
Raw materials: flour
Energy source for oven - electricity
All components contacting with product are made of stainless steel AISI 304
Drives and components are made in Europe
Control system is carried out with controller and TOUCHSCREEN
Key features of the production line:
Automatic washing of divider;
Option for add additional equipment:
- Automatic feeding of dough into bunker of extruder
-Stacker for stacking for grouping products in a stacks;
Different recipe;
Design of lines can be developed according to customerâ??s production premises
Equipment set of the line:
- dough divider;
- press;
- feeding conveyor;
- two tired tunnel oven;
- cooling conveyor;
- inclined conveyor;
- two rowed stacker.
Capacity - 100 - 250 kg/h
Raw materials: flour
Energy source for oven - electricity
All components contacting with product are made of stainless steel AISI 304
Drives and components are made in Europe
Control system is carried out with controller and TOUCHSCREEN
Key features of the production line:
Automatic washing of divider;
Option for add additional equipment:
- Automatic feeding of dough into bunker of extruder
-Stacker for stacking for grouping products in a stacks;
Different recipe;
Design of lines can be developed according to customerâ??s production premises
Equipment set of the line:
- dough divider;
- press;
- feeding conveyor;
- two tired tunnel oven;
- cooling conveyor;
- inclined conveyor;
- two rowed stacker.
Capacity - 100 - 250 kg/h
Raw materials: flour
Energy source for oven - electricity
All components contacting with product are made of stainless steel AISI 304
Drives and components are made in Europe
Control system is carried out with controller and TOUCHSCREEN
Key features of the production line:
The length of production line depends on product range from 4.5m up to 10.0m;
Wide range of products due to replaceable units:
- feeding of liquid fillings
- sprinkling with sugar, poppy seeds, sesame, etc.
- twisting in a roll
- one- and multiple folding
- surface cuts
Equipment set of the line:
- forming table
- calibrator
- cutting unit
- a sprinkler of loose ingredients with a humidifier and pressure roller
- depositor of liquid filling
- folding nodes
- guillotine
Capacity: 100 - 500 kg/h
Energy source: electricity
All components contacting with product are made of stainless steel AISI 304
Drives and components are made in Europe
Control system is carried out with controller and TOUCHSCREEN
Additional unit for rolling specially for producing taralli
Replaceable dies for different diameters of product
Option for additional equipment:
- dough feeding into extruder automatic system
- sprinkler unite (poppy, sesame ect.)
- automatic stacking system on baking trays;
Design of lines can be developed according to customers production premises
Equipment set of the line - - inclined conveyor;
- dough ribbon extruder;
- multiroller;
- feeding conveyor with knife mechanism;
- forming machine;
- machine for trays feeding;
- unite for dough base stacking;
- gilliotine.
Capacity - 100-300 kg/h
Raw material: flour
Energy source for oven electricity
All components contacting with product are made of stainless steel AISI 304
Drives and components are made in Europe
Control system is carried out with controller and TOUCHSCREEN
33 Stainless Steel Coils Suppliers
Short on time? Let Stainless Steel Coils sellers contact you.
