Commodity: Feed Barley Ngmo
Origin: Brazil / Usa / South Africaspecification:
Feed Barley
Moisture: 14.0% max
Protein: Not regulated
Foreign grain: 2 % max
Damaged kernels: 5% m.
Grain admixture: 2 % max
Test weight: 630 g/L max
Total aflatoxin: 20 ppb max
GMO: NON-GMO as per EU regulation
Pressure-Volume and Flow-Volume, displayed waveforms can be cycled instantly with a touch of a button
3.Standard integrated metallic modular respiratory circuit; completely solves the problem of gas sealing under high temperature disinfection, easy to clean and disinfect
4.Power Failure Support Functions: Automatically converts to backup power mode during AC power outages
5.Equipped with electronic pressure differential flow sensor, imported respiratory control valve, stable and reliable, rapid response time
6.High precision five tube flowmeter, fitted with interlocking oxygen-nitrous oxide supply, guarantees oxygen output is never lower than 21%
7.Nonhazardous environmentally friendly frame, precise construction, elegant design, equipped with automated self-checking function during startup and an automatic self-calibrating sensor
8.Alarms: Audible and/or visual alarms for tidal volume, airway pressure, oxygen concentration, asphyxia, power failure, oxygen failure and other alarms, also features a alarm query function
9.Vaporizer: Imported tank components assembled locally; Enflurane, Isoflurane and Sevoflurane (Halothane optional). Also possesses self-compensating functionality
10.Advanced and stable Adjustable Pressure Limiting (APL) valve, suitable for low and ultra low flow anesthesia
11.Equipped with advanced international rotating Na-lime tank, easy-operate, requires only one hand, and uses imported PPSU material and temperature resistant to 134�°C
12. Multi-parameter Patient Monitor: Optional
12 Power Regulation Correction Suppliers
Short on time? Let Power Regulation Correction sellers contact you.
signed to transmit / receive data via radio channel at a speed of up to 9600 bit / s in the frequency range (2410-2465) mhz with the transmitter output power up to 10 mw.
If cable routing between devices (which usually are using wired communication channels for data exchange) is impossible, then it is necessary to look for other means of communication, other than wired. Wireless transmission of data between devices is one of possible solutions for this problem. Wcd is a variation of radio extenders for communication lines using for communication interfaces rs-232 and rs-485.
For more information please visit our website www.Technotrade.Ua
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model - 3418+
¦a) thickness*width of the sheet ,mm 6,3*3150
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 11,8
Dimensions, mm 4000)1900)1700
Weight, kg 6200
Guillotine shears model -- 3316++
Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3316++
¦a) thickness*width of the sheet,mm 4,0*2500
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type manual
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 8,5
Dimensions, mm 3300)1630)1520
Weight, kg 3870
Guillotine shears model -- 3314+
Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/
The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3314+
¦a) thickness*width of the sheet,mm 2,5*1600
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type Manual/screw
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 3,2
Dimensions, mm 2300)1570)1470
Weight, kg 2000
Guillotine shears model -- 3416
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3416
¦a) thickness*width of the sheet, mm 4,0*2000
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 5,6
Dimensions, mm 2610)1600)1510
Weight, kg 2870
Guillotine shears model --478
Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-.
Specification
Maximum thickness, mm 16
Maximum width, mm 2200
Mains current 3 phases, AC
Frequency, Hz 50
Operating voltage, V 380
Stroke frequency 20
Engine power, KWt 30
Dimensions, mm 3150/2275/2350
Weight, kg 9800
Guillotine shears models --+ 3214
Model --+ 3214
¦a) thickness*width, mm 2,5*2500
Stroke frequency, p/min 33
Main drive,KWt 3
Dimensions, mm 3120)2000)1330
Weight, kg 1800
Crank metal sheet guillotine shears model --+ 6020
H6 * L2500mm
Designed for the sheet cutting with the thickness up to 6 mm.
Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/
Specification
Max cutting thickness, mm 6
Max cutting width, mm 2500
Stroke frequency, min-1 50
Power, KWt 8,5
Dimensions, mm 3400)1400)1450
Weight, kg 3650
The charcoal kiln UMT-3 has all the unique qualities installations series "UMT". But in this model we have provided not only enhanced protection from the so-called "human factor", but also we have developed an automatic protection that works completely offline. It allows to reduce in several times the risk of equipment damage from negligence of employees and increase productivity by 10-15% . Now the minimum capacity of this charcoal kiln is 35 tons per month using wet wood till 50 tons per month using dry wood.
Also its possible to burn all kinds of fuel briquettes such as "Pini Key" and "Nestro" into charcoal briquettes The productivity of the briquette is 100-120 tons / month
1.Improved installation design.
2.Increased productivity from 35 tons per moth for charcoal and 100-120 tons per month per briquettes
3.Automatic protection from extreme temperatures, works completely offline.
4.The high quantitative and qualitative characteristics of charcoal and briquette. The ratio of wood to charcoal is 5.1m3 per 1 ton of charcoal
5.Low operating costs. The equipment serves one person whether it is a single installation, two or three.
6.Works on its own gas. Power consumption is 20 W/hour, 24V/hour
7.Quick and easy unloading of finished products and loading of raw materials in the retort - up to 5 minutes
8. Mobility. Charcoal kilns can be moved if its necessary.
9.Work without repairs. We give a guarantee for two years
10.Environmental cleanliness. No emissions into the atmosphere either before or after or during the production process
11.Extended range of plug-ins for the selection of excess heat - a wood drying, hot water boilers, waste incineration.
12.Low cost of equipment. Taking into account the calculation of the cost of a ton of charcoal produced per year, the price of charcoal kiln is the lowest in the world market.
Two years of operation have confirmed the reliability of our equipment
Parameters
Width -depth ?height 5680x2600x2690 mm
Weight 8500 kg
Productivity 30-55 tons per month
Guarantee 24 months
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers.
Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows.
The heating system is FANCOIL heaters connected to classical heating system.
Basic equipment convectors as follows:
• box (making possible options: fiberglass, metal powder-coated);
• copper-aluminum heat exchanger;
• flexible connection hoses with shut-off valves;
• tangential fans (in models with forced convection)
Optional equipment:
• oak grill or duralumin (different colors, roll or longitudinal)
• Electronic room thermostat;
• converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300);
• converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120);
• smooth speed control of fans.
Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting.
Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors:
• box of fiberglass-50 years
• box with powder coating 10 years
• wooden box (floor) - 2 years
• copper-aluminum heat exchanger 10 years
• aluminum grille-5 years
• wooden lattice - 1 year
• electrical parts - 5 years
• valves - 1 year
Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter.
Manufacturer of aluminum profile processing equipment, manufacturing and sales of broken aluminum doors and windows and plastic steel door and window processing equipment . To be satisfied with products, create a strong brand, internal plastic quality, and external image, with its high, precise, sophisticated and specialized operation mode, and good reputation, it has become a benchmark brand in the same industry at home and abroad.
One of our hot products:
High precision digital display double head aluminum profile extrusion cutting saw machine
Main features:
Main Features
1.Used for Aluminum profile high accurate Cutting
2.Imported Linear bearing system in moving and feeding device ensures the accurate the machine running and cutting, and stable performance.
3.Digital display system equipped can be easy readout the accurate cutting length and quantity automatically, ensures a high accurate re-load position and easy operation . 4.Pneumatic -hydraulic damp device ensured the saw blade stable feeding and working. 5.cutting angle change Automatic between 45° (outward)and 90°.
6.Imported carbide saw blade for a high quality cutting and long service life. 7.Automatic Safety system of shield can ensure the safe operation .
8.Spraying cooling system, make sure carbide saw blade long service life
Main Technical Parameters
Power supply: 380v 50Hz
Weight: 1400Kg
Motor power; 2*2.2KW
Cutting width max: 135mm
Motor rotary speed: 2800r/min
Cutting angle: 90° and 45° (outward)
Operation air pressure: 0.5~0.8Mpa Feeding speed 0~3m/min
Saw blades length: 370~4200mm
Saw blade specification: Φ500�Φ30�δ4.4mm Z=120
Air consumption: 60L/min
Dimension: 5500mmÃ?1750mmÃ?1990mm
Cutting height: 200mm�90°;190mm�45°
Wheat flour first grade/class is very popular among modern housewives. Its distinctive features include the presence of a small amount of ground shells of grains. By the way the number should not be more than 4%. Such an impurity has a direct effect on the color of the flour, since it has a yellowish tinge.
The dough prepared on the basis of wheat flour of the first grade, is obtained elastic, since it contains a large amount of gluten. Baking in the end turns out to be voluminous, fragrant and very tasty. It is recommended to use the flour of this sort in the production of non-flavored products, for example, pancakes, noodles, pies, etc. If you use this flour when making bread, the crumb will have a slightly gray tint. What is important is the baking, cooked on the basis of wheat flour of the first grade, remains fresh for a long time.
The use of wheat flour of the first grade is in the presence of shells of grain, which have a positive effect on the digestive system. It contains vitamin PP, which has the ability to regulate oxidative processes. There is also Vitamin H in this flour, which acts as a metabolic stimulant, as well as B-vitamins, important for restorative processes and for the work of the nervous system. The composition of wheat flour of the first grade includes a large number of minerals, which improve the course of metabolic processes.
Wheat flour of the first grade is used in cooking for the preparation of various confectionery and bakery products. In addition, it can be used as a thickener for a large number of sauces and sauces. You can also use flour for cooking batter.
We manufacture and constantly sell the next product:
Product: Wheat flour first grade/class.
Origin: Ukraine.
Packing: Paper bags of 1kg/2kg/3kg/5kg (net) and also polypropylene bags 25kg/50kg (net). Private label is possible.
Minimum order quantity: 1 20-ft container (23.5 tons net).
Payment terms: T/T for smaller orders and L/C for large order.
Delivery terms (according to Incoterms 2010):
- FCA Ukraine;
- DAF Ukrainian border (by rail in covered wagons of 68 tons net);
- FOB port Odessa, Ukraine (in 20 ft sea containers);
- CFR/CIF any destination city (by trucks).
- CFR/CIF any sea port of destination.
Inspection: All shipments are to be inspected (SGS), and tested before shipping by a world recognized authority as advised by the buyer. A buyer pays inspection (SGS).
We are interested in new customers and long-term cooperation.
12 Power Regulation Correction Suppliers
Short on time? Let Power Regulation Correction sellers contact you.
