Two-layered engineered flooring consists of a solid oak lamella 3,6 mm and 6 mm and birch plywood with increased moisture resistance plywood from WBP class plywood CP/C 12 mm and 15 mm.
T&G
Coating: oil-wask, lacquer
Width: 140/160/180/220 mm
Thickness: 15 or 21mm
Length: 400-2400 mm
Chamfer: 4-V
Grade: Select, Natur, Rustik
A parquet flooring consists of a single layer of oak. The parquet is available in width 70 mm and length from 250 mm to 450 mm in step 50 mm. Parquet is available without coating. Width: 70 mm Thickness: 22 mm Length: 250-450 mm Chamfer: no. Extra processing: optional (chamfer, thermo treatment). Grade: rustic, select, natur. Send us an email if you require any further information and price.
A solid wood flooring consists of a solid layer of oak or ash. Solid board is available with coating and without coating. T&G. Coating: Oil-wax, lacquer. Width: 140 mm. Thickness: 22 mm. Length: 800 mm. Chamfer: 4-V. Grade: rustic. Extra processing: optional (brashing, thermo treatment). Send us an email if you require any further information and price.
Company LLC "FanCoil Ukraine" specializes in producing and selling modern, cost-effective, high quality and easy to use equipment. Namely-floor convectors and underfloor TM FANCOIL. Our company has more than 10 years, is a competent and reliable partner for our customers.
Heating system FANCOIL - are water heaters based on natural or forced air circulation. Some models of the convectors used not only for heating, but also cooling. Also benefits convectors TM FANCOIL are very quiet operation, space-saving installation in the room, powered by a standard electrical outlet, the lowest temperature of the heated surface, moisture resistance, the use of valves and so on. Thanks to all the benefits, convector perfectly suited for installation under windows having panoramic glazing weatherstrip or low space under the doors, terraces, conservatories and indoor swimming pools, showrooms, business centers, residential cottages and apartments with panoramic windows.
The heating system is FANCOIL heaters connected to classical heating system.
Basic equipment convectors as follows:
• box (making possible options: fiberglass, metal powder-coated);
• copper-aluminum heat exchanger;
• flexible connection hoses with shut-off valves;
• tangential fans (in models with forced convection)
Optional equipment:
• oak grill or duralumin (different colors, roll or longitudinal)
• Electronic room thermostat;
• converter transformer 220v to 12v, with a built-smooth control fan speed (T35, TR-70, TR-150, TR-300);
• converter transformer 220v to 24v, with a built-smooth control fan speed (TR-30, TR-45, TR-75, TR-120);
• smooth speed control of fans.
Because of design features and requirements, availability of copper-aluminum heat exchangers, fans (for forced convection) - heating (or cooling) Improvement happens very quickly, unlike traditional steel or cast iron radiators. An advantage over the conventional radiators is that they contain 10 times less water resulting in heat convectors is not accumulated. Heating system heats FANCOIL almost instantly so you can quickly respond to changes in room temperature and maintain a constant level. Furthermore, even at a low temperature in heating convectors provide optimal heat transfer. These features allow you to reduce the load on heating equipment. Convectors provide a more uniform distribution of heat in the room, as opposed to steel and cast iron radiators that have a warmer zone is directly from the devices themselves. Even heat distribution prevents condensation and mold formation, and the use convectors facing windows to avoid misting.
Convectors TM FANCOIL produced in standard sizes as well as to the individual requirements of clients (radius, angle, etc.) All products are made from high quality materials, making available long warranty on parts convectors:
• box of fiberglass-50 years
• box with powder coating 10 years
• wooden box (floor) - 2 years
• copper-aluminum heat exchanger 10 years
• aluminum grille-5 years
• wooden lattice - 1 year
• electrical parts - 5 years
• valves - 1 year
Low pricing, flexible system of discounts and deadlines of manufacture and delivery of products do TM FANCOIL interesting and comfortable for both the individual user and for wholesale customers. List some objects equipped convectors TM FANCOIL, as well as the price of retail prices of products attached to the letter.
Dear Sir Madam
Our company, as the main exporter, with full responsibility are willing and able to enter in long-term cooperating with potential customers and we offer You our products bellow origin Ukraine :
1. Refined sunflower oil deodorized:
A4 paper 80g
1.size: A4(210*297mm)
2.gram:80/75/70gsm
3.brightness:102-104%
4.material:100% wood pulp
a4 paper 80g
New product under Paperon, makes your copy machines "Accelatration"
1. “Being mild”, within international trend of paper color, the natural whiteness prevents eyes from dizzling and pain in reading.
2. “Being smooth”, padded with calcium carbonate combined with non-pollution PC, the paper has more smoothness and better 3D effect.
3. “Being economic”, AKD 2-sides gluing makes the paper with perfect ink-absorption which can save expense from consumables.
4. “Being jam-free”, tight fiber structure prevents paper from jamming and curling during copying and suits for high speed copying.
5.” Being responsible”, As an eco-friendly enterprise, we make paper with farmed tree instead of forest tress and reduce emission of carbon dioxide .
Seven advantages:
1.Good feeding effect: Precise control on moisture during production guarantees the flattening of paper in copying and reduces jamming.
2.Distinct copying: Smooth surface makes for copying of original colors. The copy looks like originals.
3. Time saving and convenience: Paper is neatly and precisely cut with rotary engine. Paper does not adhere to each other. Jamming and double-feed happens less. Thus work time is saved.
4. Being white and bright: with high-quality material and advanced techniques, the paper is high in whiteness and brightness and improves distinctness in copying.
5. Longer working life of copy machines: neat cutting reduces the dust in paper. Smooth surface reduces the machines from wearing and maintaining.
6. Double-copying, and economic: high-quality material makes the paper with good opacity. Double-copying still has good effect.
7. 500 sheets in one ream: we guarantee 500 sheets of high quality paper in one standard ream.
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model - 3418+
¦a) thickness*width of the sheet ,mm 6,3*3150
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 11,8
Dimensions, mm 4000)1900)1700
Weight, kg 6200
Guillotine shears model -- 3316++
Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3316++
¦a) thickness*width of the sheet,mm 4,0*2500
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type manual
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 8,5
Dimensions, mm 3300)1630)1520
Weight, kg 3870
Guillotine shears model -- 3314+
Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/
The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3314+
¦a) thickness*width of the sheet,mm 2,5*1600
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type Manual/screw
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 3,2
Dimensions, mm 2300)1570)1470
Weight, kg 2000
Guillotine shears model -- 3416
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3416
¦a) thickness*width of the sheet, mm 4,0*2000
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 5,6
Dimensions, mm 2610)1600)1510
Weight, kg 2870
Guillotine shears model --478
Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-.
Specification
Maximum thickness, mm 16
Maximum width, mm 2200
Mains current 3 phases, AC
Frequency, Hz 50
Operating voltage, V 380
Stroke frequency 20
Engine power, KWt 30
Dimensions, mm 3150/2275/2350
Weight, kg 9800
Guillotine shears models --+ 3214
Model --+ 3214
¦a) thickness*width, mm 2,5*2500
Stroke frequency, p/min 33
Main drive,KWt 3
Dimensions, mm 3120)2000)1330
Weight, kg 1800
Crank metal sheet guillotine shears model --+ 6020
H6 * L2500mm
Designed for the sheet cutting with the thickness up to 6 mm.
Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/
Specification
Max cutting thickness, mm 6
Max cutting width, mm 2500
Stroke frequency, min-1 50
Power, KWt 8,5
Dimensions, mm 3400)1400)1450
Weight, kg 3650
23 Engineered Flooring Suppliers
Short on time? Let Engineered Flooring sellers contact you.
