Pressured polyethylene three-layer black/white hose (bag) - diameter 2, 7 m. Thickness 240 mkm lenght 60 m - can contain 200 tons of grain or silage outdoors just in fields during two years.
Length - 11.80mtrs.
Dia. - 1.82mtrs.
Wall thickness - 14mm.
Weight - 8mt./pipe.
The Pipes are spiral welded
The pipes external surface is plastic quoted.
The innner surface of the pipe is painted.
It consists of glass plastic material cores or basalt plastic material cores with the diameter from 4 to 40 mm, length up to 12 meters ( it might be rolled in a coils) with the ribbed surface of a spiral shape. The composite armature is intended for applying in concrete structures with the pre-stressed and non-stressed reinforcement instead of using the traditional steel armature.
Steel coil
Steel grade: st. 3ps
2 x 1000 x c û 390 mt
2 x 1250 x c û 130 mt
3 x 1000 x c û 260 mt
3 x 1250 x c û 130 mt
4 x 1000 x c û 130 mt
Total quantity: 1040 mt
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters.
Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass).
We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars.
For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin.
We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
A drawn brass rod of the round cross-section with a diameter of 135/200 mm
The brass rod� is made on a horizontal continuous casting machine on Verkhnidniprovsky Foundry and Mechanical Plant (Founded in 1898) is today the largest manufacturer and exporter of brass products in Ukraine. Many years of experience combined with progressive engineering personnel, and continuous implementation of advanced production technologies, ensure the highest quality of products that meet global requirements and standards.
The production capacity of the enterprise is more than 500 tons of brass rod per month of brands CW617N (58-2), CW608N (59-1), CW612N (59-2) or any other brass alloys at the request of the Customer. Our own spectral analysis laboratory guarantees the quality of the released alloys. Delivery routes to European countries, the USA, Canada, Turkey, etc. have already been established. They allow too quick and efficiently deliver the necessary volumes of cargo. The main components of brass alloys are copper and zinc, so the price of these raw materials directly affects the cost of brass rod. The information is provided to users for reference. A drawn brass rod of round cross-section with a diameter of 200mm.
Chemical Composition: Cu>60%, 1%>Pb>2.95%, Sn<1.5%, Fe<0,7%,Al<0,5%, Ni<1%, Si<0.3%, Mn,0,2%, other <1.5%, Zn is the rest.
Iron ore with Fe2O3 content 70%.
Fe2O3 - 70,03%, SiO2 - 22,08%, Al2O3 - 3,25%, P - 0,099%, FeO - 1,10%, CaO - 0,29%, MgO - 0,47%, TiO2 - 0,101%, MnO - 0,034%, S - 0,03%, Humidity - up to 5,00%.
Iron ore with Fe2O3 content 60%.
Fe2O3 - 60,29%, SiO2 - 35,54%, Al2O3 - 1,03%, P - 0,042%, FeO - 1,09%, CaO - 0,17%, MgO - 0,34%, TiO2 - 0,036%, MnO - 0,051%, S - 0,081%, Humidity - up to 5,00%.
As a further step we are ready to provide you with product samples via DHL courier service and arrive to your place for negotiations at any time convenient for you.
Glycerin (quality Category 3), fee human consumption, as typically UCO, typically meeting andguaranteeingcritical Quality parameters as follows:
- glycerol 75,0% min
- water 15.0% max
- ash content 7.5% max
- methanol 0.3% max
- mong 10 max
- KOH + sulfuric acid
Price is subject to calculation based on delivery place.
Wire of grades Sv-08G2S and Sv-08GS is used in shipbuilding, in car building, in boiler building, in assembly work, in construction for welding metal structures, in the automotive industry, in agricultural engineering.
For automatic and mechanized welding and surfacing of carbon and low-alloy structural steels in shielding gases (DSTU EN ISO 14175): carbon dioxide (DSTU 4817), argon (DSTU GOST 10157) and a mixture of carbon dioxide and argon, submerged arc welding (DSTU EN ISO 14174).
Wire grades Sv-08G2S and Sv-08GS are used in shipbuilding, car building, boiler building, installation work, construction for welding metal structures, the automotive industry, and agricultural engineering.
Chemical composition, % (steel grade Sv-08G2S)
Manganese: 1.80-2.10;
Carbon: 0.05-0.11;
Silicon: 0.70-0.95;
Chrome, no more: 0.2;
Nickel, no more: 0.25;
Sulfur, no more: 0.025;
Phosphorus, no more: 0.03.
FULL NAME - DAVA BALANCE Eco-dishwasher with glycerin, 500g
DESCRIPTION - Contains glycerin, which moisturizes and softens the skin, restoring its elasticity and smoothness.Dermatologically tested, allergen-free, recommended for people with sensitive skin, washing baby dishes, cleaning vegetables and fruits from wax, paraffin and earth. Certified according to the international standard ISO14024. The unique eco-formula of the product does not dry the skin of the hands, does not damage the nails, does not irritate the respiratory tract, while the powerful flora components will cope with the most difficult and greasy pollution even in cold water, leaving no smell. Safe for the environment, biodegradable, free of phosphates, parabens, chlorine, dyes and fragrances. Suitable for washing any utensils and different surfaces of glass, ceramics, stone and metal.
MGC RAIL LLC expresses you our respect and addresses the following request. Our company offers for further export Aluminum ingots A7 (country of origin - China).
In order to coordinate with manufacturers in China and provide you with a detailed price offer, please send a short request with the following data:
name and details of your company;
port of delivery;
required volume of goods per month / per year;
terms of payment.
1434 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
