Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers.
Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined.
Advantages
Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec).
It can provide irrigation without erosion in slopped lands.
Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented.
Ideal irrigation system in the soils with low depth and (shallow) permeable soils.
At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain.
Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high.
Since there is no need for field ditches, planting area increases and agricultural works can easily be operated.
Vegetables, citrus, vineyards and other orchards can be protected from frost and heat.
Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work
Areas of Usage
It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards.
Things to take into account
While carrying, it should not be lifted and thrown. Clamps and clips can be broken.
It can stay under solar rays and be used in the fields during summer. No problem is observed.
Pipes should be stored at the possible temperatures between +5°C and +45°C.
Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed.
High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty
CONSTMACH manufactures cement silos which has stock capacity from 30 to 3.000 tonnes as welded and bolted types.
3.000 tonnes capacity cement silos are used especially in cement terminals, cement factories and also concrete batching plants.
Our cement silos are equipped with air filters, screw conveyors, loading belows, pressure safety valves, level indicators, air nozzles and other silo accessories.
In addition to silo accessories, guardrails according to CE standards, manholes, ladders, charging pipes, maintenance platforms are present on our silos.
Parts of bolted type cement silos are manufactured by sensitive laser cutting and drilling methods. In jobsite, parts of cement silos can be assembled easily and sensitively.
1. SILO CAPACITY: 3.000 Tonnes
2. HEIGHT:29.000 mm
3. WIDTH: Ã? 12.400 mm
4. Number of footings: 16
5. SILO OUTLET: Ã? 400 mm
6. SILO WEIGHT: 135.000 kg
7. SILO LEG MATERIAL : Ã? 323 x 12 mm STEEL PIPE
8. FOOT CROSS BARS ARE PRODUCED AS NPL 80mm STEEL PROFILE.
9. LEG BASES ARE PRODUCED FROM 20-25 mm SHEET METAL
10. CONICAL PART IS PRODUCED FROM 10 mm METAL SHEET.
11. MAIN BODY IS PRODUCED FROM 10-8-6 mm METAL SHEET.
12. TOP COVER IS PRODUCED FROM 6 mm METAL SHEET.
13. SILO CONTAINS AN OUTSIDE DECK LADDER WHICH STARTS FROM THE BASE AND ENDS IN THE TOP COVER.
14. SILO HAS A GUARD RAIL AROUND THE TOP COVER.
15. FILLING PIPE IS 4â??â?? AND HAS EXTENTON WHICH CAN BE EXTENDED TO THE BASE FOOTING.
17.ALL NECESSARY STATISTICS WERE CALCULATED FOR THE SILOS AND THEY ARE PODUCED BASED ON APPROVED DESIGNS.
ï?· Our door frame and architraves have porduced from pvc raw material, and covered with 0,20 mm PVC Foil.
ï?· Door Sashes can produce 4 types and both side of door sashes pressed with 1,8 mm pvc sheet.
a) Wooden door stile honeycomb filler,
b) Wooden door stle eps filler,
c) Wooden door stile particle board filler (fire proof)
d) Pvc door stile eps filler
Door sashes tickness is 38 mm.
ï?· Our doors have features such as ;
ï?· Durable,
ï?· Astetic,
ï?· Antibacterial,
ï?· Mouster resistant,
ï?· Water proof,
ï?· B1 fire resitance,
ï?· anti-scratch,
Does not require painting and additional care and can fix esaily
inova Cooling always aims to be a reliable company for its customers in the cooling industry.
To be a reliable company in the international trades.
To identify the right products meeting the customer needs and to avoid wrong purchases.
To ensure purchasing the right product for the right price.
To ensure the delivery at the place in time on the agreed date.
To ensure delivery of the product in the desired physical conditions.
To ensure the continuity of the products.
To follow up innovations and the technology.
We have been producing cold storage doors since 2007 with trade partners in 15 countries and about 50 employees. Various sizes of projects, many of which are cold storage doors, have achieved great success worldwide.
Our working facilities in the factories and the great block capacity in our own quarries enable us to offer you the followings such as ;
-premium quality travertine block/slab/sized/tile
The jaw crusher is one of our product groups capable to crush easily even the hardest material and the hydraulic system enables the easily and rapidly adjustment of the jaw capacity in accordance withy the product volume, if you wish to lift a material from the machine.
It is also possible to use the high capacity primary impact crusher from our products range for primary and secondary applications. Thanks to the exchangeability of the wearing parts, the extension of machine’s utilization life and handling-convenience is ensured. Further, through the hydraulically open-able case also an ease and rapid maintenance facility is ensured. This product group designed in order to supply you a facile services, is suitable for lifting materials of any hardness.
392 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
