Oven-dried 1st Class Beech Wood Skeleton. Due To The Natural Structure Of The Tree, The Colors Of The Products And The Patterns Seen On The Surface May Vary. Changes In The Physical Structures Of Wooden Materials Depending On Environmental Conditions Can Be Controlled By Proper Maintenance And Use For Many Years Is Possible.
Environment And Human Health Friendly Water-based Polish Is Used.
*UPHOLDER
Inner Lined And Outer Fabric Can Be Removed And Washed With Zipper. Note: Depending On Your Order, We Have Different Color Applications. *the Product Is Shipped Unassembled In 1 Package *the Assembly Diagram And All Accessories Required For Assembly And The Accessory Bag With The Tightening Apparatus Are Shipped In The Product Box.
PRODUCT DIMENSIONS
HEIGHT: 92 CM
WIDTH: 66 CM
DEPTH: 90 CM
Product Type: 3-Piece Nesting Table Set
Color: Marble patterned top table - natural wood leg
Table Shape: Octagonal Table Material: 18 mm melamine coated chipboard
Leg Material: Natural wood hornbeam
Usage Type: Side by side - interlocking structure
Installation: Easy and practical, sent with all the accessories
Product Dimension Table: Top
Table Diameter: 33cm
Height: 49cm
Middle Table Diameter: 33cm
Height: 45cm
Bottom Table Diameter: 33cm
Height: 41cm
Triple Special Design 3-Piece Nesting Table Top table diameter: 34cm.
Leg height: 48cm.
Middle table diameter: 34cm.
Leg height: 45cm Bottom table diameter: 34cm.
Leg height: 42cm Our products are sent disassembled in their special boxes.
Product legs are specially produced from 100% natural 1st Class wood material.
Top table is 18 mm thick, produced using 1st Class chipboard.
It has TSE, European Union EN, ISO 9001 certificates.
It does not contain carcinogenic substances within E1 Standards.
The edges are covered with 1st Class 0.40mm PVC tape.
There may be differences in color tone and pattern due to the natural structure of the tree used for the leg.
The accessory bag required for assembly materials is sent in the box with the product. The apparatus that will hold the legs is plastic with nuts and will be mounted to the table by the user with a screw. You can easily mount the legs of the coffee table in place by turning them with your hand.
We, as SESA, continue to strengthen our position in domestic and international markets thanks to our recyclable or compostable packaging product range in which we prioritize our sensitivity to the environment and nature, from resource usagee to production, service and design.
We, as SESA, can produce environmentally compatible packaging which can meet all requirements under a wide range of products in line with the demands of our esteemed clientile.
PE/PE recyclable products with and without barrier
PE/PE Recyclable without barrier
We have the capacity to produce reel-formed and doypack bags in both structures.
Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers.
Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined.
Advantages
Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec).
It can provide irrigation without erosion in slopped lands.
Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented.
Ideal irrigation system in the soils with low depth and (shallow) permeable soils.
At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain.
Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high.
Since there is no need for field ditches, planting area increases and agricultural works can easily be operated.
Vegetables, citrus, vineyards and other orchards can be protected from frost and heat.
Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work
Areas of Usage
It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards.
Things to take into account
While carrying, it should not be lifted and thrown. Clamps and clips can be broken.
It can stay under solar rays and be used in the fields during summer. No problem is observed.
Pipes should be stored at the possible temperatures between +5°C and +45°C.
Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed.
High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty
Platform lift
The EPL 2000 is designed to definitively resolve the problems of working on tyres of any type of truck or van. The lifting system is entirely pneumatic with a mechanical safety device that prevents accidental total descent (even without air pressure).
The lift has a solid structure that ensures the complete stability of the raised vehicle.
The climbing ramps can be removed to facilitate balancing operations with wheels mounted, and
It has a stopping level to assist operators positioning the vehicle before lifting.
The pedal control allows the platform to be stopped at the required height when moving
Either up or down. Equipped with 4 arms (optional) for large vehicles.
Ax. Capacity / maximum kapasite3000kg]
Working pressure / cal¦sma bas¦nc¦10 v 12 bar
Net weight w/o ramps / net ag¦rl¦k ( rampalar haric)320kg
Ramps / rampalar150 kg
Maximum raise / azami yukseklik400mm
Width / en1370mm
Length / uzunluk2400mm
Height / yukseklik 140mm
Case size, lift / sand¦k olculeri, lift1450 x 2150 x 350 mm
Case size, ramps / sand¦k ˜ltnleri, rampalar500 x 1200 x 500 mm
Net weight w/o ramps / net agirlik ( rampalar haric)320kg
Ramps / rampalar150 kg
Maximum raise / azami yukseklik400mm
Width / en1370mm
Length / uzunluk2400mm
Height / yukseklik 140mm
Case size, lift / sand¦k olculeri, lift1450 x 2150 x 350 mm
Case size, ramps / sand¦k ˜ltnleri, rampalar500 x 1200 x 500 mm
Automatic tyre changer
Automatic tyre changer for 10 û 22 ( inside locking 12 -22, outside locking 10 û 20) wheels complete with automatic lubricator, tyre lever, plastic protection for bead breaker blade 230/400v. 50hz three phase motor, with pneumatic tilting back vertical positions, with pneumaticly operated system which locks the mounting/demounting tool 3mm. Away from the rim edge, with inflating gun.
Optional : tubeless tyres inflating device from slides with pedal control and air tank.
Working pressure 8 û 12 bar
Bead breaker force2500 kg.
Working voltage380v three-phases
Working voltage (optional)220v single-phase
Motor power1, 1 kw- 1, 5 hp / 1500 rpm
Weight235kg
Width845mm
Dept1030mm
Height1950mm
Plate height780mm
Max. Wheel diameter1000mm
Wheel width3 û 12
This unique machine is used to correct and straighten all kinds of
Defected steel and alloy rims
Mechanic motor 0, 55 kw, 1400 rpm, 0, 75hp,
7.3 ampere, 3 phase - single phase, 220v - 380 v
Hydraulic motor 0, 55 kw 900 rpm, 0, 75hp,
8.7 ampere, 3 phase - single phase, 220v - 380 v
Sound level 35 db
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while working on our rsm1800 / rsm2200 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pcs (mihengir) metal pointer
3. 6 pcs press tips
4. 3 pcs support axis for press tips
5. 1 pcs lever
6. 1 pcs lathe pen
7. 1 pcs upper support
8. 1 pcs lower support
9. 4 pcs support pins
10. Flange nuts and bolts
Optional accessories list
1. S1, ac motor drive (speed control unit)
2. Mmp150, magnetic metal pointer
This unique machine is used to correct and straighten all kinds of defected steel and alloy rims
Mechanic motor 0, 55 kw, 1400 rpm, 0, 75hp, 7.3 ampere, 3 phase - single phase, 220v - 380 v
Hydraulic motor 0, 55 kw 900 rpm, 0, 75hp, 8.7 ampere, 3 phase - single phase, 220v - 380 v
Sound level 35 db
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while working on our rsm1800 / rsm2200 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pcs (mihengir) metal pointer
3. 6 pcs press tips
4. 3 pcs support axis for press tips
5. 1 pcs lever
6. 1 pcs lathe pen
7. 1 pcs upper support
8. 1 pcs lower support
9. 4 pcs support pins
10. Flange nuts and bolts
Optional accessories list
1. S1, ac motor drive (speed control unit)
2. Mmp150, magnetic metal pointer
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as
Radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while
Working on our rsm2200 / rsm2400 / rsm2600 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pc (mihengir) metal pointer
3. 6 pcs press tips (in different forms)
4. 3 pcs support axis for press tips
5. 1 pc lever
6. 1 pc lathe pen
7. 1 pc upper support
8. 1 pc lower support
9. 4 pcs support pins
10. Flange nuts and bolts
Mechanic motor 0, 55 kw, 1400 rpm, 0, 75 hp - 7, 3 ampere, 3 phase - single phase // 380 v - 220 v
Hydraulic motor 0, 75 kw, 900 rpm, 1 hp - 8, 7 ampere, 3 phase - single phase // 380 v - 220 v
Sound level 45 db
Hydraulic piston power
Total pressure = ðr2 x 160 (working pressure bar)
Total pressure = 3, 14* (3, 15 x 3, 15) = 31, 156kg
Total pressure = 31, 156 x 160 = 4 984, 96kg
Diameter of piston cylinder we used is 63mm which comes to as radius 3, 15 cm.
As you have seen above formula you can have 5 tons of total pressure while
Working on our rsm2200 / rsm2400 / rsm2600 machines.
Standard accessories list
1. 18 pcs rim attaching center
2. 1 pc (mihengir) metal pointer
3. 6 pcs press tips (in different forms)
4. 3 pcs support axis for press tips
Cotton and polycotton grey fabrics, cotton yarn, soccer and volleyballs, jogging suits and Turkish traditional clothes from our mills in Turkey.Market search
