Apex APX 1KM Smart Inverter 12V 60A MPPT
Nominal Output Power 1000 Watt
Villa
Output Waveform
Pure Sine Wave
Detached House
Output Voltage
230V
Container
Output Frequency
50Hz-60Hz
Tiny House
Efficiency
99%
Bungalow
DC Input Voltage
12V DC
Office and Businesses
MPPT
60A
Commercial Enterprises
Rated Power
1000 Watt
Milk Milking Units
Maximum PV Input
800 W / 50V DC
Beekeepers
Operating Temperature
0- 40 Degrees
Noise Level
45dB
Warranty
2 Years
What is a Smart Inverter?
A smart inverter goes beyond traditional inverter functions; it features two-way communication with the grid, remote monitoring/configuration, energy optimization, load management, and advanced protection capabilities.
Traditional inverter: Only converts DC to AC.
Smart inverter: In addition to conversion, it provides greater control and data over grid and/or battery management through advanced software and hardware integration.
Especially preferred in renewable energy installations (solar, wind), grid-tied (on-grid), or hybrid systems to increase energy efficiency and reliability.
What Does It Do?
Two-Way Communication and Control
Interacts smartly with the grid: monitors grid voltage, frequency, and power demands, adjusts reactive power when necessary.
Remote access allows viewing, updating, and managing operating parameters without being on-site.
Energy Management and Optimization
Automatically manages battery charge/discharge for optimal efficiency.
Real-time system optimization based on production-consumption balance,
Advanced Protection and Fault Diagnosis
Ensures safe shutdown during sudden grid failures or fluctuations (e.g., anti-islanding).
Sends automatic alerts and records data during faults.
Remote Monitoring and Reporting
Provides real-time production, consumption, charge-discharge, temperature, etc. data via mobile app or web interface.
Reports allow long-term performance evaluation.
How Does It Work?
Input Stage (DC or Grid)
Can accept DC input from solar panels or wind turbines.
Designed also to manage energy coming from the grid (AC).
Energy Conversion and Monitoring
Converts DC power to AC while simultaneously performing real-time measurements with built-in sensors and software algorithms.
Monitors grid parameters (voltage, frequency), panel/battery voltage, temperature, etc., to find the optimal operating point.
Battery Management (In Hybrid Models)
Communicates with the Battery Management System (BMS) if a battery bank is present
Adjusts charge/discharge strategy based on instantaneous consumption, grid constraints, energy tariffs, or weather forecasts.
Communication Interfaces
Uses protocols like RS485, Wi-Fi, Ethernet, ZigBee to record, monitor, or control inverter data.
Grid operators or users can remotely access the inverter for updates or setting changes.
Grid Interaction
Real-Time Power Adjustment: Balances power fed to or drawn from the gr
Expandable Power OptionsWith power options of 5000W and above you can easily expand your system and customize it according to your needs
This flexibility allows you to grow your system to meet future energy demands
2 Year WarrantyProtected by a comprehensive 2year warranty providing you with longterm assurance and peace of mind
HighQuality Electronic ComponentsOur product is equipped with highquality electronic components offering durability and reliability
Advanced Power QualitySmart inverters provide superior power quality that ensures connected devices operate more safely and smoothly
Efficient MPPT AlgorithmsAdvanced MPPT algorithms maximize energy efficiency from solar panels thereby increasing energy production and reducing costs
Dynamic Power ManagementThe dynamic power management feature automatically adjusts according to energy production and consumption demands efficiently directing excess energy or transferring it to energy storage systems
High Efficiency RateThe smart inverter minimizes energy losses by utilizing energy at maximum efficiency
Automatic Voltage RegulationThe device automatically corrects voltage fluctuations and ensures the system always operates at optimal performance
High Protection CapabilitiesProvides effective protection against high voltage and currents coming from solar panels
Prevents reverse connections and excessive power output delivering safe and longlasting performance
APEX Eco Series 5.5 kW 48V MPPT Off-Grid Smart Inverter Get Your Power From the Sun!
Manage Solar Energy with Smart TechnologyThe Apex Eco 5.5 kW inverter is specifically designed for 48V battery systems, featuring MPPT (Maximum Power Point Tracking) technology, pure sine wave output, high performance, and off-grid operation. This device efficiently utilizes the energy obtained from solar panels to both charge batteries and supply your electrical appliances with 220V AC power.
It is an ideal energy management solution for agricultural lands, country houses, caravans, container buildings, and tiny house projects.
What is the Apex Eco 5.5 kW Inverter?This product acts as the brain of the solar panel + battery + inverter system. Thanks to the high-efficiency MPPT solar charge controller on board, it maximizes the use of solar energy. The 48V system voltage results in lower current, reducing cable losses, thereby enabling a safer and more economical system setup.
What Does the Apex 5.5 kW Inverter Do?
Converts solar energy into electricity
Efficiently charges batteries
Provides power for off-grid living spaces
Has the capacity to run high-power devices
Offers a large LCD screen to view all system parameters
Where Is It Preferred?The Apex 5.5 kW smart inverter is frequently preferred in the following applications:
Solar-powered home systems
Tiny house energy systems
Caravan electrical infrastructure
Agricultural irrigation and equipment electrificatio
Uninterruptible power supplies for security systems
The APX Pro 4.2 kW Hybrid Smart Inverter is an advanced solution developed to deliver maximum efficiency in both off-grid and on-grid solar power systems. Operating at 24V DC, this inverter can run without batteries, allowing your system to function solely with solar panels or directly transfer energy to the grid. This not only saves energy but also provides an opportunity to earn income through net metering.
High Voltage Support and Broad Compatibility
With a 500V DC input capacity, the device qualifies as a high-voltage inverter, enabling longer panel strings. This reduces installation costs and increases system flexibility. Its advanced lithium battery communication support ensures full compatibility with LiFePO4 and other smart battery types, making battery management safer and more efficient.
Smart Control and Remote Access
With the optional WiFi module, you can monitor your inverter remotely and track your energy production data in real time via mobile devices. The advanced monitoring features make it easy to analyze your system's performance.
Key Features:
24V DC system support Battery-free operation (PV Load / PV Grid) Grid-tied energy export capability (net metering compatible) 500V DC high-voltage solar input
Lithium battery communication support
Optional WiFi connectivity
Advanced MPPT solar charge control Easy installation and user-friendly interface
Application Areas: Residential solar energy systems, camper and caravan systems, commercial enterprises, agricultural irrigation systems, and projects for energy export
Communication Port: None
Parallel Connection: Yes (Max. 4 sets)
Series Connection: Yes (Max. 4 sets)
Dimensions (mm): 532 206 214Weight: 20 kg
Warranty Period: 3 Years
The 200Ah lithium battery, which provides high performance in every area where powerful, durable, and long-lasting energy solutions are needed, has become an indispensable part of modern energy systems. Produced with LiFePO4 (Lithium Iron Phosphate) technology, this battery offers a safe and efficient energy storage option. Compared to traditional lead-acid batteries, it is significantly lighter and provides advantages such as fast charging and high discharge performance.
The 12.8-volt 200Ah lithium battery can be safely used in a wide range of applications such as caravans, boats, off-grid solar energy systems, tiny house projects, mobile workstations, and backup power systems. It is an ideal solution for users who require constant energy in these areas. Moreover, thanks to its low internal resistance, it delivers higher efficiency with less energy loss.
With its long cycle life and maintenance-free design, this user-friendly battery delivers stable performance even during sudden power demands. Thanks to the integrated BMS (Battery Management System) technology, it provides full protection against risks such as overcharging, over-discharging, high temperature, and short circuits. This ensures the battery is both safer and longer-lasting.
Manufactured under the NP Power brand, this model is equipped to meet the energy needs of both individual and commercial users. From solar energy systems to marine applications, it offers a wide range of uses and serves as a reliable backup power solution against energy outages.
Additionally, you can visit our lithium battery product category right now by clicking the link and explore our range of products with different features to find the most suitable solution for your needs.
ML Series 20A MPPT Solar Charge Controller Technical Specifications Table
Technical Specification
Value
Model
ML2420
Nominal System Voltage
12V 24V Auto Detection
Nominal Charge Current
20A
Maximum PV Input Voltage
100V DC
Maximum PV Input Power
260W 12V 520W 24V
Charge Type
MPPT Maximum Power Point Tracking
Charge Stages
Bulk Absorption Float
Battery Compatibility
Lead Acid Gel AGM Lithium LiFePO4
Charge Efficiency
98
Operating Temperature
25C 45C
Display
LCD Display Keypad
Cooling System
Natural Airflow
Housing Material
Heatresistant ABS Plastic
Dimensions mm
205 x 151 x 68
Weight
065 kg
Communication Interface
RS485 Modbus supported
Protection Class
IP32
Protection Features
Overvoltage short circuit reverse polarity temperature control
ML2420 20A MPPT Solar Charge ControllerThe Electrozirve ML2420 MPPT 20A Solar Charge Controller is a professional energy management solution developed to deliver maximum efficiency in solar energy systems Using MPPT technology it captures the optimum power from the solar panel and transfers it to the battery providing up to 98 energy efficiency
This device automatically operates with 12V and 24V systems supports a maximum 100V DC solar panel input voltage and can handle 260W 12V 520W 24V PV power Featuring an LCD screen and RS485 communication port it offers smart monitoring capabilities It is fully compatible with all battery types including LiFePO4 lithium batteries
This controller is an ideal choice especially for caravans tiny house systems cottages irrigation systems mobile energy needs and small businesses
Advantages
Up to 30 more efficiency with MPPT technology
High PV voltage support 100V DC
Compatible with all battery types including LiFePO4
Integration with automation systems via RS485 Modbus
Detailed charge tracking via LCD display
Safe operation with comprehensive protection features
Silent and compact design without a fan
Applications
Tiny house and caravan systems
Mountain houses cottages rural living areas
Garden irrigation and agricultural watering systems
Camera and security systems
Mobile sales points and vehiclemounted systems
Offgrid small businesses
Warranty PeriodThe Electrozirve ML2420 MPPT 20A Solar Charge Controller is covered by a 2year warranty under Electrozirves assurance During the warranty period technical support spare parts and service are provided to the user
ML Series 30A MPPT Solar Charge Controller Technical Specifications Table
Technical Specification
Value
Model
ML2430
Nominal System Voltage
12V / 24V Auto Detection
Nominal Charge Current
30A
Maximum PV Input Voltage
100V DC
Maximum PV Input Power
390W (12V) / 780W (24V)
Charge Type
MPPT (Maximum Power Point Tracking)
Charge Stages
Bulk, Absorption, Float
Battery Compatibility
Lead Acid, Gel, AGM, Lithium (LiFePO4)
Charge Efficiency
98%
Operating Temperature
-25C ~ +45C
Display
LCD Display + Keypad
Cooling System
Natural Airflow
Housing Material
Heat-resistant ABS Plastic
Dimensions (mm)
205 x 151 x 68
Weight
0.75 kg
Communication Interface
RS485 (Modbus supported)
Protection Class
IP32
Protection Features
Overvoltage, short circuit, reverse polarity, temperature control
ML2430 30A MPPT Solar Charge ControllerThe Electrozirve ML2430 MPPT 30A Solar Charge Controller is a professional energy management solution developed to deliver maximum efficiency in solar energy systems. Using MPPT technology, it captures the optimum power from the solar panel and transfers it to the battery, providing up to 98% energy efficiency.
This device automatically operates with 12V and 24V systems, supports a maximum 100V DC solar panel input voltage, and can handle 390W (12V) -780W (24V) PV power. Featuring an LCD screen and RS485 communication port, it offers smart monitoring capabilities. It is fully compatible with all battery types including LiFePO4 lithium batteries.
This controller is an ideal choice especially for caravans, tiny house systems, cottages, irrigation systems, mobile energy needs, and small businesses.
Advantages
Up to 30% more efficiency with MPPT technology
High PV voltage support (100V DC)
Compatible with all battery types including LiFePO4
Integration with automation systems via RS485 Modbus
Detailed charge tracking via LCD display
Safe operation with comprehensive protection features
Silent and compact design without a fan
Applications
Tiny house and caravan systems
Mountain houses, cottages, rural living areas
Garden irrigation and agricultural watering systems
Camera and security systems
Mobile sales points and vehicle-mounted systems
Off-grid small businesses
Warranty PeriodThe Electrozirve ML2430 MPPT 30A Solar Charge Controller is covered by a 2-year warranty under Electrozirve's assurance. During the warranty period, technical support, spare parts, and service are provided to the user
ML Series 40A MPPT Solar Charge Controller Technical Specifications Table
Technical Specification
Value
Model
ML2440
Nominal System Voltage
12V 24V Auto Detection
Nominal Charge Current
40A
Maximum PV Input Voltage
100V DC
Maximum PV Input Power
520W 12V 1040W 24V
Charge Type
MPPT Maximum Power Point Tracking
Charge Stages
Bulk Absorption Float
Battery Compatibility
Lead Acid Gel AGM Lithium LiFePO4
Charge Efficiency
98
Operating Temperature
25C 45C
Display
LCD Display Keypad
Cooling System
Natural Airflow
Housing Material
Heatresistant ABS Plastic
Dimensions mm
205 x 151 x 68
Weight
085 kg
Communication Interface
RS485 Modbus supported
Protection Class
IP32
Protection Features
Overvoltage short circuit reverse polarity temperature control
ML2440 40A MPPT Solar Charge ControllerThe Electrozirve ML2440 MPPT 40A Solar Charge Controller is a professional energy management solution developed to deliver maximum efficiency in solar energy systems Using MPPT technology it captures the optimum power from the solar panel and transfers it to the battery providing up to 98 energy efficiency
This device automatically operates with 12V and 24V systems supports a maximum 100V DC solar panel input voltage and can handle 520W 12V 1040W 24V PV power Featuring an LCD screen and RS485 communication port it offers smart monitoring capabilities It is fully compatible with all battery types including LiFePO4 lithium batteries
This controller is an ideal choice especially for caravans tiny house systems cottages irrigation systems mobile energy needs and small businesses
Advantages
Up to 30 more efficiency with MPPT technology
High PV voltage support 100V DC
Compatible with all battery types including LiFePO4
Integration with automation systems via RS485 Modbus
Detailed charge tracking via LCD display
Safe operation with comprehensive protection features
Silent and compact design without a fan
Applications
Tiny house and caravan systems
Mountain houses cottages rural living areas
Garden irrigation and agricultural watering systems
Camera and security systems
Mobile sales points and vehiclemounted systems
Offgrid small businesses
Warranty PeriodThe Electrozirve ML2440 MPPT 40A Solar Charge Controller is covered by a 2year warranty under Electrozirves assurance During the warranty period technical support spare parts and service are provided to the user
Shiner 30A MPPT Solar Charge Controller Technical Specifications
Feature
Value
Model
Shiner 30A
Nominal System Voltage
12V 24V Auto Recognition
Maximum Charging Current
30A
Maximum Input Voltage PV
100V DC
Maximum PV Input Power
390W 12V system 780W 24V system
Charging Type
MPPT Maximum Power Point Tracking
Charging Efficiency
98
Battery Compatibility
Lead Acid Gel Lithium LiFePO4
Display
LCD Screen Indicator
Operating Temperature
20C 55C
Protection Class
IP32
Cooling
Natural Air Flow no fan
Dimensions
180 x 118 x 45 mm
Weight
065 kg
Protection Features
Overvoltage short circuit reverse polarity temperature control
Shiner 30A MPPT Solar Charge ControllerShiner 30A MPPT Solar Charge Controller is a highperformance smart energy management unit developed to maximize efficiency in solarpowered systems Using MPPT technology it utilizes energy from solar panels in the most efficient way and charges your batteries quickly and fully With up to 98 efficiency it ensures you get maximum energy from solar energy systems
Compatible automatically with 12V and 24V systems this device supports PV input voltage up to 100V and works seamlessly with lead acid gel and LiFePO4 lithium batteries Thanks to its LCD screen system information can be monitored instantly It is widely used in applications such as tiny houses caravans country houses and rural electrical systems
Usage Areas
Tiny house and caravan energy systems
Country houses summer houses hobby gardens
Farms with 12V24V solar systems
Solarpowered irrigation systems
Camera systems and lighting
Energy support in mobile commercial vehicles
Advantages
30 more efficiency compared to PWM devices thanks to MPPT technology
Compatibility with various solar panel configurations thanks to 100V PV input
High current output 30A for use in more powerful systems
Support for lead acid gel and lithium batteries
Realtime system monitoring via LCD screen
Compact size and silent operation without fan
Comprehensive protection features short circuit reverse connection overvoltage temperature
 Usage Instructions
Solar panel connection Connect to input terminals observing correct polarity
Battery connection Connect your lithium gel or lead acid battery at the correct voltage
The device automatically recognizes the system and starts the charging process
All values and warnings can be monitored via the LCD screen
Shiner 20A MPPT Solar Charge Controller Technical Specifications
Feature
Value
Model
Shiner 20A
Nominal System Voltage
12V 24V Auto Detection
Maximum Charge Current
20A
Maximum Input Voltage PV
100V DC
Maximum PV Input Power
260W for 12V system 520W for 24V system
Charge Type
MPPT Maximum Power Point Tracking
Charge Efficiency
98
Battery Compatibility
Lead Acid Gel Lithium LiFePO4
Display
LCD Display Indicator
Operating Temperature
20C 55C
Protection Class
IP32
Cooling
Natural Air Flow fanless
Dimensions
180 x 118 x 45 mm
Weight
055 kg
Protection Features
Overvoltage short circuit reverse polarity temperature control
Shiner 20A MPPT Solar Charge ControllerThe Shiner 20A MPPT Solar Charge Controller is a highperformance and smart energy management unit developed to ensure maximum efficiency in solar power systems With MPPT technology it uses the energy from solar panels in the most efficient way and charges your batteries quickly and fully Thanks to up to 98 efficiency it enables maximum energy harvest from solar power systems
Compatible with both 12V and 24V systems this device supports PV input voltages up to 100V and works seamlessly with leadacid gel and LiFePO4 lithium batteries Its LCD screen allows realtime monitoring of system information It is widely used in applications such as tiny houses caravans cottages and rural electrical systems
Applications
Energy systems for tiny houses and caravans
Cottages mountain houses hobby gardens
Farms with 12V24V solar systems
Solarpowered irrigation systems
Camera systems and lighting
Energy support in mobile commercial vehicles
Advantages
MPPT technology offers up to 30 more efficiency compared to PWM devices
100V PV input allows compatibility with various solar panel configurations
High current output 20A suitable for medium power systems
Supports leadacid gel and lithium batteries
Realtime system monitoring via LCD screen
Compact size and silent operation without a fan
Comprehensive protection features short circuit reverse polarity overvoltage temperature protection
 Usage Instructions
Connect solar panels to the input terminals observing correct polarity
Connect your lithium gel or leadacid battery at the correct voltage
The device automatically detects the system and starts the charging process
All values and alerts can be monitored on the LCD screen
Note Always connect the battery first to avoid damage to the device
100Ah 12.8V Lithium LiFePO4 Battery NP Power â?? Technical SpecificationsYou can review the technical specifications of the NP Power 100Ah lithium battery in the table below. Additionally, you can explore our full range of lithium battery products via the provided link.
100Ah 12.8V Lithium LiFePO4 Battery NP Power
For those seeking long-lasting, lightweight, and high-performance energy storage, the 100Ah 12.8V Lithium NP Power battery stands out with its advanced cell technology and safety features. Compared to traditional lead-acid batteries, this product offers a much higher cycle life, is user-friendly with up to 100% discharge capability, and supports fast charging. The built-in BMS (Battery Management System) provides full protection against overcharging, over-discharging, short circuits, and extreme temperatures.
The 100Ah lithium battery enhances the sustainability and safety of your system while saving space. Its compact design makes it easy to transport and install.
It is ideal for caravan power systems, boat and marine applications, tiny house solutions, off-grid houses, solar power systems, backup energy systems, and mobile energy projects. It offers a reliable power source for long-term campers or those living off the grid.
Manufactured to high quality standards, this battery is suitable for both individual users and professional systems. With its silent operation, maintenance-free des
cable trays managements
AMF seriels
standards and heavy duty cable trays
trunks
ladders
covers and accesories and all hardware needed.
Hot Dipped Galvanized and P. Galvanized all available
Walnut Executive Office Set, even if time passes, will not be outdated and will always protect the eyewitnesses is a group of Walnut Classic Authority. The classic lines will create a nostalgic atmosphere in your wooden design office combined with the special production leather while giving you the snapshots from the past. 180 cm. width and 85 cm. Walnut Classic Executive Set with 3-piece leather, solid foot and edge, cnc and front-screened walnut.
Falmer has been an approved supplier of the United Nations World Food Programme (WFP) for many years with its international quality certificates and assurance and modern management approach with the supplier it works with. We produce high quality products for both domestic and international customers. In addition, we have the advantage of producing large volumes with an external wheat storage silo capacity of 46,000 tonnes.
Our factory, which is located approximately 8 km from the port in TekirdaÃ??, facilitates the supply of raw materials. Most importantly, it offers us a great logistical advantage to export to a wide geography.
With its modern production facility and strong, qualified human resources, we have become the leading institution in the flour, grain and cereals sector, especially in recent years.
