Scope
This instrument is mainly used for measuring the acid value of petroleum products such as insulating oil and steam turbines. The instrument integrates optics, electronics, mechanical and electrical, chemical and other high-tech products. It has the characteristics of fast measurement, accuracy, reliability and good repeatability.
Features
1, large-screen LCD, English menu prompts, no identification keys;
2. Wrap Cup, automatic detection, automatic storage, automatic print test results;
3, the instrument can detect oil sample of six;
4, innovation introduced the US imports XECOM data processing chip, fast and accurate data processing;
5, the use of import VERDER accurate injection systems, precision control results progress;
Technical Parameters
1, supply voltage: ~ 220V ± 10% 50Hz
2, the maximum power consumption:
Scope
The instrument can precisely control the sample temperature, it can accurately measure the surface tension of various liquids and mineral oil against water by ASTM D971 Ring method.
Features
1, LCD display, keyboard operation
2, single-chip program control, automatic detection
3, automatic calibration procedures and calibration weights, easy to operate
4, integrated design, easy maintenance
Technical Parameters
1, the display method: LCD display
2. Measuring method: ring method
3, measuring range: 5 ~ 95mN / m
4, the moving speed: Fast: 1mm / S
5, slow speed: 0.3-0.4mm / S
6, sensitivity threshold: 0.1mN / m
7, Accuracy: ± 0.5mN / m
8, the power supply voltage: 220V ± 10%, 50Hz ± 5%
Scope
Test standard: ASTM D892
This instrument is used to determine the tendency and stability of oil to produce foam, such as fuel oil, lubricating oil, gear oil, hydraulic oil.
Features
1, the instrument uses a high-precision digital display temperature control mode, with high temperature control, display intuitive
2, automatic temperature control, automatic timing, air source and gas flow centralized control system, easy to operate
3, high technology content, and with a digital electronic timing function
4, the instrument uses a split, integrated combination, easy to move
5, configure the dedicated refrigeration system to meet the needs of experimental low temperature
6, the instrument configuration dedicated green pump system, no external air supply
Technical Parameters
1, power supply voltage: AC220V ± 10% 50Hz
2, FDT foam properties thermostatic bath temperature: 24 ?? 93.5 ??
3, the heater power: 2500W (93.5 ?? bathtub) 800W (24 ?? bath)
4, temperature measurement devices: platinum resistance (PT100)
5, the gas diffusion head diameter: 25.4mm ± 0.02
6, diffuser air permeability: at 2.4KPa (250mmH O) pressure is 3000 ~ 6000mL / min
7, experimental cylinder specifications: 1000mL (special cylinder)
Scope
It conforms to GB/T 12005.1, GB/T 17931, GB/T 14190. High degree of automation, good repeatability of test results
Features
1, the LCD screen English display, interactive interface, preset temperature, test time and other parameters, menu prompts input
2, the actuator using advanced SSR, which is characterized by non-contact, no action noise, no spark, vibration resistance, long life.
3, bath heater and draft tube internal parts such as the use of stainless steel, corrosion-resistant and durable.
4, automatic calculation and testing of the capillary constant time average of the product; the high precision temperature control, good accuracy.
5, the introduction of imported XECOM US data processing chip, fast and accurate data processing
6-cylinder design, better insulation and protective measures
7, automatic countdown function, automatic calculation results
Technical Parameters
1, the control temperature settings: room temperature ~ 100
2, the number of samples: 2 tubes
3, constant temperature accuracy: ± 0.1
4. Display: LCD
5. Countdown: automatic countdown
6, heat power: 1000W
7, work power source: 220V ± 10% 50Hz
8. Ambient temperature: room temperature ~ 35
9, Weight: 25kg
Scope
This instrument is based on GB / T8018, ISO5736, ASTM D525, DIN51781 "Determination of oxidation stability of gasoline (induction period method)" Determination of oxidation stability of gasoline under accelerated oxidation conditions. It can be used to indicate the tendency of gasoline to induce glial generated during storage.
Features
1, oxidation stability of gasoline tester is split desktop, compact, easy to operate, and comfortable.
2, oxidation stability of gasoline tester can simultaneously accommodate two GB / T8018 standard oxygen bomb, oxygen Bouncing body good sealing performance, easy assembly and disassembly.
3, oxidation stability of gasoline tester tub made of stainless steel, rust-proof and durable.
4, oxidation stability of gasoline tester direct condensation by oxidation bath cover, bath closed due to oxidation, good condensing performance, an experiment without rehydration.
5, the oxidation stability of gasoline tester using the time proportional to adjust the temperature, the heating power can be adjusted within the range of 0 ~ 2000W.
Technical Parameters
1, the working voltage: 198-242V
2, the power frequency: 49-51Hz
3, heater maximum power: 2000W
4, temperature: automatic control
5, the test temperature range: 98 ~ 102
6, temperature control accuracy: ± 0.1
7, temperature measurement devices: platinum resistance (Pt100)
8, thermometer indexing: 0.1
9, bathtub capacity: 28.8 l Bath depth: 320mm
10, pressure gauge: 0 ~ 1MPa, 0.4 level
11, mixing method: Electric
15278 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
The Hammer Union type mainly consists of Figure 100, Figure 200, Figure 206, Figure 300, Figure 400, Figure 600, Figure 602, Figure 1002, Figure 1003, Figure 1502 and Figure 2002, figure 2202
Hammer Union
We can provide various hammer unions based on the introduced technologies from other country,including thread connection type,welding type and H2S service unions.1"-6" and CWP of 1000psi-20,000psi unions are available.For easy identification,unions with different pressure ratings will be painted in different colors,and there are evident marks indicating size,connecting mode and pressure ratings.
Seal rings are made of quality rubber compound which greatly enhance load-bearing capacity and sealing performance and protect connectors from erosion.Different pressures and applications have different sealing method.
Fast Installation
Wherever they are,wing nuts and right ACME will ensure quick installation or dismantling without special tools.
Highly Interchangeable
All unions are made in American system,and can be interchanged with products in international market.Seal rings are fully interchangeable with equivalent products;Marks of size and pressure in wing nuts are formed in die-forging model,same as international products.
The dies and Jaws are made of high-quality alloy steel in SAPWELLS.
They are chemically heart-treated for surface hardness.
They are wear-resisting and corrosion-resisting and they have a long service life.
We can also design and manufacture special inserts according to customer's requirement.
L9707 car engine computer board chip is car CPU usual engine control Chip, L9707 Car Computer Board chip is replaceable on auto ECU main board and CPU processor main board, L9707 is used to the ECU Integrated Circuit IC for car computer board ECU repair
We supply and export wide variety of EMD consumables and parts including
Interchangeable common parts,
all accessories such as wire guide, power feeder, current supply, roller, nozzle etc for different makers.
brass or copper tube electrode,
EMD Ion exchange resin,
JR3A emulsifying ointment special
EDM filter- with high quality-price ratio using imported H&V paper
brass wire ,copper wire , Molybdenum wire
Miscellaneous.
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
3. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
1. Descriptions:
The cementing head is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body,and upper rubber plug and lower rubber plug can be put in at same time.
The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily.
Not only common thread,also special thread cement head can be produced including NEW VAM,VAM TOP,FJ ETC.
Main Parameters
2. Technical specification and parameter:
Type ST35-140 ST35-178 ST35-140 ST35-140
Size 139.7(5 1/2") 177.8(7") 244.5(9 5/8") 339.7(13 3/8")
Max.working pressure 35Mpa 35Mpa 35Mpa 20Mpa
Casing coupling thread 5 1/2" LTC/BTC 7" LTC/BTC 9 5/8" LTC/BTC 13 3/8"LTC/BTC
Manifold interface 2" union 2" union 2" union 2" union
ID of plug container (mm) 125 160 225 320
Length of plug container (mm) 450 460 560 560
Overall length 1886 1972 1701 2210
1. Descriptions:
The cementing head is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body,and upper rubber plug and lower rubber plug can be put in at same time.
The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily.
Not only common thread,also special thread cement head can be produced including NEW VAM,VAM TOP,FJ ETC.
Main Parameters
2. Technical specification and parameter:
Type ST35-140 ST35-178 ST35-140 ST35-140
Size 139.7(5 1/2") 177.8(7") 244.5(9 5/8") 339.7(13 3/8")
Max.working pressure 35Mpa 35Mpa 35Mpa 20Mpa
Casing coupling thread 5 1/2" LTC/BTC 7" LTC/BTC 9 5/8" LTC/BTC 13 3/8"LTC/BTC
Manifold interface 2" union 2" union 2" union 2" union
ID of plug container (mm) 125 160 225 320
Length of plug container (mm) 450 460 560 560
Overall length 1886 1972 1701 2210
We are the reputed supplier and importer of ERT-01 Evaporation Residue Constant Weight Tester in India - Contact us now to Get Quick quote for ERT-01 Evaporation Residue Constant Weight Tester in India by Labthink.
This heavy-duty tool is designed for rugged use in foundries, fabrication shops and construction applications. The tool is available in 25 through 100mm stroke versions, which offer the power levels necessary for a variety of uses, from light to medium chipping and trimming through heavy cutting.
Features
- Simplate valve - for smooth, powerful operation.
- Rugged construction - hardened steel piston, cylinder and handle.
- Teasing throttle - for precise control.
- Clip lock - prevents loosening of handle/cylinder
CP Demolition picks are powerful yet relatively light making them suitable for a wide variety of light to medium demolition applications. They are particularly popular with rental outlets because of their rugged and straightforward design and their versatility of use.
Features
- High power to weight ratio.
- Slim and compact design for easy handling.
- Heat treated alloy steel components for durability.
These tools are excellent for medium to heavy concrete demolition, cutting large rivets and bolts, and other cutting and ripping operations.
Features
- Teasing throttle - precise control.
- Forged steel handle - designed for long life under rugged conditions.
- Hardened steel piston and cylinder - excellent wear resistance.
CP backfill tampers are designed to effectively compact soil around foundations and other structures and for compacting backfill in trenches. The CP 3 is designed to handle light to medium applications while the CP 4 RV is the ideal tool for heavier jobs.
Features
- Well-balanced, smooth operating tool - easily guided by one person.
- Aluminum Butt held with clamp screw - for quick, easy replacement.
- Exhaust deflector - directs air, moisture and oil away from operator.
- Integral oiler - continuously lubricates tool during operation.
15278 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
