Please click here to check who's online and chat with them.

Find Verified Computers Electronics Communications Electrical Suppliers, Manufacturers and Wholesalers

Feb-04-15
 
Features
- 4 independent full-duplex channels
- Up to 11.2Gb/s data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Up to 100m transmission on OM3 multimode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0 to 70oC
- XLPPI electric interface
- Maximum power consumption 1.5W
- RoHS-6 compliant

Applications
- Rack to Rack
- Data Center
- Infiniband QDR, DDR and SDR
- 40G Ethernet
Feb-04-15
 
Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-LW/LR
- 1310nm DFB transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant

Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
Feb-04-15
 
Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-SW/SR
- 850nm VCSEL transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant

Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
- Inter Rack Connection
Oct-17-20
 
The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optechâ??s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G.

Features
- Hot pluggable QSFP28 MSA form factor
- Compliant to IEEE 802.3ba 100GBASE-LR4
- Supports 103.1Gb/s aggregate bit rate
- Up to 10km reach for G.652 SMF
- Single +3.3V power supply
- Operating case temperature: 0~70â??
- Transmitter: cooled 4x25Gb/s LAN WDM DFB
TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
- Receiver: 4x25Gb/s PIN ROSA
- 4x25G electrical interface (OIF CEI-28G-VSR)
- Maximum power consumption 4.0W
- Duplex LC receptacle
- RoHS-6 compliant

Applications
- 100GBASE-LR4 Ethernet Links
- Infiniband QDR and DDR interconnects
- Datacenter and Enterprise networking
Feb-04-15
 
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers.

10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks.

Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors.

Features
- Supports Links up to 30m using Cat 6a/7 Cable
- Compliant with IEEE 802.3az
- Compliant with SFF-8431 and SFF-8432 MSA
- Low Power Consumption (2.5W MAX @ 30m)
- Auto-negotiates with other 10GBase-T PHYs
- I2C 2-Wire Interface for Serial ID and PHY Register Access
- Auto-sense MDI/MDIX
- RoHS Compliant
- Operating temperature range: 0 C to 70 C

Applications
- 10 Gigabit Ethernet
712 Computers Electronics Communications Electrical Suppliers
Short on time? Let Computers Electronics Communications Electrical sellers contact you.
Feb-02-16
 
Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability.

Features
- compliant with ieee802.3z
- gigabit ethernet standard
- compliant with ieee802.3ae 10gbase
- compliant with sonet oc-192 sr-1 sdh stm i64.1
- class 1 laser product complies with en 60825-1
- rohs compliant

Applications
- telecommunications
- datacenter
- network interface
- test and measurement equipment
Oct-10-20
 
Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4.

The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density.

Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot.

Features
* QSFP-DD MSA compliant
* 8 parallel lanes on 850nm center wavelength
* Compliant to IEEE 802.3bs Specification
* Up to 100m transmission on multi-mode fiber
(MMF) OM3 with FEC
* Operating case temperature: 0 to 70�°C
* 8x53.125Gb/s electrical interface (400GAUI-8)
* Data Rate 53.125Gbps (PAM4) per channel.
* Maximum power consumption 12W
* MPO-16 connector
* RoHS compliant

Applications
* Data Center Interconnect
* 400G Ethernet
* Infiniband interconnects
* Enterprise networking
Sep-11-20
 
Definition of 400G QSFP-DD Transceivers

QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density.
Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot.

Multi-mode Transceivers
Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver.

400G QSFP-DD SR8
The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA.

Single-mode Transceivers
Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance.

400G QSFP-DD DR4
The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.

400G QSFP-DD DR4+
The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.

400G QSFP-DD LR4
The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA.

400G QSFP-DD Loopback
The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
Mar-30-16
 
Features:

1. Real-time monitoring of grain temperature to prevent spoilage
2. 1-wire digital temperature sensors
3. Unique temperature/level (EST120) monitoring cable
4. 98.5ft (30m) maximum cable length
5. Customizable number and location of temperature sensors
6. Simplified and lower installation costs using digital technology, wired or wireless
7. Operator interface with remote monitoring PC-software
Mar-03-16
 
Specification :

· Available USB Capacity: 64MB, 128MB, 512MB, 1GB, 2GB, 4GB, 8GB etc.
· Compatible with PC or Notebook with USB interface.
· Open designs with custom printed logos.
· Unit price and set up fee shall be negotiated.
· Size: about 43 x 17mm x 9mm
· Weight: approx. 23g
· Meterial: Zinc alloy
· Custom logos can be laser engraved or silkscreen printed on metal parts
Mar-03-16
 
Specification :

· SOFT PVC USB flash drive
· Custom logos can be 2D flat or 3D cutic
· We have some open designs for options
· Free mold charge for choosing open designs.
· Available USB Capacity: 64MB, 128MB, 512MB, 1GB, 2GB, 4GB, 8GB ....etc.
Aug-30-16
 
Upgrade your optical microscope into digital one! the quality of our microscope camera has been approved by taiwan academia sinica researcher.

Key features:
• observe from pc screen, take pictures and record videos with voice
• to upgrade your optical microscope into digital one
• can be used in any standard microscope eyepiece hole (23 mm), plugged directly into the eyepiece hole

Applications:
• fits most kinds of low-price optical microscope
• microscope seller: digitize the original optical microscope with ee130 to sell high price
• education & researcher: biology course, dissection, professor, teacher, student

Advantages:
• high resolution
• your brand is very welcome
• easy to install and operate
• simple and powerful software for researchers
• 1/3 price of olympus microscope camera
• lightweight and easy installation; convenient for traveling researchers
Oct-07-14
Supplier From Taipei, Taiwan
 
Copper rod lan cable magnet wire
Aug-16-14
 
Type rm
Case size 8x11mm, lead spacing 4.7mm for general use
Features:
!cminiature standard size 8x11mm
With 4.7mm lead spacing for uniform pcb layout
Aug-16-14
 
Vss series
Features:
 4¢gr~6.3¢gr, 85¢fj, 2000 hours assured
 vertical chip type miniaturized for 4.5mm height
 rohs compliance
Aug-16-14
 
T.C. Type (class i)
The capacitors have characteristics of predictable linear capacitance
Change versus temperature which are suitable for temperature
Compensation of resonant circuit, filters, coupling and decoupling
In rf circuit where low losses and close capacitance tolerance
Are required.
Aug-16-14
 
Type r, rf
Miniature standard size for general use, radial leads
Features:
!ctype r -- miniature size for general purpose
!ctype rf -- miniature size for general purpose with longer load life
Aug-16-14
 
Ve series
 3¢gr~16¢gr, 85¢fj, 2000 hours assured
 chip type large capacitance capacitor
 rohs compliance
May-26-09
Supplier From Taipei, Zhongzheng, Taiwan
 
Jun-01-13
 
Home decoration
In 1978, great creator enterprise co was established in taiwan.In 1996 , wehad found a 300 peoples factory in jinyuan 3rd rd., xinqiao 3th industrial park, shajing town, bao'andistrict shenzhen guangdong china.

Our company designs and produces decorative items with polyresin. Ourproducts are covered europe, the united states, canada and australia as well. We provide good quality andprompt delivery, which are identified with our customers all over the world.

Our products including table lamp, homedecoration, candle holder, and led decoration lamp.








Table lamp back in one brown box
712 Computers Electronics Communications Electrical Suppliers
Short on time? Let Computers Electronics Communications Electrical sellers contact you.
See what buyers and suppliers are discussing in Computers Electronics Communications Electrical import export community