This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller.
Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole.
When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position.
In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference.
Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal.
Dipole and the main Controller consume very low power suitable for non-stop operation.
System does not need any operator to monitor like a metal detector.
Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning.
When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller.
Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole.
When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position.
In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference.
Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal.
Dipole and the main Controller consume very low power suitable for non-stop operation.
System does not need any operator to monitor like a metal detector.
Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning.
When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.
4G with SIM card holder is a wireless module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/UMTS/GSM/GPS/GLONASS(Optional) network.
On LTE-FDD network, 4G with SIM card holder enables connect to the Internet at DL data speed up to 150Mbps and UL data speed up to 50Mbps. In the area where LTE service are not available, 4G with SIM card holder still enables reliable and secure data connect over 3G(UMTS) or 2G(GSM) network.
4G with SIM card holder provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc.
General features:
EDGE multi-slot class 33
GPRS multi-slot class 33
Compliant to GSM phase 2/2+
Output power:
- Class 3 (0.25W) for LTE/UMTS
- Class 4 (2 W) for GSM 900
- Class 1 (1 W) for GSM 1800
Control via AT commands
(3GPP TS27.005/3GPP TS27.007 )
Supply voltage range 3.3V- 4.2V
Low Power consumption
- Sleep mode: 3mA
- Power down: 16 �¼A
Dimensions: 51.0Ã??30.0Ã??4.6mm
Operation Temperature: -40�°C to +85�°C
MSL : 3
Band Configuration
LTE-FDD Band 1/3/5/7/8/20/28
LTE-TDD Band 38/40
UMTS Band 1/5/8
GSM Band 3/8
Specifications for GNSS
GPS frequency: 1575.42MHz
At least support 44 channels
Sensitivity
- Acquisition: -158dBm
- Tracking: -162dBm
TTFF
- Cold Start: 28s
- Warm Start: 18s
- Hot Start: 1s
Specifications for data
Support Release 11 Category 4
LTE-FDD up to 150 Mbps DL,50 Mbps UL
LTE-TDD up to 130 Mbps DL,35 Mbps UL
DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL
EDGE class 33: 296Kbps DL,236.8Kbps UL
GPRS class 33: 107kbps DL,85.6kbps UL
CSD up to 14.4 kbps
Non transparent mode
PBCCH support
PPP-stack
Coding schemes CS 1,2,3,4
FOTA
TCP/IP
NDIS
Specifications for SMS
Point-to-point Mo and MT
SMS cell broadcast
Text and PDU mode
