Find Verified Marine Equipment Machinery Suppliers, Manufacturers and Wholesalers

Powder Brushes / Foundation Brushes / Angled Brushes / Highlight Brushes
Smudge Brushes / Eye Shadow Brushes / concealer Brushes / lip brushes

Feature:
(1)no use sewing machine oil as lubricant!
(2)cutting accurate.
(3)easy to operate.
(4)safety cover design.
ng the numbers of cutting length & quantity. (2)automatic cut to length.
(3)automatic stop when quantity runs out. (4)to cut textiles, plastic sheet, leather belt, ribbon and other materials which can be cut by scissors.
Specification:
(1)cutting length: 9999.9mm.
(2)cutting width: 100mm.(offer other size)
(3)volt: 110v or 220v.


N.W.: 29kgs.
G.W.: 45kgs
Packing:wooden case

Feature:
(1) easy to operate: skills free!
(2)adaptable for any size of scissors, thread snip.
(3)the grinding stone could be replaced.



N.W.:6kgs
G.W.:7kgs
Packing:carton

Feature:

(1)auto cutting cloth, leather, p.V.C., curtain etc.
(2)auto lifting stacks.
(3)auto counter.
(4)grinder attached. Keep the blade sharp.
Specification
(1)rail size: 84".
(2)volt: 220v.


Packing:carton

Expert on Industrial sewing machine and related spare parts, also provide 2nd industrial sewing machines

1set/ctn
parts /ctn

Liquid filling machine for industrial liquid

L(149cm)xw(119cm)xh (224cm),
N.W. 200.5kg.

A. As for the fluting type which can be connected with e-b-c-a-f-g flute, we also can make any type of the flute and cut-off size for the machine that customer required.

B. Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up steam recovery system.

C. Oil immersed type gear box driven directs the lower fluting roller, pressure roller, glue roller and doctor roller performed by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping.

D. The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control.

E.Designed by fingerless with a vacuum blower by positive pressure to keep fluting profile then glue.

F. The single facer to use cassette quick change flute profile and change cassette within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to saving the time to change flute and machine stop.

Price, delivery time, moq are negotiable, please contact us for quotation.

A. The orders changed of size fastest in approximately 3-7 seconds to get pre-setting position. And provide 99 memories pre-setting for order change at any time also accommodatingly in the production management system.

B. The machine has installed precision liner slides and ball screw bearing with encoder to get accurate position. The precision allowance within 0.5 mm to adapt of accuracy requirement various processing factories.

C. The upper scoring wheels is single convex type. It can be replaced destruction wheels to used. The upper and lower scoring wheel has equipped 3 types: convex to convex, convex to concave and convex to flat . Selected by switch button. Operate easily.

D. Front scoring units affirmed to rear scoring units, the scoring distance of board to achieve the random size.

E. The round razor type slitting knives. It can slit cardboard orderly and pretty. The minimum slitting edge is 3~5mm.

F. Automatically grind and lubricate without removing slitting knives and extended the life of knives.

G. Lubricant device is fixed by level feeding system which volume control very accurately and no waste even no any pollution to the board and environment

Price, delivery time, moq are negotiable, please contact us for quotation.

This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller.
Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole.
When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position.
In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference.
Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal.
Dipole and the main Controller consume very low power suitable for non-stop operation.
System does not need any operator to monitor like a metal detector.
Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning.
When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.

This mobile phone detection system consists of two sensor poles (Dipole). Each pole has six equally spaced sensors connected to a micro-controller.
Detected data are spontaneously wireless transmitted to a Main Controller. Data are further analyzed by the main controller to determine if a mobile phone has passed through these Dipole.
When a person walk through the Dipole with a mobile phone, signal strength (above the background noise level) of each detector is displayed on Main Controller's LED panel instantaneously with respect to its position.
In the mean time, main controller will sound alarm, active dry contact, or establish wireless or TCP/IP communication with a remote computer depends on customer's preference.
Dipole is very lightweight and easy to set up. Since it is a reactive system, dipole does not generate any harmful strong RF driver signal.
Dipole and the main Controller consume very low power suitable for non-stop operation.
System does not need any operator to monitor like a metal detector.
Moreover, Upgraded Idle Standby Phone Walk Through Detector RFD-10PL (TCP/IP Plus) can work with one or multiple IP cameras for remote monitoring and warning.
When someone with a phone walks through RFD-10PL cell phone door detector, you will get sound and image alerts quickly. A photo capture pops up to show you who has a phone on our software interface. IP camera's address and time stamp also on the photo. Only the detected photos are stored in the recorded files so you can efficiently find out who have phones without replaying all recorded videos of the IP cameras.

The Micro 4G Video Server is an advance, portable and ultra-light weight (235g) video transmitter, provides reliable and high-quality video streaming from any HDMI camera. This live video broadcasting device with powerful video recorder, 4G LTE modem and GPS build-in; the 4G video transmitter delivers 1080P Full HD video with extreme bandwidth efficiency over 4G LTE network/WiFi for remote monitoring from anywhere in the world. This light weight 4G video streaming recording device is a compact hardware and easy to integration with 3rd party video management software. The 4G live video transmitter is very small in form (92 x 92.2 x30.7mm, without antenna) and use 5V/12V power (battery not induced). With 10,000mAh battery allows 5 hours of video streaming. Using Mobile Bandwidth Aggregator technology to improve video data streaming and reduce latency therefore the portable 4G video sender offers secure, real-time, and low-latency video broadcasting over cellular connections.

Automatically track object mode
Zone (overstep) tracking mode
Timing tracking mode
Alarm tracking mode
Activity detection mode
Perfect manual & auto incorporate tracking


G.W.5kgs