1 Description
WSS002 Dual Band Antenna with RP-SMA(M)
2 Model No.:WSS002
3 Antenna Profile:108.5 mm
4 Color:Black
5 Electrical Characteristic
Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band
Antenna Type:Dipole
Polarization Type:Linear
Type of Radiation:Toroidal
Peak Gain:2.0 dBi Typical
Impedance:50 Ohm nominal
VWSR:2.0:1 Max
6 Mechanical Characteristics
Action:Swivel Type
Lead Length:RP-SMA(M)
Core:N/A
7 Raw Material
Coaxial Cable:RG-178
Housing:TPU
Hinge:PC+ALLOY
1 Description:WSS007 Dual Band Antenna with RP-SMA(M)
2 Model No.:WSS007
3 Antenna Profile:197 mm
4 Color:Black
5 Electrical Characteristic
Operating Frequency:2.4~2.5GHz/ 5GHz/ Dual Band
Antenna Type:Dipole
Polarization Type:Linear
Type of Radiation:Toroidal
Peak Gain:2.0 dBi Typical
Impedance:50 Ohm nominal
VWSR:2.0:1 Max
6 Mechanical Characteristics
Action:Swivel Type
Lead Length:Customization
Connector:RP-SMA(M)
Core:N/A
7 Raw Material
Coaxial Cable:RG-178
Housing:TPU
Hinge:PC+ALLOY
Keding Enterprises Co., Ltd. is a global leading engineered wood flooring manufacturer in Taiwan. We are a green building materials supplier, providing healthy and sustainable design that is affordable. All of our products are non toxic and flame retardant, formulations that prevent fires from starting or spreading. The characteristics of our products include scratch resistant, anti bacterial property, surface abrasion resistant, stain resistant, cigarette burning resistant and solvent free property, ensuring long life, low maintenance, as well as durable and dependable surface that will continue to look good for years. Besides, our prefinished products are cheaper and can save your cost as clean up and labor is not required.
Sc-4301-3gr hsdpa / hsupa / evdo a / modem wifi router
Is the first true wireless access router, supports wifi and ethernet gateway in one device. It
Offers wireless broadband wan hspa connection with data rate up to 7.2mbps.
On local area network (lan), it supports both the wireless wifi 802.11b/g and wire ethernet
10/100mbps interfaces. Users can connect the internet by wan port, or insert the service
Provider sim card by build-in the hspa wireless module.
Built in the hspa wireless module, just insert the service provider sim card.
High-speed data connections with rate up to 7.2mbps
Nat & napt with vpn pass-through virtual server
Automatic receipt of ip address with dhcp server
5 led indicator x 5(pwr, 3g, wifi, wan & lan)
Browser-based configuration and easy set-up wizard
Access control to manage users
User-friendly configuration and diagnostic utilities
Industry-leading firewall security
Supports 802.11b/g·+frequency from 2.4ghz to 2.483ghz·+access points, routers and
Gateway server applications , wireless up to 32 pc users
Technical specifications
Wireless wan:
Sim card interface,
Hspa wireless modem,
Built-in the module, the function are as follows:
Sc-4301-3gr-a·ªthe module is uc864-g (msm6280):
Tri-band umts 850/1900/2100 mhz
Quad-band gsm/ edge 850/900/1800/1900 mhz
7.2mbps (download) and 384kbps (upload) .
Dimension & weight·ª
Dimension: 136*125*36mm; weight 310g (contains the antenna).
LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
* GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
* High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -161 dBm
* 52 track verification chann els
* SBAS (WAAS or EGNOS,MSAS)
* Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
* Tracks up to 8 CW jammers
* Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
* Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
* SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
* Reacquisition Time : 0.1 second
* RF Metal Shield for best performance in noisy environments
Hardware and Software
* Based on the high performance features of the SiRFstarV low power single core logic.
* Adaptive micropower controller
* Only 50 to 500�¼A maintains hot start capability (core logic)
* < 10mW required for TricklePower mode
* RoHS compliant (lead-free)
* SMT pads allow fully automatic assembly processes equipment and reflow soldering
* Advanced navigation features
* Smart sensor supported by I�²C interface
* External interrupt input for context change detection
Advantages
* Built-in LNA.
* Built-in internal ROM and based on Firmware 5.5.X
* It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc.
* Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity)
* Support SiRFaware technology
* Support adaptive Micro Power Controller power management mode.
* < 10mW TricklePower, so user can leave power on all day instead of power off.
* Suitable for battery drive devices that need lower power consumption application
* Cost saving through elimination of RF and board to board digital connectors
* Flexible and cost effective hardware design for different application
The DS-354 utilized SiRFstarV â?¢ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
â?¢ GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
â?¢ High sensitivity navigation engine (PVT) tracks as low as GPS : -165dBm, GLONASS : - 161dBm
â?¢ 52 track verification channels
â?¢ SBAS (WAAS or EGNOS,MSAS)
â?¢ Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
â?¢ Tracks up to 8 CW jammers
â?¢ Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) â?? Need operator support
â?¢ Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
â?¢ SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
â?¢ Reacquisition Time: 0.1 second
â?¢ RF Metal Shield for best performance in noisy environments
Hardware and Software
â?¢ Based on the high performance features of SiRFstarVâ?¢ low power single core logic.
â?¢ Adaptive micropower controller
â?¢ Only 50 to 500�¼A maintains hot start capability (core logic)
â?¢ < 10mW required for TricklePowerâ?¢ mode
â?¢ RoHS compliant (lead-free)
â?¢ Advanced navigation features
â?¢ Smart sensor supported by I�²C interface
â?¢ External interrupt input for context change detection
â?¢ MMCX RF Connector
â?¢ Dimension : 36 x 24 x 10.5 mm
1. Varied battery management styles
2. 24 hours automatically monitoring
3. Wi-fi and hotspot connect method
4. High extensibility of hardware allows user to manage big amount of battery
5. B-TEK special forecast scatter chart
6. E-mail alarm notification
7. Monitoring item includes battery volt., temperature, DCR, micro-discharging volt. and EMF
8. B-TEK unique AI forecast function
9. Support Modbus TCP/IP, RTU and LAN method
UPS system as the important equipment to the stable power supply needs a great amount of battery as a back-up power source. Due to the enormous amount of the batteries, it makes it hard to carry out the manual maintenance. To maintain the discharge ability during the outage, regularly manual detection is needed. However traditional battery discharge test needs battery offline. It's time-consuming and increasing the cost. BMS system can improve the risk of manual measurement, battery deterioration, and power failure, changing battery according to the actual condition of batteries. Besides, the automatic battery equalization function can extend battery life. Not only can it raise the reliability, lower the cost of battery failure, decreasing manual labor also increasing the stuff safety by avoiding direct contact with the electric device.
BMU is installed to the individual battery, collecting the data and send it to the UMW to analyze. BMU is powered by the detected battery, therefore the extra power is not needed, This unit applies to a lead-acid battery, nickel-cadmium battery, lithium battery. BMU analyzes 5 parameters: terminal voltage, temperature, dc resistance, micro-discharging voltage, and electromotive force. Bu analysis, the system finds the deteriorated reasons for the battery and do the predictive maintenance. The groove on the back of BMU allows it to attach on the mounting rail. Dimension is 75*57*31mm. Reverse connection protection function will keep the internal circuit of BMU intact from a reverse connection.
CMU connects to the charger and UMW. The main purpose is to monitor the current of the charger and the total voltage of the battery bank. The groove on the back of the CMU allows it to attach on the mounting rail. Dimension is 75*57*31mm.UMW provides the website browsing function, the user can access the real-time data, historical data, forecast scatter chart, line or curve graph through it. We can utilize a computer, mobile phone or tablet to remotely access the system through ethernet and hotspot function. Besides that, we can also use the FTP and VNC software to remotely access the data or control the system. When the system detects the abnormal parameter, it will automatically send the email notification and inform the users. Another AI function can provide a maximum of three years predicted data of the battery by analyzing the historical data. Efficiently manage the energy system
SPECIFICATIONS
Steel Scrap in bulk according to grade HMS 1&2 Max size 1500*500*500 mm.
40% of HMS 2, sheets of max 4mm thick, max 5% of galvanized steel (close to ISRI 203), max 2% of soil is acceptable.
Cast iron, baled scrap, non-ferrous metals, explosive shells of military type, any gas tubes (empty or full), radioactive materials, slag, melt, stones is not allowed. Oversize is not allowed.
Crude oil is a naturally occurring, unrefined petroleum product composed of hydrocarbon deposits and other organic materials. A type of fossil fuel, crude oil can be refined to produce usable products such as gasoline, diesel and various forms of petrochemicals.
