Find Verified Steel Rods Suppliers, Manufacturers and Wholesalers

316L stainless steel is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

Stainless steel strip is an extension of ultra-thin stainless steel plate, and is also a kind of steel plate used in industry. However, unlike ordinary steel plates, stainless steel strip has a longer shape, and its scope of use is also different from ordinary steel plates. At present, there are many varieties of stainless steel strips, and there are also many different production specifications. Different stainless steel strips use different categories. Cold rolled strip is a specially treated stainless steel strip product. It is another industrial steel strip product, which is made of stainless steel strip as the basic material and is processed by cold rolling mill at room temperature. The rolled strip has excellent characteristics such as smooth surface, flatness, high dimensional accuracy and good mechanical functions, and is often processed into rolls and coated steel plates. Cold rolled strip is widely used in tractor, car and other industrial manufacturing. Hot rolled strip is another kind of stainless steel strip, which has low hardness, easy processing, good ductility and other excellent characteristics, so it is often used as a thin plate.



Product Name

316L Stainless Steel Strip

Material DIN

1.4301/1.4306/1.4541/1.4401/1.4404/1.4571/1.4539/1.4410/1.4833/1.4845

Surface

BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D

Edge

Plain Mill

Standard

ASTM DIN GB JIS EN AISI

Grade

316L

Product Description - "Stainless Steel: ASTM A 479 Gr 304/ 304L/ 304H/ 316/ 316L/ 316Ti/ 317/ 317L/ 321/309/ 310/
347 /409/ 410/ 416/ 420/ 430/ 43 l/904L/ En57, etc.
Others: Nickel, Monel, lnconel, Hastelloy, Alloy20, lncoloy, Duplex & Super Duplex, Titanium, "

Key Specifications/Special Features - Carbon Steel, Alloy Steel, Copper, Brass, Cupro Nickel, Aluminium, Zinc, Lead, 17.4PH, 440C etc. Types: Round, Square, Bars, Wires, Filler Wire, Hex, Welding Electrodes, etc .

Wire Rod is used in the industry in two types of indented and plain with the size of 5.5 mm to 16 mm. Wire Rod is manufactured in the factories up to the size of 12 mm, and the higher sizes are produced according to the order.

Also, the indented wire rod is divided into two categories of A2 and A3.

Wire Rod is used for different products and is the raw material for the wire drawing units, fasteners, automobile components, and hardware manufacturers.

With a successful history of supplying and exporting steel products, we have effectively positioned Arij Global Trading to meet the various requirements of our clients in different countries with the highest standards of quality of Wire Rod.

Diameters: 5MM to 60MM & 3/16" to 2.5"

Stock Range: 1 meter, 2 meter, 3 meter, 3 feet, 6 feet, 10 feet, 12 feet

Threads: MM Threads, UNC,BSW, UNF & BSF

Finishes & Color: Self Finish, Zinc Plated, Blue Finish, Yellow Finish, Green Finish, Black Finish, Natural Finish, White Finish,Hot Dip Galvanized (HDG),Mechanical.

We are considered as one of the pioneers engaged in offering a huge gamut of Stainless Steel 304 Rods.These are made of high quality stainless steel material. Our Stainless steel round bars find numerous applications in the construction industry as well as other commercial applications where strength reinforcement is necessary and forms a vital part of the construction. Metal bars are used to create various items such as nuts, shafts.

We Have Ready Stock Of SS 316TI Rods is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. Grade 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections. Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). Grade 316H, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316Ti. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

Overall Width / OD: At least. inch. ft. yd. ...
Overall Thickness: At least. inch. ft. yd. ...
Overall Length: At least. inch. ft. yd. ...
ID: At least. inch. ft. yd. ...
Tensile Strength (UTS, Break): At least. psi. ksi. kg/mm² ...
Yield Strength (YS): At least. psi. ksi. kg/mm² ...
Tensile Modulus (E): At least. psi. ksi.

Product:Rods
Brand:Renaissance Pipe Fitting Inc.
Sizes:Refer the specification
Condition:New
Rating:4.2, based on 42 reviews
price:Start from 20 USD

SS Rods, ASTM B221, UNS N06600, UNS N02200, UNS N06601, UNS N08800 High Nickel Alloy Rods, supplier.
RFP India is India's well-known manufacturer, supplier and exporter of Rods, which is an iron alloy with a very low carbon (less than 0.08%) content in contrast to cast iron (2.1% to 4%), and has fibrous inclusions known as slag up to 2% by weight. Many items, before they came to be made of mild steel, were produced from rods, including rivets, nails, wire, chains, rails, railway couplings, water and steam pipes, nuts, bolts, horseshoes, handrails, wagon tires, straps for timber roof trusses, and ornamental ironwork. Rods might be round, square, rectangle or flat, and flat rods might be narrow or broad. Rod iron is usually a cut from flat bar iron in a slitting mill to provide the raw material for nails.

The threaded rods are steel rods designed to be in full tension state. They are mainly used in suspended ceiling applications. They connect suspended metal profiles (C-channel, furring channel) to the soffit ceiling by using the appropriate drop in Anchor.
Advantages:
Ceiling System

Product Description


A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company.
Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel.
Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use.
Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production.
And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.

API 11B OILFIELD NORRIS SUCKER ROD FROM CHINESE MANUFACTURERAPI 11B OILFIELD NORRIS SUCKER ROD FROM CHINESE MANUFACTURER
The specifications and main parameters

SIZE
(in) ROD D.(in) THREAD D.
(in) LENGTH
(ft) OUTSIDE DIAMETER
OF PIN SHOULDER(mm) LENGTH
OF PIN(mm) LENGTH OF WRENCH
SQUARE(mm) WIDTH OF WRENCH SQUARE(mm)
5/8" 5/8" 15/16 2
4
6
8
10
25
30 31.75 31.75 �?�31.75 22.23
3/4" 3/4" 1-1/16 38.10 36.51 25.40
7/8" 7/8" 1-3/16 41.28 41.28
1" 1" 1-3/8 50.80 47.63 �?�38.10 33.34
1-1/8" 1-1/8" 1-9/16 57.15 53.98 �?�41.28 38.10








product show :






Company Information







Our Services
For more information, you can contact me :







Looking forward to cooperating with you!

Grades : Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000
Type :
Hastelloy Round Bar
Hastelloy Bright Bar
Hastelloy Polish Bar
Hastelloy Black Round Bar
Hastelloy Forged Bar
Hastelloy Forged Round Bar
Hastelloy Hex Bar
Hastelloy Forged Hex Bar
Hastelloy Flat Bar
Hastelloy Rod

Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Sizes : 1mm to 200mm diameter
Type : Bars, Rods, wire
Standard : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
Standard : ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTV 412 & 434
Type :
Round Bar
Bright Bar
Polish Bar
Black Round Bar
Forged Bar
Forged Round Bar
Hex Bar
Forged Hex Bar
Flat Bar
Rod

Grades : Monel 400, Monel k500
Range : 5 mm dia To 500 mm dia in 100 mm TO 6000 mm Length
Standard: ASTM / ASME SB 164

Range: 3.17 MM TO 350 MM DIA
Stainless Steel :
ASTM / ASME SA 276 TP 304 , 304L , 309S , 309H, 310S , 316 , 316L , 316 TI , 317 , 321 , 347 , 410 , 420 , 430 ,431 , 440A ,B & C. , 446 ASTM / ASME SA 479 TP 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 321 , 321H , 347 , 347 H , 410, 430 ,431 & 444.
Duplex Steel :ASTM / ASME SA 276 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760

Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.


Characteristics of Nitronic 60 include
â?¢ High pitting resistance
â?¢ Outstanding corrosion resistance Good high temperature properties for temperatures around 982 degrees Centigrade
â?¢ Oxidation resistance
â?¢ Crevice corrosion and chloride pitting resistance is greater than Stainless Steel 316.
Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60. Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.


Primary Elements:
â?¢ Between 16 and 18 percent Chromium
â?¢ 8 to 9 percent Nickel
â?¢ 7 to 9 percent Manganese
â?¢ 3.5 to 4.5 percent Silicon
â?¢ Halance being Iron
â?¢ Trace amounts of Carbon, Sulfur, Phosphorus and Nitrogen

Industries Served :
â?¢ Oil and gas production
â?¢ Hydroelectric power
â?¢ Petrochemical
â?¢ Food processing
â?¢ Automotive
â?¢ Zarine
â?¢ Nharmaceutical
â?¢ Construction and chemical sector.

* Saketh Exim is one of the top-notch threaded rod suppliers in India. We abricate an array of steel products that are used for various industrial applications . Tailoring the precise needs of different industries, we even customize steel Products as per the client specification

Specification
Size -

M6 to M100 & to 4"

Standard-

ASTM/ASME/BS/DIN/BS EN ISO /JIS

Grade-

ASTM A193 Grade B7, B7M, B8, B8M & B16
ASTM A320 Grade L7 & L7M
Stainless Steel 304, 304L, 316, 316L, A2-70/80, A4-70/80
BS 3692/ BS 4190 grade 4.6, 4.8, 5.6, 5.8, 8.8

Finish - Black, GI, Yellow, HDG, Cadium, Nickel, PTFE etc.