Common packaging is compound bag with one layer plastic and two-layer paper, fiber net weight in a bag is 50 lbs or 25kgs. Other weights are available upon request.
Denomination of the product :
Strongly carbonaceous steel fibers and filings (resulting from the recycling of tires).
Origin of the product :
Strongly carbonaceous steel fibers and filings resulting from the recycling of used tires of various categories (pv, cv, gv, hgv, pwv, cev, iv, agrarian, handling, motorbikes, etc.).
All the technical features of these tires comply with the regulations and standards requirements of france and of the european union.
Composition of the product :
The steel is a strongly carbonaceous steel.
The small rubber buffings mixed with the steel fibers and filings are made of a mix-in variable proportions of 2 main types of synthetic rubber and of natural rubber. The 2 types of synthetic rubber are :
- the sbr (styrene butadiene rubber)
- the nbr (nitrile butadiene rubber)
[cf. The specifications sheets of the products : 'rubber crumbs' and 'fine rubber powder'].
The textile filling and fluff mixed with the steel fibers and filings is made of a mixture of 4 types of fibers : aramide, nylon, polyester and rayon (mainly nylon, that is to say polyamide)
[cf. The specifications sheet of the product: textile filling and fluff].
Apparent density ( without compressing) :
238 kg / m3 or 0, 238 [+ or - 5 %] (adimensional).
Industrial process of manufacturing :
Exclusively with a mechanical crushing of the tires at ambient temperature.
The process used does not require and does not reject any kind of solid, liquid or gas additives.
Mass distribution of the constituents :
- steel fibers and filings : 95, 1 % + or - 2, 7 %
- rubber buffings : 3, 3 % + or - 1, 4 %
- textile filling and fluff : 1, 6 % + or - 1, 3 %
Lengths interval of the steel fibers :
[1, 00 + or - 0, 02 mm -> 100, 36 + or - 0, 02 mm].
Diameters interval of the steel fibers :
[0, 26 + or - 0, 02 mm -> 4, 73 + or - 0, 02 mm].
Tlsanli fiber optic chandelier is a creative and innovatory lighting product.Its design and lighting effect is vivid and unique .It is widely used in the decoration of high-class location, such as hotel, night-club, bar, etc.Now many familites trend to use it to decorate their home
151 Steel Fibres Suppliers
Short on time? Let Steel Fibres sellers contact you.
Steel mesh for concrete reinforcement manufactured from cold-worked reinforcement bar.
Size range: A142, A193, A252, A318, A393, A565 (A6~A12)
Width 2.2M x Length 6M or as per requested.
Specs: MS145 / SS561 or equivalent. Grade: B500A or equivalent.
Note: Price is indicative only, please contact with us for further discussion on the final quotation.
The hooked end steel fiber is made of low carbon steel wire,high carbon steel wire,or stainless steel wire, with tensile strength 1100Mpa,1200Mpa,1300Mpa,1400Mpa,1500Mpa,while the copper coated micro steel fiber can reach 2500Mpa.
It is widely used in the concrete for reinforcement,shock resistance,crack resistance and anti-fatigue.
Stainless steel fabrics are a type of fabric made from stainless steel fibers that have been woven or knitted into a textile. These fabrics are designed to have electrical conductivity, which makes them useful for a wide range of applications, such as electromagnetic shielding, heating elements, and wearable technology.
The electrical conductivity of stainless steel conductive fabrics comes from the presence of stainless steel fibers, which are made from a blend of stainless steel and other metals. These fibers are typically very fine and can be woven or knitted into a fabric using traditional textile techniques.
One of the main benefits of stainless steel conductive fabrics is their ability to shield against electromagnetic radiation. This makes them useful for applications such as electromagnetic interference (EMI) shielding in electronics and communications equipment. They are also used in medical applications to shield against electromagnetic fields generated by medical equipment.
Another use for stainless steel woven fabric is in heating elements. Because of their electrical conductivity, they can be used to create heating elements for clothing, blankets, and other applications where heat is needed.
Stainless steel fabrics are also used in wearable technology, such as smart clothing and fitness trackers. They can be integrated into garments to create sensors that track body temperature, heart rate, and other physiological data.
They are mainly used in fabrics, conductive plastics, antistatic brush, conductive or shielding materials, sintered felt, High temperature products, woven or nonwoven industries.
Place of origin: liaoning, china (mainland)
Brand name: harvest
Model number: monofilament
Material: polypropylene fiber
Application: for anti crack concrete reinforcement
Length: 3-20mm
Color: white
Ignition points: 560-570?
Density: 0.91+/-0.01g/cm3
Elastic modulus: 3500mpa min
Elongation at break: 10% min
Tensile strength: 560mpa min
Acid, alkali & salt resistance: strong
Melting point: 160 - 170
Steel fibers are widely used in various industries due to their ability to enhance the mechanical properties of concrete and other composite materials.
Concrete Reinforcement: Steel fibers are commonly used in concrete reinforcement to improve tensile strength, flexural strength, and impact resistance. This application is prevalent in both cast-in-place and precast concrete structures.
Crimped steel fiber is a low carbon, cold-drawn steel wire fiber designed to provide temperature and shrinkage crack control, strengthen flexural reinforcement, increase shear strength and improve crack resistance of concrete. It has excellent tensile, bending and shearing strength, high tenacity, and resistance against cracking, impact and fatigue.
Crimped steel fibers are low-carbon, cold-drawn steel wire fibers designed to provide temperature and shrinkage crack control, strengthen flexural reinforcement, increase shear strength, and improve crack resistance of concrete. Crimped steel fiber conforms to the standards outlined in ASTM C1116 (Standard Specification for Fiber Reinforced Concrete and Shotcrete) and ASTM A820 Type V (Standard Specification for Steel Fibers for Fiber Reinforced Concrete). These coarse steel fibers not only enhance impact resistance, shatter resistance, fatigue resistance, and abrasion resistance but also contribute to increasing the overall toughness of the concrete. The recommended dosage ranges from 25 to 100 lb/cubic yards (15 to 60 kg/m3), depending on the specific reinforcement requirements of the project.
Crimped steel fiber is widely used for buildings, road surfaces, bridges, tunnels, airport road surfaces, water conservancy projects, military engineering, and all kinds of building products.
Refractory AISI 304 stainless steel fiber is a type of reinforcement material that is made from AISI 304 stainless steel, which is a commonly used stainless steel alloy. The 304 Stainless Steel Fiber has resistance to high temperatures and can withstand thermal stress.
Refractory AISI 304 stainless steel fiber is a type of reinforcement material that is made from AISI 304 stainless steel, which is a commonly used stainless steel alloy. The 304 Stainless Steel Fiber has resistance to high temperatures and can withstand thermal stress.
AISI 304 stainless steel is a non-magnetic and austenitic stainless steel known for its corrosion resistance and versatility. When used in fiber form, it can enhance the mechanical properties of various materials, especially in applications where high temperatures or harsh environmental conditions are present.
These stainless steel fibers are often added to refractory materials such as concrete or ceramics to improve their strength, durability, and resistance to thermal expansion and contraction. The use of AISI 304 stainless steel in the fibers provides corrosion resistance, making them suitable for applications in which exposure to corrosive environments is a concern.
UHPC special steel fiber. The hook end model can enhance the anchoring effect with concrete and enhance the flexural strength of concrete. Widely used in high-speed rail prefabricated components, RPC cover plates, exterior wall painting, important engineering components,wear part, Wind power base and cylinder body, etc.
FIBPRO 3X steel fibres are designed specially for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X steel fibers are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements
Micro Steel Fibre Brass Coated High Carbon-Steel fibre used in High Performance densified concrete system. They are available in different diameter & length sizes.
Applications :
UHPC Concrete
Railway Sleepers
Manhole Covers
Random fibre mix produces better matrix building
When fully annealed, melt extract stainless steel fibers are more pliable and ductile. They not only allow for more user-friendly than the stiff cut fibers, but also have better flow features. It is especially characterized by thermal shock resistance, steep thermal gradients resistance and mechanical shock resistance, minimizing damage and delaying failure caused by cracking. Thanks to their optimum aspect radio, rapid fiber separation during the mixing phase are better guaranteed.
Gives its outstanding performance in thermal shock resistance, melt extract fibers are ideal for refractory concrete used in steel works and factories.
151 Steel Fibres Suppliers
Short on time? Let Steel Fibres sellers contact you.
