QU70 Rail is use for for crane and trolley track. Compared with the railway's heavy rail, crane rail height is low and head width thick waist size is bigger.Crane rail is on heavy rail in our country for the quality inspection is only required to chemical composition and tensile strength.
Due to the production batch, the specific model is different, the above of pictures are for reference only, for further details you can contact our sales staff to carry out the specific verification .
Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines.
Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.
pecifications:
Copper wire scrap, (Millberry) 99.99% at a purity of 99.98% min and 99.99% max
Copper: 99.9%
Carbon: 0.03%
Coblet: <0.001
Iron: 0.005%
Phosphorus: <0.01%
Sulfur: <0.01%
Zinc: 0.003%
Copper wire scrap:
Wire diameter: 0.20mm, 0.25mm, 0.30mm
Weight: 3kg, 5kg, 7kg, 15kg, 20kg
Purity:99.9% min
Packaging Details:50kg per bale , 1000kg per bundle ,or Customer Specific Requirements.
Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2
Commodity: Sunflower Oil (RSFO).
Type: Refined, Winterized, Deodorized, Bleached.
Origin: Turkey or other.
Standards: Conform to Turkish Standard TS 886, Ukrainian Standard DSTU
4492:2005 or Russian Standard GOST 1129:2013, European Norm CEN/TC 307
or Standard of production country, and International Standard
Organization ISO/TC 34/SC11, International Food Standards of United
Nations and FAO Codex Alimentarius CODEX STAN 210-1999 Standard for
Named Vegetable Oils.
Quality: Fit for human consumption, free from foreign matter, any other
oil or animal fats.
Color (51/4 Lovibond): 3,5 Red and 30 Yellow maximum, light yellow,
clear and transparent.
Odor: Neutral odor, without an artificial odor additive.
Visibility: Without any deposition and blurriness.
Taste: Neutral, without an artificial taste, free from rancidity or any
strange or bad taste and smell.
Shelf Life: 12 months, can be up to 24 months with addition.
Quantity: Up to 10.000 Metric Ton (MT) per month.
Physical and Chemical Analysis Values:
(The values may vary within standards)
Free Fatty Acid, % m/m Oleic Acid: 0,3 g maximum.
Acid Number, mg KOH/g: 0,6 maximum.
Peroxide Value, meq O2/kg: 10,0 maximum.
Iodine Value, WIJS: 94 - 141
Moisture and Volatile Matter, %: 0,2 maximum.
Saponification Value, mg KOH/g: 188 - 194
Unsaponifiable Substances, g/kg: 1,5 maximum.
Insoluble Substances in Ether, %: 0,05 maximum.
Refractive Index, at 40oC: 1,461 - 1,471
Specific Gravity, g at 20oC: 0,914 - 0,923
Soap Content, %: 0,005 maximum.
Halphen Test: Negative.
Mineral Oil Test: Negative.
Sesame Oil Test: Negative.
Cold Test, 5,5 hours at 0oC: Clear.Heavy Metal Analysis:
Iron (Fe): 1,5 ppm maximum.
Copper (Cu): 0,1 ppm maximum.
Lead (Pb): 0,1 ppm maximum.
Arsenic (As): 0,1 ppm maximum.
Fatty Acid Composition (%):
Kaproic Acid C 6:0: 0,05 maximum.
Kaprilic Acid C 8:0: 0,05 maximum.
Kapric Acid C 10:0: 0,05 maximum.
Lauric Acid C 12:0: 0,1 maximum.
Miristic Acid C 14:0: 1,0 maximum.
Palmitic Acid C 16:0: 4,0 - 7,6
Palmitoleic Acid C 16:1: 0,3 maximum.
Margaric Acid C 17:0: 0,2 maximum.
Heptadecenoic Acid C 17:1: 0,1 maximum.
Stearic Acid C 18:0: 2,1 - 6,5
Oleic Acid C 18:1: 14,0 - 71,8
Linoleic Acid C 18:2: 18,7 - 74,0
Linolenic Acid C 18:3: 0,5 maximum.
Arachidic Acid C 20:0: 0,1 - 0,5
Eicosenoic (Gadoleic) Acid C 20:1: 0,3 maximum.
EicosadienoicAcid C 20:2: 0,05 maximum.
Behenic Acid C 22:0: 0,3 - 1,5
Docosenoic (Erusic) Acid C 22:1: 0,3 maximum.
Docosadienoic Acid C 22:2: 0,3 maximum.
Lignoseric Acid C 24:0: 0,5 maximum.
Nervonic Acid C 24:1: 0,05 maximum.
Nutrition Facts in 100 gram:
Energy Value: 886 kcal / 3641 kjoule
Total Fats: 100 g
Saturated Fats: 11 g
Monounsaturated Fats: 27 g
Polyunsaturated Fats: 62 g
Trans Fat: 0 g
Protein: 0 g
Carbohydrate: 0 g
Sodium:0 g
Cholesterol: 0 g
We are able to supply in packings following:
Glass Bottles: 250, 500, 750 Mililiters and 1 Liter each (for Extra
Virgin and Virgin Olive Oils only).
PET Bottles: 1, 2, 3 and 5 Liters each.
Tin Cans: 4, 5, 10 and 18 Li
