-Placing keypad or logo sticker on screw cover type
1. It can be placed keypad or logo sticker on the cover.
2. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
3. Available 18 kinds sizes from 80x130x35 mm to 180x255x125 mm
4. selectable gray cover or clear cover.
5. Available stainless steel wall mounting bracket.
20 Wall Finishes Suppliers
Short on time? Let Wall Finishes sellers contact you.
1. Molded hinge & latch design is easy to separate the cover from the base for printing or processing holes & cutting.
2. It protects inner components from dirt, dust, oil, water by roof guard on top & cover gasket.
3. Type 4X&IP67 for indoor &outdoor application by neoprene gasket seal
4. Available 50 kind sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket.
1. Available 2 plastic type of non-flush handle screw(included) or flush cross screw(optional)
2. Reinforced self-threaded design
3. Type 4X & IP67 for indoor & outdoor application by neoprene gasket seal
4. Available 50 kinds sizes from 50x65x45 mm to 380x560x180 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket.
1. Stainless steel hinge & latch type keeps water proof rating even though opening the cover frequently.
2. Changeable hinge & latch size or addable hinges & latches according to box size in order to keep more strong water proof rating
3. Type 4X&IP67 for indoor & outdoor application by neoprene gasket seal
4. Available 81 kinds sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Optional for modifying all latches instead of hinges
7. Available stainless steel wall mounting bracket.
* substitute of 'LOCTITE 401'
* EU RoHS compliant product
* Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments.
* Cures at room temperature (20C to 30C) and does not require special curing equipment.
* Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines.
* Transparent and low odor. Works well with any use and material to give a clean finish.
* Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
Capacity ------------------------------------ up to 4000 cmm
Pressure ------------------------------------- up to 200 mmaq
Inlet size --------------------------------- 300 up to 2000 mm
Casing thickness -------------------------- 1, 5 up to 16 mm
Impeller types ------------------ ac, as (adjustable pitch)
Motor frame size ------------------------------- 63 up to 315
- electricity supply ; single or three-phase to suit a wide range of voltages and frequencies
- motors maker ; korea & overseas ex e, ex d
Drive type ----------------- coupling-, belt- or direct drive
Casing form? combined casing, swing out shot casing
Surface treatment --- primer, finish, hot-dip galvanized
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
Hello, This is Jason Lee from Angel Co., LTD
Our Angel juicer could extract from Core nutrition deep inside plant cells Even extracts vital nutrients contained in seeds
we have been doing business for 35 years of specialized research & development devoted solely to juice extraction
Validated and preferred worldwide especially in the EU
We have Patented "Shattering Helical Gear(SHG TM) extraction technology
Relentless crushing & grinding by twin gears
we have the highest yielding extraction of juice through intense pressure.
A complete breakdown of cell walls to penetrate and extract vital nutrients locked deep inside plant cells could give you the daily nutrition you need.
The state of the art juice extractor constructed entirely of stainless steel
for our family's health benefits
Conept
Nonstick function was added onto premium SS 3-PLY CLAD.
Embossed S/S lines protect nonstick coating on a recessed layer from metal utensil.
A frying pan recognized by a famous Korean chef.
Comparion
Normal s/s pan needs careful heat control before and during cooking.
Surface of coated s/s pan is easily scratched out by metal utensils.
Quality
It has to keep clean borders between raised and recessed layers.
Coating of recessed layer has to be protected and to be clean after all manufacturing processes.
Coating was not damaged after finishing all processes and show clean surface through microscope due to special own process of ultrasonic waves washing.
All lines are clear without abrasion and show well balanced coating.
NAME: High Density Polyethylene
Material:reprocessed HDPE PELLETS
RAW MATERIAL: 100% coated fabric
Pellets from remanants
APPLICATION: HDPE Pipe Grade
HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes. It can also be used for making non-pressure pipes such as double-wall corrugated pipes, hollow-wall winding pipes, silicon-core pipes, agricultural irrigation pipes and aluminumplastics compound pipes.
Density 0.987
Measure the Specific Gravity, according to ASTM D792 and Converted
Melt Flow Index > 50
ASTM D1238
