thermal conductive silicone pad is high-performance,thermal conductive gap filling materials, mainly for the transmission interface between the electronic equipment,and heat sink or product outer coving. With nice stickiness,flexibility, good compression performance and excellent heat conductivity,it make the products can discharge gas from the electronic original and heat sink, to achieve fully conforming and obviously cooling effect.
Product Name: thermal conductive silicone pad
Material: Silicone Rubber
Color: Blue
Size: Custom size, longth is 100m
Thermal conductivity: 1.0~6.0w/mk
Used: High Temperature and insulators
Dielectric breakdown Voltage: >4KV
Volume Receptivity:1.5*10^12O.cm
Specific gravity: 2.3g/cm^2
The product is suitable for control loop, signal protection and measuring circuitry with rated voltage up to 0.6/1kv which works below 180celsius degree. It is widely used in a-energy industry, automatic control units, home appliances, coal mine, power plant and heating units etc.
Feature:
1, excellent plasticity and small bend radius locations
2, good performance in heatproof and cold resistant abilities when working temperature between -60celsius and 180celsius.
3, good performance in mildew resistance, percentage of water that sop up below 0.015%
4, excellent capacity of ozone aging resistance, ultraviolet radiation aging resistance and atmosphere aging resistance
5, cable with shield is lightning-proof, electromagnetism resistant and can poise the power
6, you should connect the ends of the shield to the earth when you are installing the cable with shield. Make sure that do not break and loosen the shield, otherwise the capacity of the shield will reduce very heavily.
Cas no: 7440-02-0 Eninec no: 231-853-9 Mf: ni
Grade standard:industrial, reagent Purity:20nm 99.9%. 40nm, 70nm, 100nm 99.8% Appearance: black powder
Application:catalyst Size: 20nm 40nm, 70nm, 100nm Shape:spherical
Note: we can supply different size products of electrode materials nickel powder according to client's requirements.
Product performance
Nickel nanoparticles is a high-performance electrode materials in fuel cells which can replace the precious metals platinum, thus greatly reducing the cost of the fuel cell.
Product: Industrial Grade Silicone
Source: China
MOQ: 25 MT
Specifications:
Si (Silicon): 99% min
Fe (Iron): 40% max
Ca (Calcium): 0.02% max
P (Phosphorus): 0.0030% max
Al (Aluminum): 0.50% max
Others (each): 0.10% max
Custom Specifications Available:
We offer customization to meet specific requirements. Contact us with your desired specifications, and our team will tailor the product to match your needs.
High-purity silicon metal is used by many industries. In the chemical industry it is used for producing silicon compounds as well as silicon wafers used in photovoltaic solar cells and electronic semiconductors. And aluminum manufacturers use it to improve the already useful properties of aluminum. When used with aluminum, silicon improves its castability, hardness and strength.
Besides, aluminum demand has been growing steadily in recent years, as a reflection of the economic activity in both the developed and developing word. This demand of lighter and more economical material has triggered a growth in Silicon metal consumption by aluminum manufacturers.
That said, silicon compounds are the raw material for a large and growing number of industrial and consumer products such as:
Silicone rubber parts
Urethane foam
Sealants
Adhesives
Lubricants
Food additives
Coatings
Polishes and cosmetics
Silicon Metal Garde is below, please let me know if you are interested.
#AluminumAlloys #Silicones #SolarPanels #SiliconMetal #441 #IndustrilSilicon
Grade Si max. Fe max. Al Max. Ca max.
97 silicon 97.0% 1.5% 1.0% 0.3%
Silicon Metal 553 98.5% 0.5% 0.5% 0.3%
Silicon Metal 551 98.5% 0.5% 0.5% 0.1%
Silicon Metal 441 99.0% 0.4% 0.4% 0.1%
Silicon Metal 421 99.3% 0.4% 0.2% 0.1%
Silicon Metal 3303 99.3% 0.3% 0.3% 0.03%
Silicon Metal 2202 99.5% 0.2% 0.2% 0.02%
Size: 10-100mm,90%min. or as per the requirement of customers
Packing: 1000kg net each bag
Place of Origin: Guangdong, China
Brand Name: CMAI
Model Number: CM195
Processing Service: Moulding, Cutting
Colors: Custom color
LOGO: Custom sample
Type: Value
OEM/ODM: welcome
size: Custom size
Feature: Sustainable
Brief description
YJS-525 is medium hardness silicone with hardness Shore A 25. It is a kind of of two- component materials consisting of a flowable part A which when mixed with the curing agent or catalyst,cures at room temperature by a condensation recation. It is widely used for resin, gypsum, concrete/cement and artificial stone molding.
Features
-Easy to demould
-Good resistance to tearing
-Good elastic
-Good tear&tensile strength
-Dimensional stability in time ( deformation - shrinking only up to 0.3 % )
-Remarkable resistance to high temperatures (up to 200 - 220â?? )
-Final curing at room temperature
Specification
Typical general characteristics
Inspection Method Value
Product data (Catalyzed A+B) YJS-525
Hardness Shore A 25�±2
Mix Ratio A:B 100:2
Color / White
Pot life 25 �°C (77F) 30-40mins
Curing time 25 �°C (77F) 3-4 hours
Mixed viscosity mPa.s 15000�±1000
Tear-strength kg/cm â?¥25
Tensile-strength M.pa â?¥4.2
Elongation % â?¥480
Shrinkage % â?¤0.3%
Package
* Small size:1kg/jar A +20gram/jar B, 12 jars in one carton. MAX 336KGS in one pallet
5kg/jar A + 100gram/jar B, 6 jars in one carton. MAX 750KGS in one pallet(metal drum)
5kg/jar A+ 100gram/jar B, 4 jars in one carton. MAX 480KGS in one pallet(plastic drum)
* General size:
20kg/pail A +400gram/pail B, 18 pails or 24 pails or 27 pails in one pallet
25kg/pail A + 500gram/pail B, 18 pails or 24 pails or 27 pails in one pallet
200kg/pail A + 4kg/pail B, 2 pails or 4 pails in one pallet
1kg package
12 jars in one carton. MAX 336KGS in one pallet
5kg metal drum
6 jars in one carton. MAX 750KGS in one pallet(metal drum)
5kg plastic drum
4 jars in one carton. MAX 480KGS in one pallet
20kg or 25kg plastic drum
18 pails or 24 pails or 27 pails in one pallet
20kg or 25kg metal drums
18 pails or 24 pails or 27 pails in one pallet
200kg metal drum
2 drums or 4 drums in one pallet
Storage
YJS-525 has a shelf life of at least 12 months in the sealed container between 5 C and 30 C. If the material is kept beyond 12 months it is not necessarily unusable, but a test should be performed on the product to check suitability to the application
Metallic silicon, also known as crystalline silicon or industrial silicon, is mainly used as an additive for non-ferrous alloys.
Metallic silicon is a product made of quartz and coke smelted in an electric furnace. The content of the main component silicon is about 98%, and the other impurities are iron, aluminum, calcium, etc.
In industry, silicon metal is usually produced by reducing silicon dioxide by carbon in an electric furnace. Chemical reaction equation: the purity of silicon prepared by SiO2+2C Si+2CO is 97 98%, which is called metallic silicon. Then it is melted and recrystallized, and impurities are removed with acid to obtain metallic silicon with purity of 99.7~99.8%.
Metal silicon particles: 1-200mm
silicon metal should be used to produce organic silicon, produce high-purity semiconductor materials and prepare alloys with special purposes.
(1) Production of silicone rubber, silicone resin, silicone oil and other silicone.
(2) Manufacture high-purity semiconductors.
(3) Prepare alloy.
(4) It is an excellent antioxidant in refractory and powder metallurgy industries.
Our company can provide various specifications and models of metal silicon blocks, particles and powders according to customer requirements.
ferro silicon nitride powder is applicable to stainless steel smelting, special alloy steel smelting, oriented silicon steel smelting and other casting industries.
As a new type of refractory material, it is applied in the metallurgical field, such as metallurgical furnace body, furnace mouth seal, ironmaking furnace outlet, iron hook amorphous material and nitrogen additive in the steelmaking industry.
Silicon nitride material can be used as abrasive material for abrasive tool manufacturing, and can also be used in chemical fields such as acid resistance, alkali resistance and corrosion resistance.
In terms of steelmaking, granular ferro silicon nitride is mainly used in the production of oriented silicon steel at the initial stage, and it can stably supplement a certain amount of nitrogen for molten steel.
English name: Ferro silicon
Molecular formula: FeSi
CAS NO.:8049-17-0
Density:6.37
Melting Point: 1360
Water solubility: insoluble in water and acid.
Appearance : grey cubic crystal
Storage conditions Airtight, cool, ventilated and dry place at room temperature.
Application:
1.Ferro silicon is often used as deoxidizer in steel making.
2.Ferro silicon / FeSi can be used as alloy elements join agent, widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon-steel.
3.Ferro silicon / FeSi is used as a reductant in ferroalloy(SiMn) production and chemical industry.
4.In iron industry, ferro silicon can be used as inoculant and nodulizer.
Our company is a professional Silicon Metal manufacturer in China. We have produced Silicon Metal for 10 years with good quality and competitive price.
Our products includes different grades such as 411/421/521 and so on. Now we have business relationship with many large clients, such as Japan Shin-estu, the United States Dow Chemical Company etc.
