Polyethylene terephthalate, commonly abbreviated PET, PETE, or the obsolete PETP or PET-P. Usually clear ,strong, lightweight plastic, rigid, has good barrier to gas and moisture, mechanical, thermal, and good chemical resistance, excellent electrical insulating properties, shatter-resistant, Used for injection molding, extrusion, blow molding and thermoforming.
Applications:
Produce films and sheets blow molding used for capacitators, graphics, film base and recording tapes etc, fabrics, automotive, electronics, packaging foods and beverages, and electrical components and transparent applications.
Polyethylene terephthalate, commonly abbreviated PET, PETE, or the obsolete PETP or PET-P. Usually clear ,strong, lightweight plastic, rigid, has good barrier to gas and moisture, mechanical, thermal, and good chemical resistance, excellent electrical insulating properties, shatter-resistant, Used for injection molding, extrusion, blow molding and thermoforming.
Applications:
Produce films and sheets blow molding used for capacitators, graphics, film base and recording tapes etc, fabrics, automotive, electronics, packaging foods and beverages, tand electrical components and transparent applications.
Product name : W17.5gm (clear/light blue/dark blue) preform 30/25 neck finish
Product code : 04-wp-17.5gm-(c/lb/db)-30/25
Color : Clear , light blue & dark blue
Specification:
Weight : 17.5 gm ª 0.2 gm
Intrinsic viscosity : 0.73 dl/g ª 0.02
Residual acetaldehyde content : Maximum 4 ppm & average 3 ppm
Over all height :93.03 mm ª 0.5
Neck finish : 30/25 high neck finish
Diameter below support ring :28.00 mm ª 0.15 mm
Application : For mineral water without gas
Body diameter : 20.5 mm ª 0.25 mm
Bottle capacity : 500 ml v 650 ml
Thickness : 2.54 mm
Raw material :
Name : Standard pet resin
Intrinsic viscosity : 0.76 dl/g ª 0.02
Acetaldehyde content : < 1ppm
Packing :
In steel cage :
In jumbo carton :
In small export carton : 15936 pcs
r-PET granules
Recycled PET using the latest technology of Erema Vaccurema Prime
Uses super clean flakes process
APPLICATION for food contact packaging end product
Grade E1 Â for PET Sheet and PET Bottle Application (Injection and Extrusion Process)
r-PET Flakes Specification
r-PET Flakes Grade E1 / Product Code BC-003 / for PET Sheet and Erema r-PET Chips
Specification Values
Color Transparent Blue 80 % + Clear 20%
Delivery Form Flakes
Mechanical Characteristic
Specification Values Unit Test Method
Flakes sized < 12.5 Mm EN-15348:2007 Annex-A
Bulk Density 300 +/- 50 kg/m3 ISO-12418-2 Annex-E
Physical / Chemical Characteristic
Specification Values Unit Test Method
Moisture < 1 % EN-15348:2007 Annex-A
Specific Weight ~ 1.35 g/cm3 EN-15348:2007 Annex-C
Purity Values
Specification Values Unit Test Method
PVC 0 to 50 ppm EN-15348:2007 Annex-D
Yellowish Flakes 0 to 10 ppm EN-15348:2007 Annex-D
Glue 0 to 10 ppm EN-15348:2007 Annex-D
Metal 0 ppm EN-15348:2007 Annex-D
Other Color ( Opaque Flakes ) 0 to 10 ppm EN-15348:2007 Annex-D
Polyolefin 0 to 10 ppm EN-15348:2007 Annex-D
Other Polymer (PET-G, A-PET etc.) 0 to 10 ppm EN-15348:2007 Annex-D
Organic 0 to 50 ppm EN-15348:2007 Annex-D
Packaging Quantity
Bulk PP Bag (95 x 95 x 250 cm) approximate 950 +/- 100 Kgs
Note : Value will vary upon Sales Department Request and Special Approval
Product pet bales Premium quality
Pet percentage 100%
Average total no. Of bales in one container 63
No. Of clear pet bales in one container 58
No. Of color pet bales in one container 5
Impurities 100% free from impurities; hde, pp, aluminum, paper/cardboard, wood, rocks, rock stone, mud, colored pet
We can Supply Plastic Granules PET RESIN JADE CZ-302 and many other plastic raw materials direct from the Manufacturer in China to any destination port in the world with good prices.
At the same time we can supply Plastic raw materials direct from SABIC in Saudi Arabia.
