A&S Transmitter Co., Ltd. provide all types of Yokogawa Pressure Transmitters:
Yokogawa Y/11AL Pneumatic Absolute Pressure Transmitter,
Yokogawa P10 series pneumatic pressure transmitters,
Yokogawa DPharp EJX series pressure transmitters,
Yokogawa DPharp EJA-E series pressure transmitters,
Yokogawa DPharp EJA series pressure transmitters,etc.
Model:
Yokogawa Temperature Transmitter YTA110
Yokogawa Temperature Transmitter YTA310
Yokogawa Temperature Transmitter YTA320
Yokogawa Temperature Transmitter YTA70
Yokogawa Temperature Transmitter YTA50
A&s transmitter co., ltd. Provide all types of fuji pressure transmitter
Fuji pressure transmitter model fkh
Fuji pressure transmitter model fka
Fuji pressure transmitter model fkg
Fuji pressure transmitter model fkp
Fuji pressure transmitter model fkb
Fuji pressure transmitter model fkw
Fuji pressure transmitter model fkc
Fuji pressure transmitter model fkd
Fuji pressure transmitter model fkx
Except the level transmitter, A&S Transmitter Co., Ltd. also can provide below products:
pressure transmitter,flow transmitter,temperature transmitter,differential transmitter,level gauge and flow meter.
Except the level transmitter, A&S Transmitter Co., Ltd. also can provide below products:
pressure transmitter,flow transmitter,temperature transmitter,differential transmitter,level gauge and flow meter.
Turbine generator partspower transmitter HAA-D1
Dongfang Yoyik Engineering Co., Ltd is located in Deyang, Sichuan, provides different kinds of industrial products and brands. Our company is specialized in researching and developing hear-resisting and wear-resisting materials. As a pump and valve manufacturer ourselves, we also offer other brands both domestic and from abroad.
YOYIK provides multiple types of spare parts and equipments for power plant :
#DF-power transmitter HAA-D1-DF
Gapmeasupe Probe GJCT-15-E
VALVE COVER D600B-265500A001
RTV epoxy adhesive 793
Rubber gasket 4Q5440
Level measuring transmitter CEL-3581A/GF
HR anti-corona varnish 1244 F-class room temperature dried
steam turbine LP cylinder sealing grease
insulating dowel taper pin 4B2337
insulating hose (1/4) 2Q4513
sealant T2075
rotor slot wedge 3Q6195
insulating box 3F14206.2
Limit switch box AM014A0-2H
PET fiberglass tape 0.1*25 1Q3301-33
generator end cap sealing grease T2575
TiteSealHydrogen sealing Sealant WH53351JG
slot wedge with hole 4Q9844
F-grade modified epoxy glass fiber FJ6189
PRESSURE SWITCH TBN JACKING OI BPSN4KB25XFSP19
Filter SGF-H110*10FC
fiberglass strip �?8
Sealant gun 04C0529
PET fiberglass tape 0.1*25 1Q3301-33
brush holder Q5C112.567.01MS
oil sealing & oil baffle cover glass cloth tube 3640
air-dry clear insulating varnish H31-2
TITESEAL T20-66
Cylinder sealing grease DFSS-2 2.5KG
SOCKET 1158M231-2
Dacron glass fiber strip �?5
THERMOMETER WTYY-1021
SENSOR LVDT FOR BFPT GOVERNOR 3000TD
power transmitter HAA-D1
grease gun 5D463.338 T15
PET fiberglass strip �?5
mannual grease gun KH32
epoxy glass fiber board 3240
High temperature nut with groove GH4 D600B-261000A001
RTV adhesive 793A
epoxy adhesive 6110
insulating water pipe assembly 1Q1632
TiteSealend cap Hydrogen sealing Sealant T20-75
H-grade varnished glass cloth tape 2450 0.15*25
insulating sleeve 4Q12825
O-RING Part: 709
epoxy ester air-dry red insulating varnish 9130
Servo valve MOOG 761K4112
insulating strip
epoxy phenolic glass cloth tube 3640 �?17*�?21*31
TiteSeal steam turbine generator Sealant WH53351JG
Neoprene rubber sealing gasket
High temperature stud D600B-271000A020
RTV potting adhesive DECJ0704
RTV epoxy adhesive DECJ0792
Epoxy dipping adhesive 792
EMERGENCY OIL PUMP (EOP) 125LY-32-1
fiberglass strip �?8
TERTIARY OIL PUMP (TOP) 125LY-36-1
Gapmeasure Transmitter GJCF-15
resin 473ml
slot Sealant HDJ892
Sealant T25-66
RTV HR anti-corona varnish DECJ0701
power transmitter HAA-D1
Stainless Steel Receivers used for receiving the solvent in the process of production in Herbal Extraction Plants, Pharmaceutical Plants and Chemical Plants.
BROTEK India has all in one, universal, intelligent RF admittance microwave level switch, microwave field generate
alarm when measuring point inserting few millimeters in to the medium, also its not effect by foam condensate and residue,
by using microwave measuring principle possible to detect a conductive and non conductive medium from: liquid, solid
and solid powder. Output of switch only when measuring point is completely cover by medium, also its measuring point
has no dead end and is hygienic so level switch is suitable for CIP (Clean-in-Place), WIP (Wash-in-Place) and
SIP (Sterilization-in-Place), available with different process connection as per industries requirement, and different
temperature version for set up to 200 deg C
Built-in BY682E GNSS high-precision positioning and heading board, support BDS: B1, B2; GPS: L1, L2C, L2P; GLONASS: G1, G2; QZSS: L1, L2;
Support single-system or multi-system joint solution;
Embed new generation of RTK algorithm engine, more intelligent built-in algorithms and more efficient RTK solutions;
Support three vector RTK solution to further optimize the stability of positioning and heading under dynamic conditions;
9~36V wide voltage input with overcurrent and reverse connection protection;
Two RS232 serial ports and one RJ54 ethernet port.
1KW broadcasting transmitter for professional radio station:
Product characteristics:
1 KW transmitter is a professional FM stereo transmitter for radio broadcasting station;
The 1 KW power amplifier unit has high gain, high stability, high efficiency and high redundancy;
The exciter unit use advanced Digital Signal professor (DDS+DSP) so it can provide over CD level sound quality;
The MCU control system can accurately protect transmitter from damage caused by over-current, over-voltage, over-VSWR, or over-temperature.
1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse.
2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface.
3. The wiring should be strictly in accordance with the instructions of our company.
4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument.
5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds.
6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct.
7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse.
8.The quality assurance period is 12 months.
Intelligent Operation Method
1. LCD shows the output percentage or process pressure. Press the S key to select the display percentage or pressure.Press Z key to select pressure unit KPa or Mpa when displaying pressure.
2. Press S+Z key for 8 seconds, then release it at the same time, press Z key to set the zero value; Press the S key set the range. note: this function can only be triggered once an operation.
3. Adjustments to zeros or ranges may cause changes in the displayed options, i.e.The percentage being displayed becomes pressure or KPa becomes Mpa, etc. All these changes are shown only in the display, and have no effect on the internal parameters of the transmitter, pressure detection and current output. After adjusting the zero point and range, the S and Z keys can be used to select the desired percentage or pressure.
4. Zero-setting in field pressure-free state: 30 seconds after pressing S+Z key, the display shows zero time at the same time release the two keys, that is, zero.
Simulated operation method
1.Zero-setting in pressure-free condition: The potentiometer with the word "zero" on the circuit board is adjusted to zero when it is displayed on the spot.(Note: Clockwise increase, counterclockwise decrease)
2.The potentiometer marked "range" on the circuit board can not be adjusted without standard pressure, so as to avoid the disorder of measurement range.
CR-602 series high temperature high pressure liquid level sensor is suitable for the continuous measurement of liquid(things) level of high pressure equipment,container in industrial production process.Transmit output 4-20mA direct standard signal. It can be directly used in connecting use and automatic control of electric â?¢ type instrument and computer. The tube is made of special material which make it can work under 250 for long time. Special designed automatic sealing structure , the greater the pressure the sealing stricter.safely avoid medium leakage.
The core components of the product are converted into standard electrical signals (generally 4-20mA) by using advanced radio frequency capacitance detection circuit to conduct precise temperature compensation and linear correction through 16-bit single-chip microcomputer. 485 communication protocol can be used in system configuration. All series of transmitters have the function of on-site calibration. Users can press the button to carry out zero point and range, so as to meet the different requirements of various complex places.
The product conforms to GB3836.4-2000ã??Electrical equipment for explosive gas environment part 4: intrinsically safe type Iã??and GB3638.1-2000ã??Electrical equipment in explosive gas environment part 1: general requirementsã??explosion-proof mark:Exdâ?¡C T6, it is suitable for 0,1,2 zones which contains â?¡A-â?¡C category,T1ï½?T6 group explosive gas mixture.This product has also been awarded explosion-proof certificate after testing qualified through national explosion-proof inspection center.
Measuring scopeï¼?0.01ï½?10m
Precision: 0.5
Pressure scope: -0.1MPaï½?32MPa
Tube temperature resistant: -50ï½?200
Tube diameterï¼?Ï?8
Tube Materialï¼?PTFE
Storage temperatureï¼?-55ï½?+125
Output signal: 4ï½?20mAã??4-20mA with HART communication , 485 communication with 4-20mA
Supply power: 12-28VDC (intrinsic safety type needs to be powered by safety grid)
Fixed wayï¼?threaded installationï¼?M20*1.5 M27*2
Flange installation: DN15,DN25,DN40,DN50,DN80, special requirements can be customized.
The series of pressure transducers use imported high-quality pressure sensors and special integrated modules, through fine temperature, zero, full range, and non-linear compensation to achieve accurate measurement and transmission of pressure changes in liquid, gas, steam and other media.
Technical Index
Measuring medium: liquid, gas, steam
Pressure range: -0.1MPA~0~60MPA
Accuracy grade: ±0.2%FS, ±0.5%FS
Stability: â?¤0.2%FS/year
Temperature drift: â?¤0.02%FS/(range 0~70)
Environment temperature: -20+85
Storage temperature: -20+85
Output signal: 4-20mA or 1-5VDC
Supply voltage: 12-40VDC
Allow overload: two times the quota voltage
Explosiveproof grade: intrinsically safeia II C T6 flameproof dII C T6
Wetware material: 316 stainless steel and 1Gr18Ni9Ti
Shell material: die casting alloy aluminum,surface epoxy spraying
Pressure interface: M20X1.5
Weight: ordinary 0.75kg, with on-site instructions 1kg
Structure Type
x1
Connection
x2x31
x4
The link mode and output signal of the compact tranmitter are as follows:
Two-wire system:
1 Positive power supply
2 Negative power supply
3 Empty
4 Shell
Three wire system:
1 positive power supply
2 Negative power supply (Negative sharing with signals)
3 Signal+
4 Shell
x5
The connection mode of aviation plug transmitter is as follows:
Two-wire system(direct outlet type)
1 Red wire connection positive power supply
2 Black wire connection negative power supply
Notice
1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse.
2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface.
3. The wiring should be strictly in accordance with the instructions of our company.
4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument.
5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds.
6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct.
7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse.
8.The quality assurance period is 12 months.
980 Satellite Receivers Transmitters Suppliers
Short on time? Let Satellite Receivers Transmitters sellers contact you.
