Assembly and disassembly of wide range of smd components from small chips to bgas
Microprocessor controlled 3 working modes:
Manual
Time (according to profile settings)
Profile
Using outer software it is possible to:
Control and edit the soldering/desoldering process save unlimited number of profiles
Optimized heating element power and intelligent hot air temperature control almost all smd components can be reworked
Wide scale of air flow regulation, starting from soldering with no risk of blowing off the components and soldering paste to large components (also on multilayer pcbs)
Built-in vacuum tweezer that can be started manually or automatically safe handling of sensitive components
Programming or manual outer system controlling (pcbs pre heater) enables to build a professional smd rework system based on ra-250e
Large, contrast display increases comfort of work and keeps the operator updated about current state of all important parameters
Adding assembly/disassembly hot air station with pre heater and stand we get advanced work station and possibility to perform works impossible so far to do.
Input power: 230 vac
Power consumption: 530 w max.
Air flow control range: 2-20 l/min, +/10%
Temperature control range: 100°c 450°c
Vacuum tweezer: 0.2 bar
Temperature stability: +/2°c
Ext. Dimensions: 200 x 230 x 150 mm
Weight: 4.4 kg
INCOBEX-ELPLAST modular switchgears give fitters the ability as well as facility and flexibility to implement any energy distribution system, e.g. in residential buildings.
The enclosures have a simple design for quick assembly
Epp-36 maximus water heater is designed for industrial use. It has its application in places where a considerable amount of hot water is needed, e.G. An assembly line.
Water temperature modulation from 30°c to 60°c
Electronic power modulation depending on the flow of water
Starts work at such low flow rate as 2, 5 l/min and the minimal pressure of 0, 1 mpa
Larger heating box and bigger surface of heating elements ensure longer life
17 Telecom Assemblies Suppliers
Short on time? Let Telecom Assemblies sellers contact you.
Dispensing type: automatic, with the option of changing the dose of disinfectant liquid
Housing: steel, powder coated
Power supply: Maintenance-free operation of the device on one charge up to 30 days
Batteries: LED indicator signaling system operation and LED indicator signaling low battery level
Colour: gold-black or white-blue (other RAL colors on request)
For use: inside and outside buildings
Refilling: from a multipack (any soap or liquid)
Dimensions: 1600 x 633 x 433 mm
Weight: 25 kg
Assembly: a free-standing station, all bolted together, easy assembly and disassembly of the device
Closing: rear door lock
Regulation: Adjustable foot structure
Additional information: light weight allows easy movement of the device with a stable construction
Production: Product made in Poland
WE ALSO OFFER:
Option to choose station color and place your own logo!
Hire sale option!
Discounts for wholesale orders!
Attractive margins for distributors!
The arm abduction orthosis with abduction angle regulation is an efficient immobilizer for treatment of an arm fracture, a dislocated shoulder or rotator cuff surgery in post-operative and post-traumatic conditions. The arm abduction brace am-ao-kg-01 called clever 1 shall be prescribed by the doctor or professional orthopaedic specialist. The medical expert indicates the immobilization of arm in abducted position for treatment of anterior luxation.
The brace includes upper limb support equipped with two hook-and-loop straps for forearm, one strap for arm and hand resting support with height regulation.The fitting and adjustment of the orthosis is obtained by double belt on the chest/shoulder, which is equipped with front system closure ??? easy to wear and take off, without necessity of re-adjustment of the assembled straps length. The assembling straps are universal length which could be cut to obtain the perfect fitting on body shape.The soft neoprene pads on belts offers usage comfort for patient.
Service lifts
Product Range
Lifts for utilization in restaurants, hotels, hospitals and private homes.
We offer 4 different types of service lifts for different applications:
parting doors at serving height (ISO-A)
Bi-parting doors at floor level (ISO-C)
Hinged doors at floor level (ISO-D)
Cabin with 2 separate compartments (ISO-Z)
Our strengths
In recent years we have become a market leader by focussing high-tech and on quality.
low costs
galvanized construction
short delivery and installation times
pre-assembled plug-in controllers
Installation
90 % of our service lifts are made from pre-installed components. Therefore the installation times are reduced on site by 50 %. Thanks to a ingenious method of construction our service lifts can be used for almost any purpose and can be made according to your specification.
Technical Information
The information given below lists main features of our service lifts. As there are over 160 options available, please do not hesitate to contact us for further details.
Structure
Self supporting steel structure, made of cold rolled special profiles, fully galvanized, pre-assembled in 2 m sections including trunking.
Service lifts (service elevators)
Product range
Lifts for utilization in restaurants, hotels, hospitals and private homes.
We offer 4 different types of service lifts for different applications:
Parting doors at serving height (iso-a)
Bi-parting doors at floor level (iso-c)
Hinged doors at floor level (iso-d)
Cabin with 2 separate compartments (iso-z)Our strengths
In recent years we have become a market leader by focussing high-tech and on quality.Low costs
Galvanized construction
Short delivery and installation times
Pre-assembled plug-in controllers
Installation
PRICE: 3100 USD FOB
Delivery time: 6 days
Payment: 100% prepayment or ESKROW / LC
As the first company in Poland, we have started the production of technologically advanced curtains for professional hygiene.
We have created a completely comprehensive product that promotes the improvement of safety and hygiene level in every place. In addition, our certified technology uses a dedicated bactericidal, fungicidal and virucidal preparation based on colloidal silver, which maintains active activity up to 72 H
APPLICATION:
The use of curtains for hygienization is very wide. Due to its mobility and versatility, it can be used in places such as:
Hotels Shops Restaurants Public places Schools Factories Airports Hospitals and clinics Film sets
SET CONTAINS:
- Hygienic curtain - Tank 51 - Additional hand disinfectant dispenser - Hygienic mat - Moving wheels (4 pcs.)
BENEFITS:
-iV
Quick disinfection Simple to install Mobile Universal
ASSEMBLY:
If the curtain will be used as a stationary unit, it should be screwed to the floor. If the curtain will be used as a mobile unit, the wheels must be screwed on both sides.
PRICE: 3100 USD FOB
Delivery time: 6 days
Payment: 100% prepayment or ESKROW / LC
How IT work Movie : https://youtu.be/0Ok1_ildqhk
As the first company in Poland, we have started the production of technologically advanced curtains for professional hygiene.
We have created a completely comprehensive product that promotes the improvement of safety and hygiene level in every place. In addition, our certified technology uses a dedicated bactericidal, fungicidal and virucidal preparation based on colloidal silver, which maintains active activity up to 72 H
APPLICATION:
The use of curtains for hygienization is very wide. Due to its mobility and versatility, it can be used in places such as:
Hotels Shops Restaurants Public places Schools Factories Airports Hospitals and clinics Film sets
SET CONTAINS:
- Hygienic curtain - Tank 51 - Additional hand disinfectant dispenser - Hygienic mat - Moving wheels (4 pcs.)
BENEFITS:
-iV
Quick disinfection Simple to install Mobile Universal
ASSEMBLY:
If the curtain will be used as a stationary unit, it should be screwed to the floor. If the curtain will be used as a mobile unit, the wheels must be screwed on both sides.
Goods lifts
ISO-MAX
Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m
Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V.
Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings:
corrosion-proof
self-supporting galvanized steel structure
shaft pit depth 270 mm only
machine room less lift
accessible spaces underneath the shaft possible
easy mounting steel shaft cladding deliverable (no fire protection)
space saving installation - compact construction
pre-assembled for easy installation
no brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffer 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
Special safety gear (type tested)
Hinged doors
manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities
with side frames made of galvanized steel according to drawing
door locks type-tested by T_V-authorities
Machine room door
double hinged door with sash lock
with side frames made of galvanized steel according to drawing
Drive unit
Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
call and send control with 24 V, safety circuit 230 V
pre-wired with plugs
adjustable and time-limited despatch delay device (1-5 s)
electronic overload contact
acoustic arrival signal
position indicator on each entrance
thermal motor protection as main switch pre-wired on control panel
machine room light with socket
ISO-PM 1000
Capacity: 1000 kg
Goods lift along directive 95/28/EG with max. 2 persons
corrosion-proof
self-supporting galvanized steel structure
shaft pit depth 270 mm only
cabin push button with send control - landing push buttons with call and send control
machine room less lift
accessible spaces underneath the shaft possible
easy mounting steel shaft cladding deliverable (no fire protection)
reducing of interference prone by setting a safety feature instead of cabin door
space saving installation - compact construction
pre-assembled for easy installation
no brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffet 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
safety light curtain
cabin light - cabin ventilation
type tested safety gear
special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call
special safety gear (type tested)
special cabin apron (type tested)
Hinged doors
manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities
with side frames made of galvanized steel according to drawing
door locks type-tested by T_V-authorities
Maintenance room door
hinged door with sash lock
with side frames made of galvanized steel
Drive unit
Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
Call and send control
Cabin push button with send control
Landing push buttons with call and send control
Micro-processor technique in controller cabinet
Selector with absolute encoder
Goods lifts
The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m.
Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V.
Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings:
Corrosion-proof
Self-supporting galvanized steel structure
Shaft pit depth 270 mm only
Machine room less lift
Accessible spaces underneath the shaft possible
Easy mounting steel shaft cladding deliverable (no fire protection)
Space saving installation - compact construction
Pre-assembled for easy installation
No brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffer 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
Special safety gear (type tested)
Hinged doors
Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities
With side frames made of galvanized steel according to drawing
Door locks type-tested by t_v-authorities
Machine room door
Double hinged door with sash lock
With side frames made of galvanized steel according to drawing
Drive unit
Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
Call and send control with 24 v, safety circuit 230 v
Pre-wired with plugs
Adjustable and time-limited despatch delay device (1-5 s)
Electronic overload contact
Acoustic arrival signal
Position indicator on each entrance
Thermal motor protection as main switch pre-wired on control panel
Machine room light with socket
Automatic lift
Beside our standard service lifts we also offer semi-automatic or automatic Tote-Box-Systems.
The basic system and components are similar to the per-assembled construction of our service lifts. The automatic lift includes vertical bi-painting doors with 24 V motor, to open and close the door automatically, independent of the cabin doors. In the car a driven belt device will draw into and eject from the cabin the tote boxes. In front of each landing is a load- and unload- roller conveyor to carry 2 or 3 boxes and code lines at each box for easy pre-setting.
Structure
self supporting and free standing steel structure made of cold rolled galvanised profiles, pre-mounted in 2 m - sections with trunking and t-guides
Lift machine (made in Germany)on top of the shaft, with hardened twin groove sheave, speed 0,40 m sec. The machine is mounted on steel beams, having a high quality reduction gear, magnetic disc brake and hand wheel, protection class IP 54, power supply 400 V 50 Hz, three phase. Speed 0,8 - 1 m sec or frequency control upon request.
Controller
High security through transformer and 24 volt system, pluggable and pre-wired. SPS (computer programmable) control system compressed equipment in a lockable controller box. Each project will be prepared to the clients requirements.
System
Each landing door has its own 24 Volt motor to open and close the door automatically independent of the cabin door. In the car a driven belt device will draw into and eject from the cabin our standard tote boxes.
In front of each landing is a load and unload roller conveyor to carry 2 resp. 3 boxes.
There are photocells in the lift car to read the destination of the box. Our standard tote box is made of heavy duty polypropylene for smooth running, size 400 x 600 x 300 mm. Each box has a slider to set the festinated floor marking easily. The roller conveyors have PVC-rollers. The frame work is made of folded galvanised steel profiles in "office design". The photocells and switches are well protected in the frames.
Operation mode
Set the slider at the box for the designated floor and put the box on the upper roller conveyor. This conveyor has an automatic device to keep the first box away from the landing door and also to keep the second box away from the first. The computer will notify that there is a box waiting and will send the car to pick it up. The door opens automatically after arrival and the belt will draw the box into the car. Photocells read the destination. Door closes automatically and car delivers the box to the floor indicated on the slider. After opening the landing door, the belt ejects the box to the unloading conveyor. Complete automatic operation will be carried out without human assistance or recall.
Options
Capacity of 100 or 200 kg, Car and doors in stainless steel, Speed 0,8 m - 1,o - 3 m/sec, Travel up to 150 m
Offering complete Italian leather shoe insole and midsole production line for men and women footwear. The line consists of 23 machines specified below. All machines in very good condition. Location Warsaw (Poland). Year of manufacture 2000+ with most machines produced in Italy, a number in Germany. Complete photos and information available upon request: Production line consists of: 1. Oildynamic cutting press with movable trolley + electrohydraulic platform (model HSP 588 - ATOM, platform - P1000kp), 2. Guillotine machine for cutting texon and fibre (automatic - model 126/558), 3. Guillotine machine for cutting foam coming with table and rotary drum (manual - model 2328), 4. Cementing machine for solvent adhesives + extractor fan (model MAV 3230 - Angeleri, fan: 250 m3/h), 5. Roller presser for texon and fibre (M2000), 6. Eyeletting machine for attaching steel shanks (MR71 S - Sagitta), 7. Press for moulding steel shanks (custom-made from producer RE-FI), 8. Line for assembling midsoles (STF 2000, 88MV - Apas), 9. Insole moulding machine (P-78 - Banf), 10. Automatic milling machine for insoles (FRA 96 - RE-FI), 11. Insole trimming machine (semi-automatic, OF 3N - Olympia), 12. Automatic shank skiving machine (A33 - SECOM), 13. Skiving machine for texon and fibre (model 95), 14. Groove milling machine (NFM13a - Mohrbach), 15. Bell skiving machine for leather (AV2), 16. Grooving machine for insoles (IS 6/TI - Garfas Macchine), 17. Heavy-duty knife grinder (LX 8.5), 18. Pattern shears machine for undercut (model 012/01), 19. Finishing machine (model 329), 20. Dust extractor fan (AS-30), 21. Automatic collector that collects and counts bevelled pieces (R39), 22. Mechanical conveyor for assembly (M/83), 23. Automatic heat setter (model 360). Also available a complete production line for shoe soles.
RAGGIO is a Polish producer of modern garden decorations and metal wall decorations. We work with several domestic companies to provide the widest possible range of metal decorative products.Among the decorations for the garden, free-standing and wall-mounted openwork panels are the best. A wide selection of designs and assembly options gives a wide range of opportunities for architects of greenery. Garden walls can be mounted to the posts, arranging them to rest areas or grill corners. Decorations can be attached directly to a building wall or fence, giving the unused area an interesting look. A decorative metal panel can be used as a support.
