Find Verified Marine Paint Suppliers, Manufacturers and Wholesalers

Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.

APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).

KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.

STANDARDS
API SP

RETAIL PRICE
30,600 THB (200 litres)
850 THB (4 litres)
205 THB (1 litre)

AUS32 (AdBlue) Specifications.

Product Properties for AdBlue as per the revised ISO22241 standard.

Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).


Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg

Marine engine.

Yamaha Series: FT60GETL, F75FETL, F100GETL, F115BETX, F115BETL, F150FETX
/ Suzuki Series: DF60ATV, DF60ATL-A, DF90ATL, DF115ATL, DF115ATX, DF115BTX-A, DF150TX, DF150TX-A

Parameters
Finish: Clear
Gloss: N/A

Application
Methods: Roller / Brush
Substrate: Rubber, Mango
Exposure:

Formulation

PRODUCT INFORMATION

PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish

DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.

USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces

BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable

PACK SIZE 1 litre, 5 litres

COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart

PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint

PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion

PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.

RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT

PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.

PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit

2019 Evinrude 40 HP E40DRGL Outboard Motor

Engine

Engine Type: Inline 2-Cylinder E-TEC D.I.

Bore x Stroke: 3.62 x 2.60 in. (92 x 66 mm)

Displacement: 52.7 cu.in. (863cc)

Starting: Rope (Electric Accessory)

Dimensions

Shaft Length: 20 in. (508 mm)

Weight: 232 lb. (105 kg)

General

Trim Method: Manual

Propshaft Horsepower: 40 hp

Full Throttle Operating Range: 5500-6000 rpm

Gear Ratio / Shift: 2.9:1

Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode

Alternator: 81 Amps Total / 25 Net Dedicated

Steering: Tiller

Warranty: 3-Year, Non-Declining


Features

Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season.
More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.


Specifications

Engine Model: E40DRGL Graphite
Engine Type: Inline 2-Cylinder E-TEC D.I.
Bore x Stroke - in (mm): 3.62 x 2.60 (92 x 66)
Displacement - cu in (cc) L: 52.7 (863)
Gear Ratio: 2.9:1
Full Throttle RPM Range: 5500-6000 RPM
Weight - lbs (kg): 232 (105)
Starting: Rope (Electric Accessory)
Controls: Mechanical
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator Output*: 81 Amps Total / 25 Net Dedicated
Steering: Tiller
Trim Method: Manual
Trim Range: -4�° to 16�°
Tilt Range: 65�°
Shaft Length - in (mm): 20 (508)
Lubrication: Multi-Point Targeted Oiling
Oil Tank Capacity - gal (L): 2 (1.9)
Recommended Oil: Evinrude / Johnson XD-100 Oil
Recommended Fuel: 87 Octane
Warranty: 3-Year, Non-Declining
Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union

2019 Honda 25 HP BF25D3LRG Outboard Motor

For mid and smaller horsepower needs, there is plenty of punch in the Honda BF30 and BF25. But it is power you will feel and never hear. That because all Hondas are whisper quiet. So extraordinarily quiet, we donot have to put extra dampening insulation in the cowling like most manufacturers do.

Instead we pack em full of features. Like a Center Mount Tiller with up-front controls. The 3 to 3 Induction system that provides smooth, quiet operation. And Autostart Enrichment, which makes starting a breeze.

And of course, the exceptionally durable BF25 and BF30 are backed by the best standard warranty you can get. The end result? More good times on the water.



Condition New

Stock Number BF25D3LRG

Year 2019

Make Honda Marine

Model BF25 L Type

Fuel Type Gas

Vehicle Type Outboard

Category Four Stroke

Engine 4-Stroke SOHC 3 Cylinder - 2 Valves/ Cyl.

Propulsion Single Outboard

Propulsion Type Powered

Number of Engines 1

Engine Type Outboard

Engine Power 25 HP

Dry Weight 160 lbs

2019 Suzuki 40 HP DF40ATL2 Outboard Motor

This is the only engine in the 40 hp class to offer DOHC performance, and also the only engine in its class to incorporate a maintenance-free, oil-bathed timing chain, which provides the outboard with increased durability and maintenance free operation. With larger displacements for increased power and performance, Suzuki's Lean Control System for improved fuel economy and designs that are more compact and lighter in weight than the predecessor, the new DF40A engines also incorporate the Suzuki Troll Mode System. During the 2011 Miami Boat Show, the Boating Writers of America presented Suzuki Marine with the NMMA Innovation Award for the DF40A/DF50A.





Features

Multi Point Sequential Electronic Fuel Injection

Suzuki Lean Burn Control System

Suzuki Troll Mode System

Direct Ignition

Suzuki Easy Start System

Over-Rev. Limiter

Low Oil Pressure Caution

Fully Transistorized Ignition

Timing Chain

Fresh Water Flushing System

Power Trim and Tilt

Suzuki Anti-Corrosion System



Specifications

Recommended Transom Height (inches): L: 20

Starting System: Electric

Weight (lb.): L: 229

Engine Type: DOHC 12-Valve

Fuel Delivery System: Multi Point Sequential Electronic Fuel Injection

Number of Cylinders: 3

Piston Displacement inches (cc): 57.4 (941)

Bore x Stroke inches (mm): 2.85 x 2.99 (72.5 x 76)

Maximum Output HP: 40

Operating Range (rpm): 5000 - 6000

Steering: Remote (Tiller Kit Optional)

Oil Pan Capacity quarts (liter): 2.9 (2.7)

Ignition System: Solid State Direct Ignition

Alternator: 12V 19A

Trim Position: Power Trim and Tilt

Gear Ratio: 2.27:1

Standard Propeller: Optional See Dealer

Propeller Selection: 9 - 17

Specifications

Engine Type: Yamaha T25XWTC High Thrust Four Stroke

Horsepower: 25 hp

Cylinders: 2 cyl

Shaft Length: 25"

Steering: Remote Mech

Starter: Electric + Manual

Weight: 154 lbs

Full Throttle Range: 5000 - 6000 rpm

Displacement: 432cc

Induction System: EFI

Warranty: 3 years

Composition
Active ingredients: hydrocarbon polymer, alkyd solution and siloxane in petroleum solvent.
Appearance
Free flowing slightly milky liquid.
Packing
Available in plastic pail of 18 litres, 7 litres.
Storage
Store at normal room temperature away from sources of ignition.
Ensure containers lid are covered lightly after use.
limitations
Rainshield is designed for static weather resistance and may lessen efficiency is subjected to physical abrasion.
Warranty
5 years subject to terms and condition.

Available in plastic pail of 18 litres, 7 litres.

Direct deal Arman 114 Oil Tanker(Scrap Large Vessel)

Ask for all the documents related to verify the oil tanker.

Send the letter of intent to directly go to the court and purchase.

Tufkote W8568SLM Primer

SGM uses high - performance and environmentally-friendly technology. Its water-based coating packages itself into individual capsules, allowing each to contain its own unique formula and colour. THis creates a one time multi- color spray system that is not only durable, but also effective in mirroring the authentic granite texture.

Advantages:
1. One time , multicolour spray system
2. Colours and paterns can be customized
3. Resistant to stains, fungus, algaue, acid and alkali
4. Washable and easy to maintain
5. High adhesion and anti peeling/ flaking
6. Water - based and eco-friendly
7. Excellent durability against weather conditions.

Parameters
Finish: Clear
Gloss: N/A

Application
Methods: Roller / Brush
Substrate: Rubber, Mango
Exposure:

Formulation

Parameters
Finish: White
Gloss: N/A

Application
Methods: Roller / Brush
Substrate: Rubber, Mango
Exposure:

Formulation