Find Verified Non Adhesive Tape Suppliers, Manufacturers and Wholesalers

Non-woven material obtained by spinning polypropylene microfibers (1-5 microns thick), accompanied by the supply of hot air at high speed. Unlike spunbond, the fibers are whipped and laid directly on the conveyor, without stretching. Meltblown has significant advantages over trradional no ovens. These include greatly increased uniformity, both visual and physical, beter coverage per surface unit, increased or complete water permeability with simultaneous breathability, as well as high filtraaon properes. Meltblown is chaacterized by a significant effect of filtraltraon, absorpon and isolaon. Meltblown is successfully used in filters for respirators, industrial masks, vacuum cleaners, filters for filtering liquids and gases, the prproducon of meal clothing and hygiene products.

density: 25 g / m2

BFE>98%
BFE>95%

SMMS multilayer nonwovens (layers: spunbond-meltblown-meltblown-spanbond) are made from endless polypropylene yarns that are thermally bonded. - SMMS materials serve as a barrier layer that prevents the penetration of bacteria. - Softer than non-woven spunbond - Excellent moisture retention, but at the same time they have good breathability. - Resistant to tearing and stretching, perfectly retain their shape - Resistant to the spread of microorganisms. SMMS materials are intended for use in the medical industry for the manufacture of operating disposable clothing and underwear.

SMMS width: 1.6 m density: 20, 25, 35, 50 g / m2. Also available custum width and color .

Non-woven material obtained from the polymer melt by die-casng using thermal bonding. It is a very light, lint-free, environmentally friendly material. Spanbond perfectly replaces expensive materials, not inferior to them in the thinness of the canvas (while maintaining strength) and breathability. A disnct e feature of the spunbond is its low cost and prpracality compared to tradional m terials. Spanbond, depending on the density, has the widest range of consumpon: fom the use in the manufacture of medical and sanitary products to use as filter materials.

width: 1.4-1.6 m density: 25, 35, 40, 50, 60 gr/m2 62/5000 Spanbond width: 1.4-1.6 m

Granulated plant-derived biomass from EU-approved crops for industrial processing or use as raw material in additive manufacturing.
This material is not a feed product and is not intended for direct animal consumption. In full alignment with the latest EU regulatory protocols, the product complies with all applicable limits for cannabinoid content and is processed to ensure the exclusion of non-approved plant parts.

Key Features:
Sourced from legally cultivated EU-compliant varieties

Granulated biomass, unrecognizable as flower or leaf

Intended exclusively for industrial and technical use

Fully traceable batches with available Certificates of Analysis

Technical Specifications:
CBD content: 1-2%

THC content: less than 0.3%

Moisture content: <10%

Granule size: approx. 6 mm

No psychoactive properties

Compliance Statement:
This product is classified as industrial plant biomass and is not sold or promoted as animal feed or feed material. It is intended for further processing.

CBD content: 1-2%. THC content less than 0.3%.

Packaging Options:
Big Bags 950kg

Country of Origin:
Lithuania

Product Description
Disposable medical mask

Price of product ( USD price or FOB price) :
From 0.065USD/unit

Product origin :
China

Key Specifications/Special Features :
Three-layer mask (non-sterile)
Made of propylene non-irritating, odourless and soft material, free of fiberglass, latex and other allergic substances.
Integrates the nose, elastic bands that do not press against the face and ears
Dimensions: 17,5 x 9,5 cm
The mask meets the requirements of EN 14683, Type II R.
CE certified
BFE > 98%
Shelf life: 2 years"

Minimum Order Size and Packaging details :
Packaging 1, 10, 50 units; Minimum Order Quantity 1 Euro pallet

Quality: Flakes cut to a thickness of 0.35-0.45 to 0.55-0.65, whole grains with a thickness of 0.55-0.65 to 0.8-0.9.
Volume: 15000 mt

Total oil content : 8%-10% (max.)
Type of packaging: Balk
NON GMO

Harvest 2024
GRADE 4
Protein is not be less then 12,5 or not be less 11.5 protein
Moisture-13,5%
Grain broken -1.5%
Wet gluten- 20-22%
The number of drops is not less than 250 seconds
Vitreous is not less than 40%
Nature of at least 750
Humidity is not higher than 14%
Weed admixture is not more than 2%
Grain impurity no more than 2%
IDC no more than 90 units
Fusarium no more than 1%
Bug damage no more than 1%
Pest infestion is not allowed
Volume 10000 mt

Total moisture content : 7%-9% (max.)
Crude Protein /on total weight: 29%-30%
Type of packaging: Balk / big bags
NON GMO
Volume: 1500 mt on Sep/OCT

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.