Find Verified Locks Handles Suppliers, Manufacturers and Wholesalers

Advantages of panel – frame houses:
Our houses are ecologic and warm, assembled fast (within couple weeks). Mounting and assembling could be done in any season; there are minimal so called wet production processes. Fast mounting does not require temporary premises or big storage rooms on a site. There is a possibility to disassemble, which is important for temporary premises. The homes could be finished by the homeowners themselves. Elements (walls, floors and roof) of wooden panel house are prefabricated and preassembled from structural panels in our specialized workshops. It allows us to achieve high quality of work, because when the works are carried out inside of premises, elements of the house are affected by unfavourable weather, it is easier to control working conditions and there are more possibilities to use special equipment.

Mounting:
The houses are usually mounted straight from the trucks or containers by means of a crane, which is as a rule needed for the first 2-3 days or could be even a week, if the house is bigger. Average size building fits into two – three trucks. For the assembly of a house, modern sealing materials, galvanized fasteners and anchors (for anchoring to the foundation) are used. Our houses can be mounted and assembled by other subcontractors - construction companies or even homeowners themselves.

Composition of external wall panels:
As a standard, gypsum plasterboard, which has a fire factor of 1 hour, or wooden cladding planks and non-flammable PE vapour barrier film are installed from the inside of wall panel. Oriented strand board (OSB) or wooden cladding planks along with the wind protection film are installed from outside of wall panels. Mineral wool insulation is preinstalled between the vertical studs inside of panels. Other compositions of walls are also possible based upon requirements set by the country code and individual.

Composition of internal wall panels – partitioning and load-bearing walls:;
Timber frame is made from 95÷125 mm and 145÷195 mm thickness planed off studs respectively, mineral wool insulation is preinstalled for sound isolation. Panels are covered by plasterboards or other above mentioned materials.

Floor – ceiling platform:
Floor is produced from panels, which are made from 60x220 or 80x220 mm cross-section beams (depending upon planned static loads). On the upper side of the panel 22mm OSB is attached to improve the stiffness. In order to achieve minimal sound isolation cavities of the platform are filled by 100 mm insulation of mineral wool and full thickness is filled near external walls.

Roof construction:
Roof is produced out of joists and rafters, cross-sectional dimensions of which are usually 50÷60 x 200÷220 mm. Roof beams - joists are made from glued laminated/ glulam wooden beams based on static calculations. As per customer request, where possible, we try to preassemble roof panels including attic finishing materials and roof assembly including covering materials. Structural elements of the roof can be supplied loose or preassembled as roof panels.

Thermal resistance of timber frame panel houses:
Depending on the chosen materials, the resistance of walls is not less than 5.00m2 K/W and the resistance of roof is not less than 6.00 m2 K/W. Usually, additional finishing of outer walls is recommended for panel houses, therefore further thermal insulation is also possible.

Special installations:
Heating pipes, communication lines (low current - alarm systems, internet and television) and water supply and waste water systems are usually laid inside the flooring on the basis of chosen technical system. Panelled walls are designed and construed having in mind abovementioned systems and connections. These jobs are usually done by the local skilled and authorized personnel.

Facade of the house:
An individual outlook for the exterior of the house could be obtained by chosen materials. External decoration of panel walls is carried out using various materials: cladding, cement, stone plates, boards, brick finishing or plastering.Upon request of a customer house set could be delivered with preinstalled windows and entrance doors, garage doors, roofing cover, external staircase, perform their installation.

Price:
It depends upon area of external, internal walls, floor, construction of roof, balconies, thicknesses of elements and their finishing, number of elements, scope of a project. The price for a mirror or typical project is reduced. First, we estimate the price of basic structures of the house and at the moment varies from 260 EUR to 600 EUR per one square meter of living area. In order to have the price for the complete house, you have to know what kind of: floor cover; plumbing system; type of heating system; windows material, U-value, locks, colour, opening directions, etc.; type of wood for the external (outdoor use) staircase; roofing cover and rain drainage system; external and internal decoration / finishing materials such as plasterboards or wooden cladding, etc. Final price of individual project could be estimated knowing all the details and materials, in the best case when detailed working drawing are issued and based on the latest changes an updated specification – list of materials is issued.

We are Lithuanian company, making furniture components from wood and metal.. If you need more photos with metal or wood legs please do not hesitate to contact me ASAP, thanks..i will send you all my catalogues..
The pictured legs are only one of many different types that we produce. We are able to modify the size, diameter as well as the production and finishing techniques to meet all client requirements.
If you would have any inquiries don't hesitate to contact me ASAP...
Please look attachment with our production range, if you have your own design please be so kind send me and we will be happy to make samples for you.. If you need metal legs, handles, frames please do not hesitate to contact me ..

Our wood pellets ENPlus A1 are a premium quality, renewable energy source that is made from 100% natural, sustainably-sourced wood. They are manufactured to the highest standards, meeting the strict ENPlus A1 certification requirements.

Our wood pellets are made from compressed sawdust and wood shavings, which are a byproduct of the lumber industry. They are free from additives and chemicals, making them a safe and eco-friendly choice for heating your home or business.

Our ENPlus A1 wood pellets have a low moisture content, high calorific value, and low ash content, which means they burn efficiently and produce minimal ash waste. They are also easy to store and handle, thanks to their uniform shape and size.

Our wood pellets are suitable for use in all types of wood pellet stoves and boilers, and are ideal for residential and commercial heating applications. By using our wood pellets, you can reduce your carbon footprint and contribute to a more sustainable future.

In summary, our wood pellets ENPlus A1 are:

Made from 100% natural, sustainably-sourced wood
Manufactured to the highest standards, meeting the strict ENPlus A1 certification requirements
Free from additives and chemicals
Low moisture content, high calorific value, and low ash content
Easy to store and handle, thanks to their uniform shape and size
Suitable for use in all types of wood pellet stoves and boilers
A safe and eco-friendly choice for heating your home or business

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.

MERRIES, the number one manufacturer of Japanese diapers introduces new line of diapers called First Premium. MERRIES First Premium diapers are two times softer and lighter than the regular MERRIES diapers!
Due to the extremely soft and gentle fabrics used in the process of manufacturing of these diapers, it will be perfectly suitable even for the most sensitive skin. The panties guarantee touches akin to the mild cashmere.
The layer of the diapers that touches the skin of a baby has pure and organic argan oil, which nourishes the skin and gives an extremely pleasant feeling of softness.
The diapers use 100% breathable materials which help to soothe the irritated skin, reduce redness and promote skin regeneration.
Manufacturers have used the best technologies to ensure that thin and soft MERRIES First Premium diapers have best fluid absorption features. The special technology of the diapers guarantees that fluid enters the special absorbent layer and does not touch the skin of a baby thus avoiding any possible skin irritation.
These diapers are produced by using safe and high-quality formaldehyde-free materials because a great number of children are allergic to this specific element. In addition, diapers-pants do not include phthalates and chlorine compounds. The smell of the diapers clearly proves it. MERRIES First Premium diapers are odourless, so no additional fragrances are used to mask chemical odours.
Breathable reusable stickers firmly lock the diapers and help to prevent the fluid leakage. Besides, it does not irritate the sensitive baby skin.
The wetness indicator shows when it is time to change the diapers, when diaper is full, the colour of the wetness indicator changes from yellow to blue.

Our Used Grade A Euro Pallet is robust, versatile, and designed to handle substantial weight with ease.

EPAL certified for guaranteed high quality and performance
1500kg dynamic load capacity for heavy-duty applications
Treated with ISPM15 and KD for unrestricted international use
Convenient 4-way access design with 3 skids and 5 boards

Environmentally friendly wood briquettes for open or closed appliances.

No chemicals or additives
Clean to handle and easy to light
Long burning time and high heat output
Low moisture content and minimal Ash residue.
Perfect to compliment alongside our kiln dried logs for a longer, hotter fire.
Suitable for open fires, multi-fuel stoves, chimeneas and fire pits.
Keep warm this Winter with our Hardwood Briquette Logs 10kg pack*.

Made from Recycled Sawdust from FSC Mixed Sources.
Hardwood Briquettes are renowned for their quality of production resulting in a densely constructed briquettes so you have less mess than other pressed briquettes.
Long burning time and high heat output with less than 10% moisture content and 1% Ash residue.
High density and free from harmful glues so are a natural, carbon neutral alternative to coal or anthracite.
Safe to use with food so excellent for use with barbecues or pizza ovens due to their high heat output.
Can be used as a substitute for kiln dried logs
Help make your firewood load go further with our Hardwood Briquette Logs.

10 kg Pack Contains 5 briquettes. Less than 10% Moisture Content. 4,800 Kwh/Tonne

Store in a dry place.

Firewood BIRCH 25 L (pcs).

One of the main properties of firewood is heat (calorific value).
Calorific value is the size that indicates how much energy a certain amount of burnt firewood emits.

Firewood is divided into three groups of heat:

The first group of heat is wood of oak, ash, birch, hornbeam, maple, elm, with a calorific value of 2250 to 2500 kcal.

The second group of heat is black alder, pine firewood, the caloric content of which is from 1800 to 1900 kcal.

The third group of heat is firewood of alder, aspen, linden, willow, spruce, poplar, with a calorific value of 1500 to 1700 kcal.

Firewood of the first group of heat is the most incandescent, so it is best suited for loaded boilers of higher power, but it is not recommended to fire clay or ovens, since too high combustion temperatures can lead to cracking of cocci or the furnace itself.

We offer broken dried firewood from birch, ash, alder, black alder, aspen wood, neatly placed in rows in wooden containers.
The density of the volume of neatly stacked firewood is significantly higher than that of smashed firewood.
The volume of one container is 1.5 m3 and corresponds to 2 m3 of the volume of combined firewood.

Firewood containers in your yard ?less busy space, garbage, handling after stacking firewood in a firewood shed.

Wooden containers can also replace firewood, just by placing them in the yard in the desired place and covering their top with any coating.
The advantage of the firewood we offer:
*there is no need to overload the translated firewood;
*unloading in a place convenient for you (firewood, pantry, etc.);
*wooden containers remain with the customer;
*quality firewood in convenient packaging at a low price.
We can also offer dry split firewood in bags of 25 ltr. and 40 ltr each.