Other Textile Yarns Wholesale Suppliers, Manufacturers & Distributors in Kyrgyzstan

Medical Ventilator (Model SH300/PA900B/SH200A/)
Ventilation specification Tidal volume
l:E
Monitoring specification VTI, VTE , MV, MVspn Fspn, Frequency, l:E Ppeak, Pmean ,Pplat, Pmin, PEEP Ã¥·³02 Compliance, Resistance P-T, F-T, V-T, P-V loop, V-F loop
20-2500ml Ventilation mode : VCV, VCV +Sigh, PCV, PRVC, SIMV+VCV, SIMV+PCV, SIMV+PRVC ,SPONT (CPAP/PSV) , BIPAP, APRV NIV/CPAP, NIV/PCV 1:10-10:1 lnspiratorytime: 0.1-12 s Pause time Pressure trigger sensitivity Flow trigger sitivity PEEP/CPAP Psupp Pinsp Phigh Plow 02 suction
Ins.Hold Exp.Hold Manual ventilation Waveform Freeze: Yes

Nebulization C02(optional) ETC02(optional) Optional Air compressor Humifier Support arm
0-50%
(PEEP-20 to OcmH20)
1 - 20LPM 0- 50cmH20 0- 70cmH20 5- 70cmH20 21-100% 0- 70cmH20 1 00% 02 ventilation for 2mins 15s Max 15s Max
0-60 minutes adjustable
CE

Jan-26-21

Bs Group

(2.5)

Supplier From Bishkek, Chy, Kyrgyzstan

Medical face masks, 3 and 4 ply medical masks, disposable masks, surgical masks, ffp2 masks, n95, kn95, coverall type 3 4 5 6, isolation gown, shoe cover, head cover, nitrile gloves like cardinals,.Export and import

49 Other Textile Yarns Suppliers

Short on time? Let Other Textile Yarns sellers contact you.

Feb-06-21

Coverall Type 4B/5B/6B

(2.5)

$32

MOQ: MOQ: Not Specified

Bs Group

Supplier From Bishkek, Chy, Kyrgyzstan

Supplier Of Medical Coveralls

Bs Group

Supplier From Bishkek, Chy, Kyrgyzstan

Supplier Of Medical Coveralls

Product name: Coverall type 4B/5B/6B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL

Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodÃ¢??borne pathogens using bacteriophage PhiÃ¢??X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)

Performance requirement ISO standards:
EN 340 General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength

Feb-06-21

Coverall Type 3B

(2.5)

$320

MOQ: MOQ: Not Specified

Bs Group

Supplier From Bishkek, Chy, Kyrgyzstan

Supplier Of Medical Clothing

Bs Group

Supplier From Bishkek, Chy, Kyrgyzstan

Supplier Of Medical Clothing

Product name: Coverall type 3B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL

Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodÃ¢??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)

Performance requirement ISO standards:
EN 340General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Ã¢?? Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength

Feb-17-21

Coverall Type 4B/5B/6B

(2.5)

Ask for price

MOQ: MOQ: Not Specified

Bs Group

Supplier From Bishkek, Chy, Kyrgyzstan

Supplier Of Medical Coveralls

Bs Group

Supplier From Bishkek, Chy, Kyrgyzstan

Supplier Of Medical Coveralls

General Description:
Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration.
Technical specifications
Product name: Coverall type 4B/5B/6B
Elasticated hood around face.
Elasticated cuffs and ankles.
Elasticated sleeves.
Taped seams.
Zipper with re-sealable flap protecting leakage through seams.
Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards.
White color with blue tape
Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm
Lightweight, do not contain rubber/ latex.
Antistatic treated on both sides.
Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard)
Non-sterile
Single Use, disposable
Size: M-XL

Conforms to standards below:
European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards.
EN 13034:2005+A1
EN 14605
EN ISO 13982-1
EN 1073-2
EN ISO 13688
EN 1149-5
Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard)

Performance requirement ISO standards:
EN 340 General requirements
EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test)
EN 14325 Test methods & performance classification
EN ISO 3758 (ISO 3758) Textile care symbols
EN ISO 13935-2 Seam strength

Certificates
CE from notified body
ISO13485
Supplied with
Supplier's instruction for use
Shelf life : As indicated by supplier
Storage conditions : As indicated by supplier
Packaging and labelling : Individually packaged in a transparent plastic bag.
Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English