1: Used to recycle car alternator and generator, can cut and pull copper from scrap car alternator and generator efficiently;
2: Has high machine quality and good machine performance;
3: Has the most advanced technology and best services;
4: Equipped with a pure copper motor, has strong power and best process effect;
BS-D10 small cable granulator is a kind of dry-type copper recycling machine, which is mainly for crushing and separating waste copper particles and plastic skins, so as to achieve the purpose of recycling scrap copper from used waste cable wires.
BS-D10 small wires granulator machine has a small volume and a small output and capacity of processing wires is about 100kg per hour, very suitable for recyclers with few cables or households.
Dry-type small cable granulator does not need to add water for drying and separation, and this copper recycling machine is simple to operate the entire process only requires one worker, which saves both manpower and cost. The dust collection system of the copper granulator machine can effectively collect dust while complying with environmental protection requirements, energy saving, and environmental protection, with zero pollution and zero emissions.
Technical data of this wire granulator machine:
Model: BS-D10 small cable granulator
Processing dimension: Below 20mm
Machine Capacity:100KG/H
Machine weight: 1100KG
Machine size: 2300*1600*2000MM
Motor power: 20KW
Motor voltage: 380V/220V/customized
BS-AN120 copper wire stripping machine is used to strip copper from wires, is an upper and lower adjustable dual boot wire stripping machine that specializes in processing waste cable wires such as submarine cables, high-voltage cables, armored cables, thick net cables, copper-aluminum composite cables, submarine optical fiber (optical fiber) cables and so on.
The wire diameter range that can be processed by our BS-AN120 copper stripping machine is 10-120mm. BS-AN120 cable stripping machine has high working efficiency and fast wire stripping speed, and daily output is about 1000-3000kg.
Cable Stripping Machine BS-AN120 Advantages:
1. Can strip off submarine cables, high-voltage cables, and other scrap cable wires;
2. Simple operation, convenient adjustment, and long service life;
3. High working efficiency and average daily output can reach up to 3000kg;
4. Peeling machine speed can be adjusted at any time according to production requirements.
Our D series cheap copper granulator machine is working, and this testing video show you the machine details and the working process.
a professional copper recycling machine provider, and we supply high-quality copper recycling machines and the best services to our clients.
D series copper wire recycling machine has small and medium processing capacity and has cheap prices, economical and practical.
BS-D70 small copper granulator machine is a small size, small processing capacity, more suitable for household use. BS-D70 small copper granulator machine can process about 70kg of waste cables per hour and the separation sorting rate is about 99.9%. BS-D70 scrap copper recycling machine has a crusher, dust collection system, air separator, vibrating table, and so on. This mini copper wire granulator machine through the crusher separator system, help you get the pure copper and pure plastic at the final. The most important thing is that the BS-D70 copper granulator machine can use single-phase power or three-phase power and customized voltage, which is very convenient. It is really very useful and efficient.
Model: BS-D70 small copper granulator
Processing dimension: Below 20mm
Machine Capacity:70KG/H
Machine weight: 1000KG
Machine size: 1800*1400*2100MM/1700*1500*2000MM
Motor power: 14/16KW
Motor voltage: single phase/three phase voltage
36 Energy Power Services Suppliers
Short on time? Let Energy Power Services sellers contact you.
This electric motor stator cutting machine is a kind of motor wrecker machine. As a cutting tool, that can cut waste motor for copper recycling. Not only can cut motor stator, but also can cut motor shell.
Has two kinds of knives, including flat knives and sharp knives:
Flat knives are used to cut motor shells for removing motor shells;
Sharp knives are used to cut motor stators (copper winding wires);
Often work together with copper motor pulling machine for better recycling copper scrap from motor;
Easy operation and save time and manpower, very useful for scrap copper recycling;
Equipped with copper motor, strong and powerful;
Technology data of motor cutter machine as follows:
Machine model: BSM-50
Motor power: 7.5kw
Machine weight: 650kg
Machine size: 750*550*2150mm
Do you need to recycle your scrap motor? Welcome to know more:
A car starter pulling machine is used in the final step of car starter dismantling, pulling out the copper winding from the scrap motor stator. After the insulating film melts, the copper wire pulling machine pulls copper wires from never cuts the stator side and complete dismantling and copper recycling of the entire automobile starter.
Technical data of car starter puller machine:
Machine Processing Efficiency: More than 350pcs/h
Machine Weight: 460kg
Package Weight: 500kg
Machine Power: 4KW
Electric bike rear wheel copper pulling machine belongs to a kind of motor wrecker machine, suitable for recycling scrap electric bicycle rear wheel motor. This model electric vehicle rear wheel motor pulling machine can pull copper winding wires from scrap motor, often work together with electric vehicle rear wheel motor cutting machine to better recycle scrap copper from the waste motor.
Processing Capacity: 300pcs/h
Machine Weight: 405KG
Motor Power: 4KW
Radiator stripping machine BS-1200P is a hot selling model for stripping copper from aluminum, popular in the scrap copper recycling market.
This radiator recycling machine is often used to process scrap radiators, including car radiators, water tank radiators, copper radiators, ac condenser radiators, etc.
Has mature technology, high machine quality, and good machine performance, got many clients' good feedback, and is very popular in a scrapyard.
Processing capacity is about 600kg per hour;
Technical data of this copper aluminum separating machine:
Processing capacity: 600kg/h
Motor power: 7KW
Machine size: 1800*900*1350mm
Machine weight: 600kg
This new product wire stripping machine is used to strip wires for recycling scrap metal. This wire stripping machine not only can process single-core wires but also can process multi-core wires, very useful and convenient.
Fast processing speed and high working efficiency make this wire stripping machine popular in the copper recycling market, are you
Machine name: wire stripping machine
Processing range: 20-60mm normal cable
Machine size: 900*600*1370mm
Machine weight: 320KG
Motor power: 3KW
Electric vehicle rear wheel motor cutting machine is designed for cutting copper winding wires for easy to recycle copper winding wires from waste electric bicycle rear wheel motor.
This electric bicycle rear wheel motor cutting machine often works together with our electric bicycle rear wheel motor pulling machine to recycle copper winding wires from the waste motor, belongs to an efficient and useful electric motor recycling machine.
Machine name: electric bike rear wheel motor cutter
Motor power: 3KW
Machine size: 980*850*940mm
Machine weight: 170kg
Processing capacity: 300pcs/h
A compressor recycling machine is a kind of waste motor wrecker machine, mainly used to cut and pull copper winding wires from scrap motor. This compressor recycling machine has two functions, including a cutting function and a pulling function.
How to operate this compressor cutting pulling machine
First, you need to cut the motor stator;
And then use the puller to pull all the copper winding wires from the motor stator;
Technology data of compressor recycling machine:
Machine Capacity: 350pcs/h
Machine Weight: 265kg
Machine Size: 84*110*85CM
Machine Power: 3KW
Motor Voltage: Three-phase voltage
Do you have a scrap ceiling fan motor stator that needs to process
Which machine is used in cutting your ceiling fan
This is a new model ceiling fan stator cutting machine working video, cutting copper winding wires for copper scrap recycling.
Using this useful ceiling fan stator cutting machine, you can cut and recycle copper from the motor stator quickly and efficiently, useful and convenient.
Motor power is about 3KW and machine weight is about 267kg.
Are you interested in this new ceiling fan motor cutter
BSGH copper motor cutting pulling machine ST-400 is an electric automatic copper recycling machine, using a hydraulic system to cut and pull scrap motor stator, and then remove and separate copper winding from scrap motors. Our motor wrecker recycling machine also has motor cutting and copper pulling function, simple operation and high working efficiency, making this kind of motor recyclers popular in Europe market.
BSM-40 motor wrecker machine is used to recycle copper from the motor, has multi-function, and can cut and pull copper from motors.
These three pulling parts are fit for recycling different kinds of scrap motor, and this motor wrecker machine can process the motor stator diameter is 50-500mm.
Electric Motor Stator Recycling Machine Technical Data:
Machine Name: Electric motor stator recycling machine
Machine model: BSM-40
Motor Power: 5.5KW
Machine Size: 1940*1430*1150MM
Machine Weight: 670kg
Are you interested in this motor recycling machine BSM-40
Car starter heating machine is a kind of motor wrecker machine and is designed for recycling car starter motor. Car starter heating equipment is mainly used for rapid heating, and melting insulating film to cooperate with car starter pulling recycling machine to pull out copper winding wires because rotor copper wire is wrapped with a layer of the insulation film, which has a strong bonding effect.
And this motor wrecker machine needs to be heated quickly by high-frequency heating equipment to melt the insulation film and facilitate copper winding wires pulling out to achieve scrap copper recycling.
Technical data of this car starter recycling machine:
Machine Name: Car starter heating machine
Machine Processing Efficiency: More than 350pcs/h
Machine Weight: 236kg
Package Weight: 270kg
Machine Size: 1.2 1.2 1.35M
Package Size: 1.3 1.3 1.45M
Machine Power: 85KW
Car starter cutting machine is used to cut off the copper wire of a section of the rotor commutator, which is the first procedure of dismantling the rotor of a car starter, main function is cutting the motor rotor for better recycling copper from the motor.
Our motor copper recycling machine from famous is mainly used for waste car motor starter recycling, for the processing starter motor mainly consists of motor scrap cutting machine, car starter heating machine and car starter puller machine, this 3 machine will cooperate and complete the recycling process, disassembly operations on the used car motor starters that will not be in normal use.
Machine Processing efficiency: more than 350pcs/h
Machine Weight: 200kg
Package Weight: 230kg
Machine Size: 0.8 0.8 1.55m
Package Size: 0.9 0.9 1.65m
Machine Power: 3KW
Washing machine motor recycling machine MR-W is cutting motor stator and pulling copper winding wires from waste washing machine motor.
How to remove a washing machine motor?
No need to dismantle it manually, our washing machine motor recycling machine helps you to solve this problem.
Motor copper cutting pulling machine MR-W is designed for recycling washing machine motors. First, you can use a cutter to cut the stator, and then use a puller with eight jaws to extract all the copper winding wires from the motor.
Technology data of this washing machine motor recycling machine:
Processing Range: 40-75MM
Machine Capacity: 1500 pcs/day
Machine Size: 1120*630*990MM
Machine Weight: 300kg
Motor Power: 2.2KW
Big capacity copper wire granulator machine BS-F3000 is the biggest copper recycling machine of the N series, designed for separating copper rice from plastic skin.
Equipped with an 800S main crusher, air separator, magnetic separator, vibrating tables, and electrostatic separator. After the shredding, crushing, and separating process, the copper price can be separated from plastic skin.
This copper wire recycling machine has high machine quality and good machine performance aimed at the high-end market. You can recycle the waste copper wire and cables into tiny copper and plastic granules, are you interested?
Machine capacity: 1.8-2T/H
Processing range: Under 25mm
Machine weight: 18000kg
Machine size: 15500*9500*2500mm
Motor power: 120KW
36 Energy Power Services Suppliers
Short on time? Let Energy Power Services sellers contact you.
