Find Verified Light Medium Machinery Suppliers, Manufacturers and Wholesalers

Dimensions w1320mm(52in) d680mm(26.8in) h1990mm(78.4in)
Plant population One tier with 40 plants (holes) per tier 5 tiers, capable of cultivating a maximum of 200 plants.
Nutrient solution capacity 100 liters
Transportation weightï¼?70kg/1unit
Estimated weight during cultivationï¼?Up to approximately 250kg/1unit
Voltage AC100V
Outlet type(socket)� :� A
Power consumption LED:360W water pump:38.5w
Material: Plastic,Steel
Manufacture: Japan
Unit price US$6,500~ (Orders of 10 units or more qualify for volume discounts.)
MOQ : 10 unit
FOB YOKOHAMA
Payment Terms T/T, Bank transfer
Delivery date 20-30 business day (Depends on shipping area)

ROBO-1, since its debut in 1995, we have sold over 300 machines in Japan and overseas.
Most of the owners of ROBO-1 are still using the machine and making profit even though they have been running the machine over ten years.
One of ROBO-1 users(stone mason) in northern Europe who runs family stone processing business says investment on this ROBO-1 was not a cheap one but , it was worth it. They bought the ROBO-1 in 1998 and still running it.

What's special about ROBO-1 ? Why has it become the best seller of stone polishing machines even though the price of it is higher than regular gate type polishing machine ?

The biggest reason will be its precision of polishing the stone.
ROBO-1 has an ability to grind and polish the stone, granite or marble, with the gloss checker measurement of 120 maximum. This is due to the fact that the body of ROBO-1 is made of reinforced cast iron. ROBO-1 also is operated by a software that is originally developed by our engineer. This makes the machine enable to polish the stone with the precision of tenth of millimeter.

ROBO-1 is unique with its vivid yellow color and cantilever three axle arm that holds polishing pad one by one up to nine pads.
One arm polishing makes the way of flat stone polishing unique as well.
ROBO-1 is able to polish the stone even it is an odd shape, not square or rectangular but, round or multi corner stone. It is also able to learn the shape of the stone with built in optical sensor and automatically grinds and polishes the stone.

Of course overhauling maintenance of ROBO-1 needs to be done every four or five years in order to keep its ability of polishing.
Our skilled engineers will be able to serve that part as well.

Spiral duct

Garrett ASE831-800 - Used as primary power generators or secondary emergency back ups.

[ Touchless Sanitization ]
Liquid Jet Ejector
- NON-CONTACT, SIMPLE & CLEAN
- Made in Japan

With Liquid Jet, you can sanitize or we your hand just by holding your hand over the device in whatever direction.
Battery operated cordless design makes it installable anywhere.

Infection Control at Hand
For personal desks, rooms and facility entrances such as hotels, hospitals, schools, offices, restaurants, homes, etc.

Specifications
Dimensions: W95 x D85 x H115 (mm)
Weight: 252g (without battery and liquid)
Power Consumption: Inactive: ~0.1W / Active: 3.5W
Power: USB Type-C / Alkaline battery (AA size 1.5V x 2pcs: approx. 500times use)
Standard Accessory: Empty liquid bottle, the liquid to be used: Ethanol for disinfection (ethanol 68wt% (approx. 72vol%))

Liquid Tank Capacity: 70ml (approx. 1000 times use)
Note:
- Disinfectant liquid and battery are not included
- Patent pending

[YouTube]
https://youtu.be/l0MBN4ZiJyU

[PDF Downloads]
1. catalog - C PLUS 3 liquid jet ejector
http://solid-corp.com/wp-content/uploads/catalog-C-PLUS-3-liquid-jet-ejector.pdf

2. liquid cautions
http://solid-corp.com/wp-content/uploads/liquid-cautions.pdf

3. liquid jet comparison
http://solid-corp.com/wp-content/uploads/liquid-jet-comparison.pdf

4. packing - liquid jet
https://solid-corp.com/wp-content/uploads/liquid-jet-comparison.pdf

Car starter heating recycling machine is mainly used for rapid heating, melting insulating film to cooperate with car starter pulling recycling machine to pull out copper winding wires, because rotor copper wire is wrapped with a layer of insulation film, which has a strong bonding effect. And it needs to be heated quickly by high-frequency heating equipment to melt the insulation film and facilitate copper winding wires pulling out to achieve copper recycling.

BS-D30 wire granulator machine with magnetic separator finished production.

Medium capacity copper recycling machine :
Main use is processing cable wires, granulating and separating clean tiny copper;
Processing capacity is about 300KG/H;
Equipped with magnetic separator for removing iron from copper;
Has high copper separating rate(99.9% copper separating rate make you get pure tiny copper).

How to cut and shred cable scraps

This model copper cable shredder machine is often used to cut wires into small pieces, and it often works together with our copper granulator machine to granulate and separate copper from cable wires.
Two-shaft design, high torque, and low speed, and has long machine life.
So do you need this model cable wire shredding machine

Big capacity copper wire granulator machine BS-F3000 is the biggest copper recycling machine of the N series, designed for separating copper rice from plastic skin.

Equipped with an 800S main crusher, air separator, magnetic separator, vibrating tables, and electrostatic separator. After the shredding, crushing, and separating process, the copper price can be separated from plastic skin.
This copper wire recycling machine has high machine quality and good machine performance aimed at the high-end market. You can recycle the waste copper wire and cables into tiny copper and plastic granules, are you interested?

Machine capacity: 1.8-2T/H
Processing range: Under 25mm
Machine weight: 18000kg
Machine size: 15500*9500*2500mm
Motor power: 120KW

Radiator stripping machine BS-1200P is a hot selling model for stripping copper from aluminum, popular in the scrap copper recycling market.

This radiator recycling machine is often used to process scrap radiators, including car radiators, water tank radiators, copper radiators, ac condenser radiators, etc.
Has mature technology, high machine quality, and good machine performance, got many clients' good feedback, and is very popular in a scrapyard.
Processing capacity is about 600kg per hour;

Technical data of this copper aluminum separating machine:
Processing capacity: 600kg/h
Motor power: 7KW
Machine size: 1800*900*1350mm
Machine weight: 600kg

This new product wire stripping machine is used to strip wires for recycling scrap metal. This wire stripping machine not only can process single-core wires but also can process multi-core wires, very useful and convenient.
Fast processing speed and high working efficiency make this wire stripping machine popular in the copper recycling market, are you

Machine name: wire stripping machine
Processing range: 20-60mm normal cable
Machine size: 900*600*1370mm
Machine weight: 320KG
Motor power: 3KW

The new finished ACSR wire chopper line is in hot selling, and used to recycle and crush ACSR wires.
This big-capacity ACSR wire recycling machine has good machine performance, you will receive pure aluminum and pure iron.

Our car generator pulling machine is used to pull copper winding wires from scrap motor stator and often works together with motor cutting machine for dismantling and recycling of automobile generators.

First, scrap copper wire at one end of the stator is cut by a cutter of a motor wrecker machine to facilitate the operator to pull out the copper wire from the other end, and then the copper puller removes the copper wire from the other end. Pull it sideways to complete the disassembly and recycling process.

Car alternator pulling machine details:
Name: Car generator puller machine
Machine Weight: 220KG
Machine Size: 1100*770*1000MM
Machine Power: 4KW
Motor Voltage: Three-phase voltage

Electric bike rear wheel copper pulling machine belongs to a kind of motor wrecker machine, suitable for recycling scrap electric bicycle rear wheel motor. This model electric vehicle rear wheel motor pulling machine can pull copper winding wires from scrap motor, often work together with electric vehicle rear wheel motor cutting machine to better recycle scrap copper from the waste motor.

Processing Capacity: 300pcs/h
Machine Weight: 405KG
Motor Power: 4KW