Find Verified Detergent Chemicals Suppliers, Manufacturers and Wholesalers

LifeChem KB 222 is a specialty formulated hand soap which is pH
balanced for all skin types. This hand soap not only cleans but
special moisturizing additive add freshness & leaves a smooth
feel.
LifeChem KB 222 do not produce a slippery feeling unlike most other
hand soaps and do not require excessive flushing to remove the
slippery feel.
Presented in a fresh fragrance without reducing the quality of the
product. Concentrated product suitable for use in public toilets
after dilution.
Application:
1. Pour one drop on the palm of your hand
2. Put water and rub both the hands to produce a gentle lather
3. Wash and flush with clean
Dosage:
Can be used undiluted directly. Can also be used by diluting with clean
water up to a ratio of 1:5 ( 1 part of LifeChem Hand Soap dilute with 5 parts of
clean water )
Handling & Precaution:
Do not get contact with eyes. Harmful if swallowed.
Packaging:
Available in cup 165 gr.. Can also be custom packaged

Purified Terephtalic acid Off Grade. Colour : White, Cream white, light brown, grey, brown and yellow. All of them are dry. Packaging: Bag @ 1,1MT. 300 - 450 USD / MT. From Indonesia. Minimum Order: 25 MT. Only FOB

LC 100 ideal to remove not only calcium carbonate &
calcium phosphate deposits but also calcium sulfate
and barium sulfate as well.

Application LC 231 is a special blend of volatile acids,
corrosion inhibitors & dispersing agents. It effectively
removes scale and soil of carbonate nature from metal
and other surfaces. LC 231 is an excellent additive for
the LC 233 for the initial removal of the carbonate based
scale and effectively bring down cost by reducing the
amount of other descalers. Its acid formulation dissolves
lime scale and rust deep down with the selective inhibitors
protecting metal surfaces.
Application
Spray or brush on surfaces. Clean surface free from rust, soil and dirt. Apply
LC 231. Allow to stand for 2-5 minutes, scrub thoroughly and re-apply. Repeat
and then flush off with water. Flush with water until all scale is removed. Add
with other descaler like LC 232 & LC 233 for stubborn and difficult to remove
scales. Cannot be used alone.
Dosage
Dilute one part of LC 231 with up to 10 parts of water depending on the
thickness of scales.
Handling & Precaution
Irritating to eyes and skin. Protective clothing and eye protection should be
provided and worn. After contact with skin, wash immediately with plenty of
water. In case of eye contact irrigate thoroughly with water for at least 15
minutes. Seek medical advice.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Lc 250 is a water displacing anti corrosion compound
Used to prevent rust on metal surfaces with unlimited
Applications in the fields of marine, automobile, aviation
Farming, etc.
Lc 250 creeps along surfaces and into cracks to
Lubricate, loosen frozen parts and displace water. The
Loosened rust can easily be removed. The displacing
Mechanism works by preferential wetting. The attraction,
Of the preventative that of water, thus displacing water.
Application
Apply lc 250 to metal surfaces either by brushing or dipping.
When dipping is used, allow excess chemical to drip prior to
Storage.
Handling & precaution
Avoid unnecessary skin contact. Prolonged contact may cause
Irritation.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Clean the floor with a perfect and refreshing fragrance.

Remove impurities in the form of carbon from the surface of the oven, cooking utensils, sewer, ventilation, and other places where carbon deposition thickness is usually attached.

Lc 106 is an ideal steam line anti corrosion treatment for
Boilers. It is a highly concentrated, alkaline product.
Eliminates corrosion in the outgoing steam lines and
Stabilizes ph in the condensate.
Application
For use with boilers which requires anti-corrosion treatment in the steam lines. It
Disperses with steam and forms a protection film on the inner surfaces of the
Steam pipes. Injected directly into the boiler by means of a proportioning pump.
It is environmentally safe. Do not use in boilers where steam
Contacts food.
Dosage
Initial : 1 quarts per 100 gallons or 1 : 400
Maintenance: 1 quart for every 200 gallons of make-up water or 1 : 800
Maintain ph of 7.5 – 8.5 in the steam line of system. Maintain sulfite of 30 – 60
Ppm along with lc 106. Maintain the conductivity less than 5000 mho/cm.
Handling & precaution
Lc 106 is an alkaline product and should be handled with care to prevent
Personal injury. Wear protective clothing and eye protection. In case of contact
With skin, immediately flush with water. In case of contact with eye, flush with
Water for 15 minutes and obtain immediate medical attention. Triple rinse used
Cans before reuse or disposal.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Lc 120 is a product which effectively prevents scale and
Corrosion in cooling towers having very soft waters which
Are more corrosive, have a rysnar index over 7 and
Calcium 25 – 75 ppm in the make-up water. It is an
Excellent dispersant for calcium phosphate, iron oxides
And clay. This product is used where heavy metals and
Zinc is not allowed in effluent waters. Lc 120 is a
Hydroxy-phosphonoacetic acid with polymers and copolymers
To control scaling. It also has inorganic
Phosphate and sodium tolytriazole to prevent corrosion
And pitting of all metal surfaces.
Application
Injected directly into the circulating pipe upstream from the condenser.
Cycles of concentration will vary from 5 – 20 as a probable upper limit. For
Higher limits consult our laboratory.
Dosage
Feed lc 120 from a chemical mix tank or directly from the drum by means
Of a proportioning pump at the rate of 0.5 pound / 1, 000 gallons of make-up
Water. Adjust the dosage to maintain 5 – 10 ppm of orthophosphate in the
Circulating water. A ph of 8.0 – 8.5 must be maintained.
Handling & precaution
Protective clothing and eye protection should be worn. In case of skin
Contact, immediately flush thoroughly with plenty of clean water. In case of
Eye contact, flush with copious of amounts of water for 15 minutes and
Obtain immediate medical attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged


.

Lc 143 is specially formulated for use in systems that are
Constantly exposed to air, such as vented air to pressurized
Systems providing corrosion protection even in systems that
Are not tight. It reduces maintenance costs by keeping
Exchangers, air handling units and zone valves free of
Corrosion clogs. It also reduces corrosion insulation and
System damage. Lc 143 contains boron nitrate that protects
Against oxygen and acid attack, works well in any closed
System. Recommended for any hot water boiler or recirculating
Or closed loop system.
Application
Can be added to a system either manually or with a pot feeder. If the
Treatment dosage is less that the capacity of feeder, fill up the feeder with
Tap water to prevent air on treatment. Not to be used in electric
Steam boilers.
Dosage
For chilled water circulating system : for initial or maintenance treatment,
Add 1 gallon of lc 143 for each 200 gallons of chilled water. The treatment
Level is easily tested with the drop titration nitrite test kit.
Handling & precaution
Irritant. Avoid contact with eyes. Avoid repeated or prolonged contact with
Skin. If contact occurs, flush with water. If eye contact occurs, flush with
Water for 15 minutes. Seek medical attention. Keep out of reach of
Children. Refer to material safety data sheet for more specific procedures.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.